太空生长掺Te—GaAs单晶的结构缺陷观测

本文用X射线、电子显微镜和电子束阴极荧光方法,对在太空中生长的掺Te-GaAs单晶材料的结构完整性进行了实验研究.在地面生长的掺Te-GaAs有明显的杂质条纹,而在太空生长的晶体杂质条纹消失;在太空和地面生长的交界处于空间材料一侧的中心部位,存在一个大约5μm宽的高完整区.远离中心部位,空间材料的完整性降低,出现了大量位错并伴有微缺陷.实验结果表明:在微重力条件下生长化合物半导体GaAs对在其中的杂质均匀分布有利.在太生长时出现的大量位错和微缺陷,并不是在生长时由于失重所致,而是在太空生长时温度失控所引起的.     

Determination of optimum hazelnut roasting conditions

The objective of this study was to test the hypothesis that the roasting conditions used for hazelnuts, such as the air temperature, air velocity and roasting time (independent variables), could be optimized by using Response Surface Methodology. Effects of independent variables on sensory and physical characteristics were determined. A consumer test was used to determine the acceptable samples. Very dark and very light roasted samples, corresponding to 165 °C, 3 m/s, 25 min and 125 °C, 1 m/s, 15 min process conditions, respectively, were unacceptable. Superimposed contour plots were used to determine the values of independent variables and these showed the process conditions where all product characteristics were acceptable to consumers. At low velocity (0.3 m/s), acceptable products were produced at about 165–179 °C for 20–25 min. When air velocity increased, air temperature shifted to lower temperatures. Samples roasted at 145 °C, 2 m/s, 28 min, 165 °C, 1 m/s, 25 min and 145 °C, 3.7 m/s, 20 min produced the most acceptable products. The sample roasted at 165 °C, 1 m/s, 25 min required the least air velocity and was the most economical in terms of energy consumed among the samples rated most acceptable by consumers.     

Cell‐loss control in multiplexing of VBR video over ATM networks

In this article we investigate the impacts of interspacing and source polling policies on the cell‐loss rates in transmission of variable bit rate video sources over Asynchronous Transfer Mode networks. We present a mathematical model that finds the approximate optimal starting times of the video sources that minimize the congestion at the multiplexer. Combined with the approximate optimal source starting times, we propose a source ordering and polling policy for reducing the cell‐loss rates. The proposed policy is tested against alternative policies using simulation of pre‐recorded video data. This revised version was published online in June 2006 with corrections to the Cover Date.     

Influence of compiler optimizations on system power

Optimizing for energy constraints is of critical importance due to the proliferation of battery-operated embedded devices. Thus, it is important to explore both hardware and software solutions for optimizing energy. The focus of high-level compiler optimizations has traditionally been on improving performance. In this paper, we present an experimental evaluation of several state-of-the-art high-level compiler optimizations on energy consumption, considering both the processor core (datapath) and memory system. This is in contrast to many of the previous works that have considered them in isolation     

The effect of rock weathering and transition zones on the performance of an EPB-TBM in complex geology near Istanbul,Turkey

Bulletin of Engineering Geology and the Environment - The new Istanbul Airport is being constructed over an old coal field area, 35 km away from the city center. The construction of a rail link...     

Thread vulnerability in parallel applications

Continuously reducing transistor sizes and aggressive low power operating modes employed by modern architectures tend to increase transient error rates. Concurrently, multicore machines are dominating the architectural spectrum today in various application domains. These two trends require a fresh look at resiliency of multithreaded applications against transient errors from a software perspective. In this paper, we propose and evaluate a new metric called the Thread Vulnerability Factor (TVF$TVF$). A distinguishing characteristic of TVF$TVF$ is that its calculation for a given thread (which is typically one of the threads of a multithreaded application) does not depend on its code alone, but also on the codes of the threads that share resources and data with that thread. As a result, we decompose TVF$TVF$ of a thread into two complementary parts: local and remote. While the former captures the TVF$TVF$ induced by the code of the target thread, the latter represents the vulnerability impact of the threads that interact with the target thread. We quantify the local and remote TVF$TVF$ values for three architectural components (register file, ALUs, and caches) using a set of ten multithreaded applications from the Parsec and Splash-2 benchmark suites. Our experimental evaluation shows that TVF$TVF$ values tend to increase as the number of cores increases, which means the system becomes more vulnerable as the core count rises. We further discuss how TVF$TVF$ metric can be employed to explore performance–reliability tradeoffs in multicores. Reliability-based analysis of compiler optimizations and redundancy-based fault tolerance are also mentioned as potential usages of our TVF$TVF$ metric.     

