Graphitization of carbon fibre/ glassy carbon composites

Carbon fibre/glassy carbon composites were prepared by aligning unidirectionally in furfuryl alcohol condensate the PAN-based carbon fibres treated at different temperatures and with different degrees of stretching. The graphitization of the composites was found to start at the boundary between the fibres and glassy carbon matrix, and to proceed into the matrix. This is considered to be due to the stress accumulation at the boundary caused by a large shrinkage of the matrix. The carbon fibres remain nongraphitized even after a heat-treatment at 2800°C. The composites heat-treated at high temperature (2800°C) are found to show a high overall degree of graphitization, unexpected on basis of the known graphitization behavior of carbon fibres and of glassy carbon, and a high degree of uniaxial preferred orientation of crystallites.     

Deposition of Lead Phosphate by Lead-Tolerant Bacteria Isolated from Fresh Water near an Abandoned Mine

Specialist bacteria can synthesize nanoparticles from various metal ions in solution. Metal recovery with high efficiency can be achieved by metal-tolerant microorganisms that proliferate in a concentrated metal solution. In this study, we isolated bacteria (Pseudomonas sp. strain KKY-29) from a bacterial library collected from water near an abandoned mine in Komatsu City, Ishikawa Prefecture, Japan. KKY-29 was maintained in nutrient medium with lead acetate and synthesized hydrocerussite and pyromorphite nanoparticles inside the cell; KKY-29 also survived nanoparticle synthesis. Quantitative PCR analysis of genes related to phosphate metabolism showed that KKY-29 decomposed organic phosphorus to synthesize lead phosphate. KKY-29 also deposited various metal ions and synthesized metal nanoparticles when incubated in various metal salt solutions other than lead. The present study considers the development of biotechnology to recover lead as an economically valuable material.     

Cause–effect analysis on Fukushima accident reports – What did McMaster undergraduate students learn?

In the ENG PHYS 4ES3 Course “Special Topics in Energy Systems (2014–2015)” in McMaster University, sixteen 4th-year undergraduate students studied the Fukushima accident, discussed the causes of accident and its impacts on the energy systems from the sustainability point of view, made the oral presentation and submitted the reports. In this paper, a cause–effect and causal-loop analysis was applied to the discussion in the reports, the diagram of cause–effect relationship was drawn, and the important problems were extracted from the diagram. It was found that the important problems and the diagram of cause–effect relationship McMaster undergraduate students considered were similar to the essential problems and the diagram Horii pointed out, although Interim Report of the Investigation Committee on the Accident at Fukushima Nuclear Stations of Tokyo Electric Power Company which Horii used was not adopted in the reports submitted by students.     

Anisotropic proton-conducting membranes prepared from swift heavy ion-beam irradiated ETFE films

Poly(ethylene-co-tetrafluoroethylene) (ETFE) films were irradiated by swift heavy ion-beams of ¹²⁹Xe²³⁺ with fluences of 0, 3 × 10⁶, 3 × 10⁷, 3 × 10⁸ and 3 × 10⁹ ions/cm², followed by γ-ray pre-irradiation for radiation grafting of styrene onto the ETFE films and sulfonation of the grafted ETFE films to prepare highly anisotropic proton-conducting membranes. The fluence of Xe ions and the addition of water in the grafting solvent were examined to determine their effect on the proton conductivity of the resultant membranes. It was found that the polymer electrolyte membrane prepared by grafting the styrene monomer in a mixture of 67% isopropanol and 33% water to the ETFE film with an ion-beam irradiation fluence of 3.0 × 10⁶ ions/cm² was a highly anisotropic proton-conducting material, as the proton conductivity was three or more times higher in the thickness direction than in the surface direction of the membrane.     

Analysis of imazalil and its major metabolite in citrus fruits by GC-FTD

A simplified simultaneous analytical method of imazalil (IZ) and its major metabolite, alpha-(2,4-dichlorophenyl)-1H-imidazole-1-ethanol (IZM), in citrus fruits was developed, and commodities samples were investigated. A homogenate of citrus fruits was extracted with ethyl acetate under basic conditions. The crude extract was partitioned between 0.025 mol/L of sulfuric acid and ethyl acetate. The analytes were extracted from the aqueous fraction under basic conditions with ethyl acetate. The extract solution was purified with an ENVI-Carb cartridge, and then analyzed by GC-FTD and GC/MS. Recoveries of IZ and IZM added to grapefruit at the level of 0.05 microgram/g were 90.0 and 108.7%, and those in the case of lemon were 100.4 and 93.0%, respectively. The detection limits were 0.01 microgram/g in samples. By this method, IZ and IZM were analyzed in 46 citrus fruits on the market and were detected simultaneously in some samples.     

