Gas Transport Parameters for Compacted Reddish-Brown Soil in Sri Lankan Landfill Final Cover

Gas exchange through the compacted final cover soil at landfill sites plays a vital role for emission, fate, and transport of toxic landfill gases. This study involved measuring the soil-gas diffusivity (Dp/Do, the ratio of gas diffusion coefficients in soil and free air) and air permeability (ka) for differently compacted soil samples (reddish-brown soil) from the final cover at the Maharagama landfill in Sri Lanka. The samples were prepared by either standard Proctor compaction or hand compaction to dry bulk densities of 1.60–1.94??g?cm-3. Existing and modified models for predicting Dp/Do and ka were tested against the measured data. The simple, single-parameter Buckingham model predicted measured Dp/Do values across compaction levels equally well or better than a dry bulk density (DBD) dependent model and a soil-water retention (SWR) dependent model. The measured ka values for differently compacted samples were highly affected by the compaction level and the sample moisture preparation method. Also, for air permeability, a single-parameter Buckingham-type ka model was most accurate in predicting ka in the differently compacted soil samples. Equivalent air-filled pore diameters (the effective diameter of the drained pores active in leading air through the sample) for gas flow, deq, were calculated from the measured Dp/D0 and ka values. The deq increased with compaction level, suggesting that a very high compaction level creates well-connected macropores in the reduced total pore space of the cover soil. This is an important consideration when designing cover soils for optimally low water and high oxygen exchange while minimizing climate and toxic gas emissions from the waste layer to the atmosphere.     

Effects of surface treatments of superdrawn polyoxymethylene fibers on adhesion to epoxy resins

Strong adhesion in the superdrawn polyoxymethylene (POM) fiber/epoxy matrix system was achieved with surface treatments, 2H-hexafluoro-2-propanol (HFP) treatment, and surface phenolation of the fiber. HFP produced micropits for mechanical interlocking with the matrix. Surface phenolation formed active layers leading to interfacial miscibility. © 1996 John Wiley & Sons, Inc.     

Experimental study of impingement cooling by heat sinks with thin longitudinal fins for LSI packages

This paper reports on the impingement cooling characteristics of a heat sink with thin longitudinal fins of 0.2 mm thickness, which are spaced with a fin-pitch in the range 0.5 mm to 2.0 mm. The air cooling of the heat sink comes from a slot-shaped orifice positioned above the heat-sink center. The breadth of the gap between the fin tops and the inlet orifice is in the range 0 mm to 10 mm. The thermal resistance of the thin longitudinal fins used is about 50% to 57% that of the thick longitudinal fins now in commercial use. The cooling performance of the thin-plate fins is almost the same as that of optimally arranged pin-fins with the same total surface area. A maximum value of six times the heat transfer rate of a single flat plate having the same base area was observed for the thin-plate fins. A comparison of cooling performance between impingement and channel flow systems was conducted. The performance of impingement cooling systems is almost unaffected by the breadth of the gap between the fin tops and the inlet orifice (or, for channel cooling, the upper wall). On the other hand, the performance of channel-cooling systems decreases significantly as the gap widens. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(7): 449–459, 1996     

Patterning of Non-Linear Optical Crystals in Glass by Laser-Induced Crystallization

This paper reports recent progress in the patterning of non-linear optical crystals on the glass surface by laser irradiation. Two techniques for the writing of crystal lines have been developed, i.e., rare-earth (samarium) atom heat processing and transition metal atom heat processing, in which a continuous wave Nd:YAG laser (wavelength: λ=1064 nm) is irradiated to the glasses containing rare-earth (RE: Sm³⁺, Dy³⁺) ions or transition metal (TM: Ni²⁺, Fe²⁺, V⁴⁺) ions. The writing of crystal lines such as β-BaB₂O₄, Sm _x Bi_{1− x} BO₃, and Ba₂TiGe₂O₈ showing second harmonic generations has been successful. It is clarified from the azimuthal dependence of second harmonic intensity and polarized micro-Raman scattering spectra that crystal lines consist of highly oriented crystals along the crystal line growth direction. It is also possible to write two-dimensional crystal bending or curved lines by just changing the laser scanning direction. The mechanism of the laser-induced crystallization has been proposed.     

Effect of GeV-Ion irradiation on magnetic properties of Fe–Ni invar alloys

High-energy ion irradiation was performed using a ring-cyclotron installed at the Institute of Physical and Chemical Research (RIKEN). The incident ions were Ta with the energy of 3.71 GeV, and the fluence was fixed to 5 × 10¹² ions/cm². As a target, three sheets of square plates of Fe–30.2 at.% Ni invar alloys were put one upon another. The shift of the Curie temperature T_C of the first sample was 14 K, while that of the second one was 22 K. Comparing these two, the shift was as large as 46 K in the last sample in which ions stopped in the middle. It was concluded that there are at least two different mechanisms that contribute to the shift of T_C.     

