Straight-through microchannel devices for generating monodisperse emulsion droplets several microns in size

The authors recently proposed a promising technique for producing monodisperse emulsions using a straight-through microchannel (MC) device composed of an array of microfabricated oblong holes. This research developed new straight-through MC devices with tens of thousands of oblong channels of several microns in size on a silicon-on-insulator plate, and investigated the emulsification characteristics using the microfabricated straight-through MC devices. Monodisperse oil-in-water (O/W) and W/O emulsions with average droplet diameters of 4.4–9.8 μm and coefficients of variation of less than 6% were stably produced using surface-treated straight-through MC devices that included uniformly sized oblong channels with equivalent diameters of 1.7–5.4 μm. The droplet size of the resultant emulsions depended greatly on the size of the preceding oblong channels. The emulsification process using the straight-through MC devices developed in this research had very high apparent energy efficiencies of 47–60%, defined as (actual energy input applied to droplet generation/theoretical minimum energy input necessary for making droplets) × 100. Straight-through MC devices with numerous oblong microfluidic channels also have great potential for increasing the productivity of monodisperse fine emulsions.     

Gradually intractable problems and nondeterministic log-space lower bounds

The paper places five different problems (thek-pebble game problem, two problems aboutk finite automata, the reachability problem for Petri nets withk tokens, and the teachability problem for graphs whose k-dimensional edge sets are described by Cartesian products ofk factors) into the hierarchyNL _k of problems solvable by nondeterministic Turing machines ink-log₂ n space (and binary tape alphabet, to avoid tape speed-up). The results, when combined with the conjecture thatNL _i contains problems that requireO(n ^k ) deterministic time, show that these problems, while inP for every fixed value ofk, have polynomial deterministic time complexities with the degree of the polynomial growing linearly with the parameterk, and hence are, in this sense, gradually intractable.     

Imitating others by composition of primitive actions: A neuro-dynamic model

This paper introduces a novel neuro-dynamical model that accounts for possible mechanisms of action imitation and learning. It is considered that imitation learning requires at least two classes of generalization. One is generalization over sensory–motor trajectory variances, and the other class is on cognitive level which concerns on more qualitative understanding of compositional actions by own and others which do not necessarily depend on exact trajectories. This paper describes a possible model dealing with these classes of generalization by focusing on the problem of action compositionality. The model was evaluated in the experiments using a small humanoid robot. The robot was trained with a set of different actions concerning object manipulations which can be decomposed into sequences of action primitives. Then the robot was asked to imitate a novel compositional action demonstrated by a human subject which are composed from prior-learned action primitives. The results showed that the novel action can be successfully imitated by decomposing and composing it with the primitives by means of organizing unified intentional representation hosted by mirror neurons even though the trajectory-level appearance is different between the ones of observed and those of self-generated.     

Structure,transport properties,and dielectric properties of lactic acid/pyruvic acid aqueous solution in a biofuel cell: A molecular simulation study

Molecular dynamics (MD) simulation of lactic acid (L‐acid) and pyruvic acid (P‐acid) in a physiological salt solution has been performed, which is used as the electrolyte in a sort of biofuel cell working on a human skin. The structure, frequency distribution of molecules, dielectric properties, rotational correlation functions, and diffusion coefficients have been calculated. The anomalous behavior of dielectric constants for the lower concentration of L‐acid and P‐acid has been obtained from MD. The anomalous dielectric constant is discussed in relation with the various physical properties of the solution including the life time of the interaction in the solution. MD results suggest that the anomalous behavior is supposed to be attributed to the difference of interactions between ions in the lower and higher concentration region. POLYM. ENG. SCI., 59:2474–2478, 2019. © 2019 Society of Plastics Engineers     

Synthesis of New Pb-Based 1222 Cuprates Containing Phosphorus, (Pb0.75P0.25)Sr2(RE2–x–y Ce x Sr y )Cu2O z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y)