Inhibitory effect of magnosalin derived from Flos magnoliae on tube formation of rat vascular endothelial cells during the angiogenic process

An aqueous water extract of Flos magnoliae, a Japanese Sino-medicine, inhibits angiogenesis in adjuvant-induced mouse pouch granuloma. Magnosalin (MSA) and magnoshinin (MSI), neolignans isolated from magnolia, have a crucial role in the anti-angiogenic effect of magnolia (Kimura et al., Int. Arch. Allergy Appl. Immunol., 93, 365 (1990); Phytother. Res., 6, 209 (1992)). We investigated the effects of these neolignans on tube formation of endothelial cells (EC) cultured in type I collagen gel during the angiogenic process. MSA (0.1-10 microM), MSI (0.23-7 microM) and corticosterone (CS: 0.3-30 microM) inhibited fetal bovine serum (FBS)-stimulated tube formation in a concentration-dependent manner. Their 30% inhibitory concentration (IC30, 95% confidence limits) values were 0.51 (0.20-1.27) for MSA, 8.14 (2.48-26.7) for MSI and 3.65 microM (2.47-5.40) for CS, respectively. MSA and MSI (1-3 microM) also inhibited interleukin (IL)-1 alpha-stimulated tube formation in a concentration-dependent manner. Their IC50 values (95% confidence limits) were 1.22 (1.01-1.47) for MSA and 0.74 microM (0.24-2.31) for MSI against a submaximal concentration (69 pM) of IL-1 alpha-stimulated tube formation. Their inhibitory effects on the action of IL-1 alpha were non-competitive. These results demonstrate that MSA inhibited FBS-stimulated tube formation with a greater potency than MSI. The inhibitory effect of MSA on the action of FBS differed from that on the action of IL-1 alpha.     

Mechanochemical block copolymerization in heterogeneous systems of the solid poly(vinyl chloride) with styrene by ultrasonic irradiation

Summary Mechanochemical block copolymerization in heterogeneous systems of the solid poly(vinyl chloride)-styrene-sodium dodecyl sulfate aqueous solutions has been studied by ultrasonic irradiation at 65 °C. The block copolymerization of styrene was initiated by free radicals produced from the poly(vinyl chloride) particles by ultrasonic waves. The initial rate of the block copolymerization Rp was given by Rp α [Styrene] [Sodium dodecyl sulfate]^1/2. Both copolymer and homopolymer were obtained. For example, when 2.506 g of the poly(vinyl chloride) particles, 24.23 g of styrene, and 54.00 g of sodium dodecyl sulfate aqueous solution (0.500 wt%) were added in the reaction system, the weight proportions of the block copolymer and polystyrene after 60 min were approximately 50 and 20%.     

The effect of the framework structure on the chemical properties of the vanadium oxide species incorporated within zeolites

V-silicalite catalysts (VS-1 and VS-2) prepared by hydrothermal synthesis have been studied by ESR, XAFS (XANES and EXAFS) and photoluminescence spectroscopy. The in situ characterization of these V-silicalites shows that vanadium is present within the zeolitic framework as a highly dispersed tetrahedrally coordinated V-oxides, VO₄ unit, having a short V=O bond length. Photoluminescence spectroscopy in static and dynamic mode, as well as XAFS studies allow to detect in the V-silicalites different V species than that present in V-HMS or V/SiO₂, in terms of V=O bond length, vibrational energy, bond angle and lifetime of the excited triplet state. It is suggested that the combined contribution of the neighboring Si---OH group attached to the VO₄ unit and the zeolitic rigid framework structure of V-silicalites cause a more significant and pronounced effect on the chemical properties of the VO₄ unit than the flexible structure of V-HMS or V/SiO₂. Moreover, the dynamic quenching of the phosphorescence by the addition of reactant molecules such as NO or propane indicates that the V species in the excited triplet state can be expected to be the active sites for the photocatalytic reactions.     

Diffusion process of amino acids in polymer supports for solid‐phase peptide synthesis as studied by pulsed‐field‐gradient spin‐echo proton nuclear magnetic resonance

The diffusion coefficient (D) values of tert‐butyloxycarbonyl‐glycine, tert‐butyloxycarbonyl‐L ‐tryptophan, tert‐butyloxycarbonyl‐L ‐phenylalanine (Boc‐Phe), and 9‐fluorenylmethoxycarbonyl‐L ‐phenylalanine in Merrifield polystyrene (MPS) gels, poly(ethylene glycol)‐grafted polystyrene (PEG–PS) gels, and crosslinked ethoxylate acrylate (CLEAR) gels, as used in solid‐phase peptide synthesis, were determined by the pulsed‐field‐gradient spin‐echo ¹H‐NMR method. From these experimental results, it was found that the amino acids in MPS gels, PEG–PS gels, and CLEAR gels with N,N‐dimethylformamide‐d₇ (DMF‐d₇) as a solvent had multidiffusion components within a measurement timescale of 10 ms. The D value of Boc‐Phe in polystyrene gels (1% divinylbenzene crosslinked) with tetrahydrofuran‐d₈ was much larger than that in the same gels with DMF‐d₇. Furthermore, the required time in which an amino acid transferred from a reactive site to a reactive site was estimated, within which the solvents and amino acids in the polymer supports diffused in the swollen beads.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 413–421, 2003