Effect of gamma radiolysis on pit initiation of zircaloy-2 in water containing sea salt

In spent fuel pools at the Fukushima Daiichi Nuclear Power Station (1F), seawater was injected for cooling purposes after the tsunami disaster in March 2011. It is well known that the chloride in the seawater has the potential to cause localized corrosion (e.g., pitting corrosion) in metals. In this study, we evaluated the pitting potentials of zircaloy-2, the material used in the fuel cladding tubes in 1F, as a function of chloride concentration. To accomplish this, we used artificial seawater under gamma-ray irradiation and investigated the effect of radiolysis on pit initiation of zircaloy-2 in water containing sea salt. Changes in the composition of water containing sea salt were analyzed as well, both before and after gamma-ray irradiation. The characteristics of the resultant oxide films formed on zircaloy-2 were evaluated by X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy. The experimental results showed that the pitting potential under irradiation was slightly higher than that under conditions in which no radiation was present, and that the pitting potential decreased with increasing chloride concentration in the presence as well as the absence of radiation. Solution analyses for water containing sea salt showed that hydrogen peroxide was generated by irradiation. The oxide film was composed of zirconium oxide and was made thicker during the irradiation. The higher pitting potential could thus be explained by the capacity of hydrogen peroxide to oxidize the surface and enhance oxide film formation. Under gamma-ray irradiation, the zircaloy-2 surface with an oxide film formed by radiolysis products was found to be resistant to pitting in the presence of chloride.     

Efficient usage of highly dispersed Pt on carbon nanotubes for electrode catalysts of polymer electrolyte fuel cells

A Pt-deposited carbon nanotube (CNT) shows higher performance than a commercial Pt-deposited carbon black (CB) with reducing 60% Pt load per electrode area in polymer electrolyte fuel cells (PEFCs) below 500 mA/cm². K₂PtCl₄ and H₂PtCl₆·6(H₂O) are used for the Pt deposition onto multi-walled CNTs (MWCNTs), which are produced by the catalytic decomposition of hydrocarbons. The electric power densities produced using the Pt/CNT electrodes are greater than that of the Pt/CB by a factor of two to four on the basis of the Pt load per power. CNTs are thus found to be a good support of Pt particles for PEFC electrodes. TEM images show 2–4-nm Pt nanoparticles dispersed on the CNT surfaces. These high performances are considered to be due to the efficient formation of the triple-phase boundaries of gas–electrode–electrolyte. The mechanisms of Pt deposition are discussed for these Pt-deposited CNTs.     

Surface modification of contact lenses using adsorption of ethylene oxide branched copolymers

To examine methods for reducing the amount of adsorbed protein on the surface of contact lenses during use, cationic copolymers containing poly(ethylene oxide) units were synthesized and evaluated as surface modifiers. Poly(ethylene oxide) graft‐branched copolymers of composition 70 mol % dimethylaminoethyl methacrylate (DM) and 30 mol % methoxy polyethylene glycol methacrylate (Mp0G; p = 2, 4, 9; the average number of the ethylene oxide units) were obtained using nonionic monomers containing poly(ethylene oxide) units. The copolymers very efficiently prevented protein adsorption on a contact lens. Contact angle measurements showed that immersion in tear fluid made the lens surface hydrophobic because of adsorption of proteins with hydrophobic residues. The copolymer pretreatment made the lens surface hydrophilic, even after dipping in artificial tear fluid. These results suggest that adsorption of the poly(ethylene oxide) branched copolymer on the contact lens would make the lens surface hydrophilic and prevent protein adsorption. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Optical Active Nano-Glass-Ceramics

This paper reviews the synthesis and characterization of several transparent glass-ceramics with optical active nanocrystals. Glass-ceramics containing ferroelectric Sr_xBa_1-xNb₂O₆ nanocrystals with an ellipsoidal shape show optical phase modulations in the presence of alternative electric fields. In the glass-ceramics with Ba₂TiSi₂O₈ (BTS) nanocrystals, BTS crystalline layers with a thickness of approximately 120 nm are formed at the surface and ellipsoidal-shaped crystallites with a diameter of 100–200 nm are dispersed in the glass matrix. Some TeO₂-based and GeO₂-based glasses show a prominent nanocrystallization. RE-doped CaF₂ nanocrystals are patterned in a spatially selected region by laser irradiations. The size, morphology, and dispersion state of nanocrystals should be carefully checked in each glass system and composition. The basic concept for the design of glass system and composition is also discussed. Some data on optical active performances in transparent glass-ceramics with nanocrystals were introduced.