The role of microcrystalline structure on optical scattering characteristics of semi-crystalline thermoplastics and the accuracy of numerical input for IR-heating modeling

Infrared (IR) heating is widely used for thermoforming of thermoplastic polymers. The key benefit of radiation heating is that a significant amount of the radiative energy penetrates into the polymers thanks to their semi-transparency. For the case of heating unfilled semi-crystalline polymers, the relation between their microcrystalline structure and optical properties is the key to develop a predictive IR-heating model as microcrystalline structure introduces an optically heterogeneous medium. In this study, a relation between the microcrystalline structure of a polyethylene (PE) and its effect on the thermo-optical properties was experimentally analyzed considering a two-step analysis. At very first step, the relation was analyzed considering samples with identical thicknesses and different morphologies, characterized here in terms of degree of crystallinity (X_c (%)). Using Fourier Transform Infrared (FT-IR) spectroscopy and integrating sphere, optical characteristics of the PE samples were analyzed in near-infrared (NIR) and middle-infrared (MIR) spectral ranges. The analyses showed that a slight variation in X_c (%) has a great effect on the optical characteristics of PE, particularly the transmission characteristics in NIR range. The wavelength-dependent effect of X_c (%) on the transmission behaviors opened a discussion about the fact that the microcrystalline structures -in particular spherulites or their substructures such as lamellae- are responsible for optical scattering. Using the optical properties obtained from the two-step experimental analyses, two different thermo-optical properties were calculated, namely extinction and absorption coefficients, and used as a numerical input for the parametric numerical studies. The numerical studies were performed using an in-house developed radiation heat transfer algorithm -RAYHEAT-. Both the experimental and numerical analyses demonstrated the importance of the optical scattering regarding the identification of thermo-optical properties, used as a numerical input for radiation heat transfer models.     

铝-钛异种金属钎焊技术的研究

介绍了铝-钛合金复合结构的优点和应用前景,分析了铝-钛异种金属之间焊接的难点及存在的主要问题,总结了关于铝-钛异种金属真空钎焊、高频感应钎焊、熔钎焊以及搅拌摩擦钎焊技术的研究现状,并讨论了各种焊接技术的主要特征。     

Adsorption of 4-chlorophenol from aqueous solutions by xad-4 resin: isotherm, kinetic, and thermodynamic analysis

Removal of 4-chlorophenol (4-CP) from synthetic aqueous solutions through adsorption on Amberlite XAD-4 resin, a non-ionic macroreticular resins, under batch equilibrium experimental conditions at 298, 308 and 318K was investigated. It is necessary to propose a suitable model to a better understanding on the mechanism of 4-CP adsorption. For this purpose, Langmiur, Freundlich, Toth, and Redlich-Peterson (RP) isotherm models were compared. The two and three parameters in the adopted adsorption isotherm models were determined by the help of MATLAB package program. It was determined that best fitted adsorption isotherm models were obtained to be in the order: Redlich-Peterson>Langmuir>Toth>Freundlich isotherms. The pseudo-second-order kinetic model provided the best correlation to the experimental results. Results of the intra-particle diffusion model show that the pore diffusion is not the only rate limiting step. The lower correlation of the data to the Bangham's equation also represents that the diffusion of the adsorbate into pores of the sorbent is not the only rate-controlling step. The thermodynamic constants of adsorption phenomena; DeltaG degrees, DeltaH degrees, and DeltaS degrees were found as -4.17 (at 298K) kJ/mol, -42.01 kJ/mol, and -0.127 kJ/(mol K), respectively. The results showed that adsorption of 4-CP on Amberlite XAD-4, a nonionic polymeric resin was exothermic and spontaneous.