New Pb-based 1222 cuprates containing phosphorus have been synthesized in the (Pb_0.75P_0.25)Sr₂- (RE_2–x–y Ce _x Sr _y )Cu₂O _z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y) systems. The almost-single phase samples are obtained for 0.5≤x≤1.0 and y=0.1 in the cases of RE = Nd, Dy, Ho, Er, Tm, Yb and Y, while for 0.3≤x≤1.0 and y=0.1 in the cases of RE = Sm, Eu and Gd. The samples crystallize in a tetragonal lattice, the lattice parameters a and c are decreasing with the decrease of the ionic radius of the RE element. Even after annealing under 143 atm O₂ atmosphere at 400 °C, almost all the samples with the common values x=0.5 and y=0.1 are semiconductors with a transport process followed by three-dimensional variable range hopping. However, the samples of RE = Sm, Eu and Gd, which are of almost single 1222 phase, even for x=0.3 and y=0.1, show superconductivity with the onsets at about 25 K, 20 K and 22 K, respectively. Through this study, we find very important procedure for discovery of new superconducting 1222 compound.     

Conversion of aqueous extracts from thermochemical treatment of bagasse into functional emulsifiers

Synthetic emulsifiers in food industries are being replaced with a customer-friendly food ingredient that is derived from biomass using sustainable green technologies. After hydrothermal liquefaction treatment, raw bagasse (21%), pith (26%), and rind portions (25%) were obtained with reduced ash contents. As aqueous extracts, with oligosaccharides and lignin residues, it was used in the preparation of oil-in-water emulsions with 5% soybean oil. Results showed that the emulsions stabilised the oil droplets with particle size between 11 and 17 µm by steric repulsion with raw bagasse-stabilised emulsion showing a better stability at 25 °C (31 days). It was demonstrated that raw bagasse extracts, without alteration, maybe a potential unconventional source for food-grade emulsifiers by integrating a versatile thermochemical conversion of waste without the use of chemicals.     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.     

Development of a simple capillary electrophoretic determination of glucosamine in nutritional supplements using in-capillary derivatisation with o-phthalaldehyde

A simple capillary electrophoretic method was developed for the determination of glucosamine using in-capillary derivatisation. Glucosamine in commercial products was extracted with purified water. The CE separation was achieved on an uncoated fused-silica capillary using a 20 mM borate buffer (pH 9.2) containing 5 mM o-phthalaldehyde (OPA) and 5 mM 3-mercaptopropionic acid (MPA) at 25 kV, followed by UV detection at 340 nm. The detector response was linear (r² > 0.999) in the concentration range 10–1000 μg/mL. The limit of detection (LOD) was 1.3 mg/g. Spiked glucosamine recoveries at 50 and 100 mg/g level were 95.1% and 104.3%, respectively. The method was applied to 16 commercial products. The concentrations of glucosamine were 109–705 mg/g, and the ratios of detected glucosamine content to the labelled value were 88.8–124%. No significant bias was observed (r² = 0.989, p < 0.01), between results obtained by the proposed CE method and an official colorimetric method (Japanese Health Food & Nutrition Food Association).     

Thermal and mechanical properties of bio-based polymer networks by thiol-ene photopolymerizations of gallic acid and pyrogallol derivatives

Allylated pyrogallol (A3PG) and acrylated pyrogallol (Ac3PG) as bio-based trienes, and allylated gallic acid (A4GA) and acrylated allyl gallate (Ac3A1GA) as bio-based tetraenes were synthesized from pyrogallol and gallic acid, respectively. Thiol-ene photopolymerizations of the bio-based polyenes and a pentaerythritol-based primary tetrathiol (pS4P) at the allyl/SH ratio of 1/1 produced photo-cured resins (A3PG-pS4P, Ac3PG-pS4P, A4GA-pS4P and Ac3A1GA-pS4P). The FT-IR spectral analysis revealed that thiol-ene reactions of thiol/allyl and thiol/acryloyl groups smoothly proceeded. Gel fractions of acryl-based cured resins were a little higher than those of allyl-based cured resins. The swelling test and dynamic mechanical analysis revealed that GA- and acryl-based cured resins exhibited higher crosslinking densities than PG- and allyl-based cured resins, respectively. A higher order of tan δ peak temperature was Ac3PG-pS4P (48.3 ° C) > Ac3A1GA-pS4P (24.1 ° C) > A4GA-pS4P (22.1 ° C) > A3PG-pS4P (?7.8 ° C). Ac3PG-pS4P displayed the highest 5 % weight loss temperature, tensile strength and tensile modulus among all of the cured resins.