Ultra-sensitive high-speed density measurement of the “piston effect” in a critical fluid

In order to conduct a detailed investigation of the piston effect, the peculiar heat transportation phenomenon in critical fluids, an ultra-sensitive high-speed density measurement system was developed using a very thin heater, a sensitive interferometer and a large-capacity high-speed data acquisition system. As the first step of the investigation, an experiment was conducted to measure the velocity of sound in CO2 near its critical point. Short heat pulses suppressing the disturbance of natural convection were applied to a small cell filled with almost-critical CO2 fluid and were detected by the measurement system. Because the pulses propagated through the cell at the velocity of sound and were reflected several times between the cell walls, the velocity could be precisely determined by measuring the time intervals between successive reflections. The resulting velocity profile versus temperature showed good agreement with theoretical prediction and numerical simulations. This result validated the density measurement system, and it is considered that the measurement system will be a very effective tool for further studies on critical phenomena with the aid of numerical simulation.     

Improving the dependability of network management systems

As computer networks expand, there is a pressing need for management systems capable of handling errors. This article proposes an approach based on management proxies to improve the dependability of fault management systems. An effective MIB to implement the proxies is presented, which allows their deployment at virtually no cost. As an example, a case study of a WAN is carried out. © 1998 John Wiley & Sons, Ltd.     

Development of low-energy methods for preparing food Nano-emulsions

The aim of this work was to investigate the effect of sucrose on the phase behavior of vegetable oil/polyoxyethylene sorbitan monooleate (MOPS, Tween 80) and decaglycerol monolaurilester (DGML)/aqueous solution systems to establish low-energy emulsification methods for preparing nano-emulsions suitable for food uses. Phase diagrams were constructed to elucidate the optimal process for preparing the nano-emulsions. It was found that nano-emulsions were obtained when the composition was altered to either cross the sponge phase (L(3)) or lamellar phase (La) in the vegetable oil/MOPS/aqueous solution system or vegetable oil/DGML/aqueous solution system, respectively. The average droplet sizes in the former and latter emulsions were 0.203 μm and 0.165 μm, respectively. The addition of sucrose changed the hexagonal phase in the vegetable oil/MOPS/aqueous solution system into the sponge phase. As a result, the sponge region in the vegetable oil/MOPS/sucrose aqueous solution system occupied a larger area than that in the vegetable oil/MOPS/water system. In contrast, sucrose had no effect on the area of the La region in the vegetable oil/DGML/aqueous solution system. However, the addition of sucrose decreased the amount of emulsifier required to prepare nano-emulsions in both the vegetable oil/MOPS and DGML/aqueous solution systems. Sucrose was confirmed to facilitate the preparation of nano-emulsions in both systems.     

Radiation-associated lung cancer: a comparison of the histology of lung cancers in uranium miners and survivors of the atomic bombings of Hiroshima and Nagasaki

A binational panel of Japanese and American pulmonary pathologists reviewed tissue slides of lung cancer cases diagnosed among Japanese A-bomb survivors and American uranium miners and classified the cases according to histological subtype. Blind reviews were completed on slides from 92 uranium miners and 108 A-bomb survivors, without knowledge of population, sex, age, smoking history, or level of radiation exposure. Consensus diagnoses were obtained with respect to principal subtype, including squamous-cell cancer, small-cell cancer, adenocarcinoma, and less frequent subtypes. The results were analyzed in terms of population, radiation dose, and smoking history. As expected, the proportion of squamous-cell cancer was positively related to smoking history in both populations. The relative frequencies of small-cell cancer and adenocarcinoma were very different in the two populations, but this difference was accounted for adequately by differences in radiation dose or, more specifically, dose-based relative risk estimates based on published data. Radiation-induced cancers appeared more likely to be of the small-cell subtype, and less likely to be adenocarcinomas, in both populations. The data appeared to require no additional explanation in terms of radiation quality (alpha particles vs gamma rays), uniform or local irradiation, inhaled vs external radiation source, or other population difference.     

