Commercialized fast reactor cycle systems and reactor core performance of the promising fast reactors

The Feasibility Study on Commercialized Fast Reactor (FR) Cycle Systems is under progress in order to propose prominent FR cycle systems that will respond to the diverse needs of society in the future. The design studies on various FR system concepts have been achieved and then the evaluations of potential to achieve the development targets have been also carried out. Crucial development issues have been found out for each FR system concept and their development plans for the key technologies are summarized as the roadmap. As a result, it has been confirmed that the sodium-cooled FR concept is highly suited to the development targets and R&D issues are related enhancing the economy with certain perspectives for realization. A flexible and robust development program for the FR cycle system will be proposed taking account of the characteristics for each FR concept until the end of the Phase II study.     

An energetic approach to the analysis of anisotropic hyperelastic materials

We demonstrate that for the class of anisotropic hyperelastic materials with stiffening behaviour (i.e., the stiffness increases for increasing strain), it is possible to find an approximation by means of the linear superposition of an anisotropic quadratic potential, generated by the true linear elasticity tensor of the target material, and a suitable correction potential that is isotropic and hyperelastic. The proposed method can be implemented into commercially available Finite Element software by use of featured options only. This approach is intended to provide the solution to a stress-strain problem, based entirely on energetic considerations, which ensures the convexity of the potentials, and provides a simple material characterisation procedure.     

Transient and steady state crack growth kinetics for stress corrosion cracking of a cold worked 316L stainless steel in oxygenated pure water at different temperatures

The stress corrosion cracking (SCC) growth kinetics for a cold worked 316L stainless steel was continuously monitored in high purity water at different temperatures and dissolved oxygen (DO) levels under a K (or K_max) of 30 MPa m^0.5. The total SCC test time was more than 8000 h to make sure the steady state crack growth rate under each test condition could be reached. Crack growth rate (CGR) increases with increasing temperature in the range 110-288 °C. A typical intergranular-cracking mode is identified. Depending on the previous test condition, especially the temperature, three kinds of crack growth kinetics, i.e., increasing with testing time then becoming steady, being constant during the whole period, or decreasing with test time then becoming steady, are identified and discussed. Time-dependent and testing history-dependent crack growth modes were confirmed in two series of tests in 2 ppm DO and 7.5 ppm DO pure water. The apparent activation energies are calculated and compared with other data in different environments under different applied loading levels for understanding the cracking mechanism.     

60 GHz band 64 QAM/OFDM terrestrial digital broadcasting signaltransmission by using millimeter-wave self-heterodyne system

This paper describes the first time experimental studies on 60-GHz band transmissions of terrestrial digital broadcasting signals (ISDB-T) with 64-QAM modulations on coded orthogonal frequency division multiplexing (COFDM) format. It has been a very difficult experiment to accomplish because it requires very stable and low phase-noise oscillators in the millimeter-wave band. The use of our proposed millimeter-wave self-heterodyne system, overcame this problem without using a stable oscillator, and provided a bit error rate (BER) of less than 10^-6 without any forward error correction. We also discuss the relationship between the carrier-to-noise power ratio and the BER obtained, and demonstrate that the penalty of the required CNR for our experimental system is less than 1 dB compared to the results of a back-to-back BER test     

Microscopical studies of the tissue structure of konjac tubers

The tissue structures of 2-year-old konjac tubers were investigated using a variable pressure scanning electron microscope equipped with an energy-dispersive X-ray spectrometer and an optical microscope. Konjac mannan (KM) cells are distributed all over the tuber and the spaces between the KM cells are filled with parenchyma. The KM cells are covered with scale-like cell walls and the size of the cells varies from 160 to 650 μm. Other kinds of particles with different sizes are observed in the honeycombed cells around the KM cells. The small grains relate to protein granules and the spherical particles (~12 μm in diameter), which are composed of small granules (1–3 μm in diameter), are starch. The tuber also contains potassium and calcium in the parenchyma. Most calcium is found in the needle-like crystals in the form of calcium oxalate. Such crystals are also found in 1 year and seed tubers.     

