输电线路直击雷特性仿真计算

以35 kV输电线路为主要研究对象,建立其输电线路雷击仿真模型,分别从避雷线、档距、接地电阻和避雷器等因素进行深入研究,分析输电线路遭受雷击的影响.     

环境空气质量标准指引家居场景空气质量标准制定

我国的空气质量标准采用了发达国家和地区在环境空气质量标准制修订方面等的丰富经验,世界卫生组织(WHO)从保护人群健康出发,根据现有科研资料提出的标准和判断,从人的健康角度考虑,也作为标准依据的参考,在2021年对空气污染物浓度限值进行了调整,做了最新的跟踪比较.综述空气污染物对健康的影响,介绍WHO环境空气质量准则,从标准的历史沿袭、标准分级、控制污染物种类、标准限值四个部分对各国空气质量标准进行比较,得到污染物控制的理论基础和数值依据,并借鉴GB/T 18883《室内空气质量标准》,对我国家居场景室内空气质量标准的制定提供参考.     

超导故障限流器抑制短路电流直流分量的仿真分析

短路电流中的周期分量和直流分量对系统短路容量都有贡献,而后者在工程应用中没有引起足够的重视.目前我国宁夏、上海、广州等电网普遍面临短路电流直流分量超标,系统保护装置难以可靠清除故障的状况,严重威胁电力系统的安全可靠性.基于此,本文提出使用超导故障限流器在限制短路电流幅值的同时,抑制短路电流直流分量的方法,缓解断路器的开断负担.目前超导限流器对短路电流直流分量的抑制效果及在高直流分量系统超导限流器的设计方法尚不清楚.因此,搭建了超导故障限流器模型,以330 kV系统为例,研究了不同直流分量时间常数下超导限流器阻值与直流分量的关系,提出了超导故障限流器失超阻值的优化设计方法.结果表明在不同的短路故障条件下,超导限流器对直流分量的抑制效果均非常明显,能有效提高系统的可靠性.     

基于生态径流指标的水文情势变化评估新方法

基于流量历时曲线计算生态径流指标的方法存在诸多不足,也未形成相应的河流水文情势变化评估方法。采用流量过程线重新定义了月、季和年三种时间尺度的生态径流,构建了包含12个月生态盈余和12个月生态赤字的生态径流指标体系,提出了衡量这些指标在建库前后变化度的计算公式,基于月生态赤字发展了月生态风险评估方法,形成了一种河流生态水文情势变化评估方法。将其用于长江宜昌站,评估三峡工程在建库前后的生态水文情势变化。结果表明：重新定义的月、季、年生态径流之间消除了不一致性,香农多样性指数与年生态赤字的年际变化具有更高的相似度,变化度计算公式完全适用于衡量建库前后的变化程度,生态风险图使生态径流指标的实用性大为增强。     

A “Three-in-One” Multifunctional Probe for Bcl-2/Mcl-1 Profiling and Visualizing in Situ

Bcl-2 and Mcl-1, the two arms of the anti-apoptotic Bcl-2 family proteins, have been identified as key regulators of apoptosis and effective therapeutic targets of cancer. However, no small-molecular probe is capable of profiling and visualizing both Bcl-2 and Mcl-1 simultaneously in situ. Herein, we report a multifunctional molecular probe (BnN₃-OPD-Alk) by a “three-in-one” molecular designing strategy, which integrated the Bcl-2/Mcl-1 binding ligand, fluorescent reporter group and photoreactive group azido into the same scaffold. BnN₃-OPD-Alk exhibited sub-micromolar affinities to Bcl-2/Mcl-1 and bright green self-fluorescence. It was then successfully applied for Bcl-2/Mcl-1 labeling, capturing, enriching, and bioimaging both in vitro and in cells. This strategy could facilitate the precise early diagnosis and effective therapy of dual Bcl-2/Mcl-1-related diseases.     