A soft-error-immune 0.9-ns 1.15-Mb ECL-CMOS SRAM with 30-ps 120 klogic gates and on-chip test circuitry

A soft-error-immune, 0.9-ns address access time, 2.0-ns read/write cycle time, 1.15-Mb emitter coupled logic (ECL)-CMOS SRAM with 30-ps 120 k ECL and CMOS logic gates has been developed using 0.3-μm BiCMOS technology. Four key developments ensuring good testability, reliability, and stability are on-chip test circuitry for precise measurement of access time and for multibit parallel testing, a memory-cell test technique for an ECL-CMOS SRAM, a highly stable current source with a simple design using a current mirror, and a soft-error-immune memory cell using a silicon-on-insulator (SOI) wafer. These techniques will be especially useful for making the ultrahigh-speed, high-density SRAM's used as cache and control storages in mainframe computers     

Characteristics of superconducting generator at high response excitation

Superconducting generators have many advantages, one of which is their ability to improve the stability of power systems because of their low synchronous impedances. The advantage may be increased by adoption of high-response excitation. The first 100 kVA high-response excitation superconducting generator has now been built. One of the problems in the design of such generators involves the characteristics of the field circuit, i.e., the field armature winding, losses in the component materials, and loss in the superconducting field winding. In this paper, a 2-dimensional electromagnetic field analysis of field circuit characteristics is presented.     

Retinal degeneration induced by N-methyl-N-nitrosourea in Syrian golden hamsters

BACKGROUND: The sequential retinal changes in Syrian golden hamsters induced by N-methyl-N-nitrosourea (MNU) have not been studied. METHODS: Female hamsters received a single intraperitoneal injection of 90 mg/kg MNU at 50 days of age, and the retina was examined light and electron microscopically, immunohistochemically and by the TdT-mediated dUTP-digoxigenin nick end labeling (TUNEL) method until 20 weeks after the treatment. RESULTS: The retinal changes were as follows: (1) Photoreceptor apoptosis occurred 1 day after the treatment and resulted in photoreceptor loss at day 7. During the degeneration, Müller cell proliferation was conspicuous at day 5. (2) After the photoreceptor cell loss, migration of the pigment epithelial cells in all layers of the retina which were in contact with blood vessels occurred. Due to the Müller cell proliferation, gliosis was prominent at the later stage. CONCLUSIONS: The MNU injection caused photoreceptor apoptosis followed by pigment epithelial cell migration around the blood vessels, accompanied by gliosis. The primary event and the course of this disease closely resemble those of retinitis pigmentosa in humans.     

Studies on elastic hydrogel membrane. I. Effect of preparation conditions on the membrane performance

The properties and the permeation characteristics of poly(vinyl alcohol) hydrogel membranes were investigated. The membranes have excellent elasticity and showed reversible compaction by operating pressure. The membrane performance was also changed reversibly by pressure, and was held stable at ambient temperature for more than 12 months. The hydrogel membrane was stable against temperature up to 40°C, and was melted down at 70°C. Rejection increased with operating pressure. In the case of 1% (w/w) aqueous solution of poly(ethylene glycol) whose degree of polymerization is 400, the rejection increased from 30 to 85% by changing operating pressure from 5 kg/cm² to 60 kg/cm². These results suggested the possibility for the pressure controlled fractionation of molecular weight.     

A Precomputed Approach for Real-Time Haptic Interaction with Fluids

The key to enhancing perception of the virtual world is improving mechanisms for interacting with that world. Through providing a sense of touch, haptic rendering is one such mechanism. Many methods efficiently display force between rigid objects, but to achieve a truly realistic virtual environment, haptic interaction with fluids is also essential. In the field of computational fluid dynamics, researchers have developed methods to numerically estimate the resistance due to fluids by solving complex partial differential equations, called the Navier-Stokes equations. However, their estimation techniques, although numerically accurate, are prohibitively time-consuming. This becomes a serious problem for haptic rendering, which requires a high frame rate. To address this issue, we developed a method for rapidly estimating and displaying forces acting on a rigid virtual object due to water. In this article, we provide an overview of our method together with its implementation and two applications: a lure-fishing simulator and a virtual canoe simulator