Purification and some properties of cholesterol oxidase stable in detergents from gamma-proteobacterium Y-134

Cholesterol oxidase (CHO) with high stability in detergents was found from an isolated strain, Y-134, belonging to the gamma-subclass of Proteobacteria. CHO production reached its maximum by incubation at 30 degrees C for 12 d. It was purified from cell-free extract prepared by mixing the cells with 0.4% Triton X-100. The absorption spectrum of the purified enzyme exhibited maxima at 274 and 410 nm, and a shoulder at 330 nm. The molecular mass was 115 kDa with two identical subunits of 58 kDa. The enzyme oxidized cholest-5-en-3beta-ol (cholesterol) and 5alpha-cholestan-3beta-ol (dihydrocholesterol) at a high reaction rate, and the K(m) value for cholesterol was 65 microM. The stability of the enzyme was higher than other CHOs in nonionic detergents with high values of hydrophilelipophile balance (HLB) such as Triton X-450 and sodium cholate. NH2-terminal sequence analysis showed a high similarity to CHO from Burkholderia cepacia, but not to CHOs from Streptomyces or Brevibacterium.     

Possible debonding mode of coated film under thermal loading

Deformation modes in thin films are discussed in order to evaluate the possible debonding mechanism. A combined simulation technique is employed in order to evaluate the thermo-mechanical response of a thin film layer attached to a substrate. A thermo-elasto-plastic finite element analysis is carried out on a jointed system, while only the film layer is picked up and both the deformation and eigen-mode analyses are implemented with reference to the data obtained in the former analysis. This approach enables us to capture the mechanical stiffness of the thin film layer. The effects of crystal morphology of substrate are discussed in terms of the interfacial force and the out-of-plane deformation of the thin film.     

Video based estimation of pedestrian walking direction for pedestrian protection system

Pedestrian protection has played an important role for driver assistance systems. Our aim is to develop a video based driver assistance system for the detection of the potentially dangerous situation between the vehicle and pedestrian, in order to warn the driver. In this paper, we address the problem of detecting pedestrian in real-world scenes and estimation of the walking direction with a single camera from a moving vehicle. Considering all the available cues for predicting the possibility of collision is very important. The direction in which the pedestrian is facing is one of the most important cues predicting where the pedestrian may move in the future. So we first address the problem of single-frame pedestrian orientation estimation in real-world scenes. Then again, we estimate the pedestrian walking direction using multi-frame based on the result of single-frame orientation estimation. We propose a three-step method: pedestrian detection for single-frame step, orientation estimation for single-frame step and walking direction estimation for multi-frame step. To evaluate the proposed method in its robustness and accuracy, the experiments have been performed between numbers of images which is highly challenging uncontrolled conditions in real world. It shows a significant performance improvement in octant orientation estimation of about 64% accuracy in the orientation estimation step and achieved surprisingly good accuracy in estimating the walking direction against 212 targeted objects.     

Pb-free surface-finishing on electronic components’ terminals for Pb-free soldering assembly

Pb-free solderable surface finishing is essential to implement Pb-free solder assembly in order to meet with the growing demand of environmental consciousness to eliminate Pb from electronic products. Two types of widely applicable Pb-free surface finishing technologies are developed. One is the multilayer-system including Pd with Ni undercoat. Heat-resistance of Pd enables whole-surface-plating on to leadframe before IC-assembling process. The other is the double-layer-system with low-melting-point-materials, for example, thicker Sn underlayer and thinner Sn-Bi alloy overlayer, dilutes Sn-Bi alloy’s defects of harmful reactivity along with substrate metal and mechanical brittleness with keeping its advantages of solder-wettability and no whisker.     

Deep-sea water supplementation and swimming exercise improves bone metabolism in growing rats fed a high-fat diet

This study was examined the effects of deepsea water (DSW) supplementation and swimming exercise on bone metabolism in growing male rats. Thirty-two Sprague-Dawley male rats, 6 weeks of age, were randomly divided into high-fat diet sedentary (HS, n=8) or exercised group (HE, n=8) and DSW supplemented sedentary (DS, n=8) or exercised group (DE, n=8), given a high fat diet to all groups for 8 weeks. In the results, serum osteocalcin level of the DS was significantly lower than that of the HS (p<0.01). In addition, femoral bone mineral density (BMD), tibial bone mineral content (BMC), and breaking force of the DS were significantly higher than that of the HS (p<0.05). Furthermore, femoral BMD and tibial weight of DE were significantly higher than that of the HE (p<0.05). These results suggest that drinking deep-sea water and exercise has a crucial role for prevent osteoporosis and increase peak bone mass in growing male rats.