深冷处理与工模具的耐磨性

热处理后的金属材料再经低落曙处理，其力学能明显提高，尤其是高碳高合金工模具钢的耐磨性提高特别显著。本文着重研究了应用面较广的Ｗ６Ｍｏ５Ｃｒ４Ｖ２钢的处理工艺制度，组织性能及其磨损机理。     

Unique Dielectric Behavior of 0.6Pb(Ni1/2W1/2)O3·0.4PbTiO3 Derived from Mechanical Activation

0.6Pb(Ni_1/2W_1/2)O₃·0.4PbTiO₃(0.6PNW·0.4PT) of complex perovskite structure is successfully synthesized by mechanical activation of mixed oxide composition, followed by sintering at 950°C. It exhibits a considerably stable temperature dependence of dielectric constant over the wide temperature range of −120° to 20°C, although there occurs a dielectric peak at around 74°C. Raman spectroscopic studies show the coexistence of tetragonal and pseudocubic perovskite phases on sintering at 950°C, which are attributed to the inhomogeneous distribution of PbTiO₃ arising from mechanical activation. The dielectric behavior can be fine tuned by thermal annealing at 750°C, leading to phase redistribution in PNW-PT.     

Synthesis,characterization, and thermal properties of phosphorus‐containing,wholly aromatic thermotropic copolyesters

A series of phosphorus‐containing, wholly aromatic thermotropic copolyesters from acetylated 2‐(6‐oxide‐6H‐dibenz〈c,e〉〈1,2〉oxa phosphorin‐6‐yl)‐1,4‐dihydroxy phenylene, p‐acetoxybenzoic acid, terephthalic acid, and isophthalic acid were prepared by melting polycondensation. The structure and basic properties of the polymers, such as the glass‐transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity, were investigated with Fourier transform infrared, elemental analysis, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray diffraction, and hot‐stage polarizing optical microscopy. The copolyesters had relatively high T_g values ranging from 183 to 192°C. The T_m values obtained from DSC curves for samples P‐20 and P‐25 were 290 and 287°C, respectively (where the number in the sample name indicates the molar fraction of the phosphorus‐containing monomer in the reactants). The initial flow temperatures of other samples observed with hot‐stage polarizing microscopy were 271–290°C. The 5% degradation temperatures in nitrogen ranged from 431 to 462°C, and the char yields at 640°C were 41–52%. All the copolyesters, except P‐40, were thermotropic and nematic. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1278–1284, 2002     

Interaction‐Feature Enhanced Multiuser Model Learning for a Home Environment Using Ambient Sensors

Activity recognition (AR) is a key enabler for a context‐aware smart home since knowing what the residents’ current activities helps a smart home provide more desirable services. This is why AR is often used in assistive technologies for cognitively impaired people to evaluate their abilities to undertake activities of daily living. In a real‐life scenario, multiple‐resident AR has been considered as a very challenging problem, primarily due to the complexity of data association. In addition, most prior research has not considered the potential interpersonal interactions among residents to simplify complexity, especially in an environment monitored by ambient sensors. In this study, we propose two types of multiuser activity models, both of which are derived from an interaction‐feature enhanced multiuser model learning framework. These two models consider interpersonal interactions and data association for multiuser AR using ambient sensors. We then compare their performance with the other two baseline models with or without consideration of data association and interpersonal interactions. The experimental results show that the derived models outperform other baseline classifiers. Therefore, the proposed approach can increase the opportunities for providing context‐aware services for a multiresident smart home.     

Synthesis and characterization of poly(ϵ‐caprolactone)‐b‐poly(ethylene glycol) block copolymers prepared by a salicylaldimine‐aluminum complex

A series of poly(?‐caprolactone)‐b‐poly(ethylene glycol) (PCL‐b‐PEG) block copolymers with different molecular weights were synthesized with a salicylaldimine‐aluminum complex in the presence of monomethoxy poly(ethylene glycol). The block copolymers were characterized by ¹H NMR, GPC, WAXD, and DSC. The ¹H NMR and GPC results verify the block structure and narrow molecular weight distribution of the block copolymers. WAXD and DSC results show that crystallization behavior of the block copolymers varies with the composition. When the PCL block is extremely short, only the PEG block is crystallizable. With further increase in the length of the PCL block, both blocks can crystallize. The PCL crystallizes prior to the PEG block and has a stronger suppression effect on crystallization of the PEG block, while the PEG block only exerts a relatively weak adverse effect on crystallization of the PCL block. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007