An intelligent sensor for detection of milling chatter

In this paper, a new real-time sensor system has been developed to detect chatter in milling operations. In the developed sensor system, a pattern recognition technique based on an unsupervised neural network using the adaptive resonance theory (ART) is adopted for detection of milling chatter. The features on the cutting force spectrum are fed into the sensor system to classify the milling process with or without chatter. The experimental results indicate that the proposed sensor system can accurately detect milling chatter regardless of the variation in cutting conditions.     

LOW-CYCLE FATIGUE UNDER NON-PROPORTIONAL LOADING

A series of strain-controlled, low-cycle fatigue experiments have been conducted on 42CrMo steel under various loading paths including circular, square, cruciform, and rectangular paths. Present experiments have shown that there is additional hardening under non-proportional cyclic loading. Non-proportional cyclic additional hardening also results in a shorter life for multiaxial low cycle fatigue. A non-proportionality measure of strain path based on both a physical basis and macromechanical phenomena is proposed. The loading path effect on additional hardening is also described well. Low-cycle fatigue damage accumulation and the evolution process under non-proportional loading is analysed via the Continuum Damage Mechanics Model of Chaboche. A non-proportinality measure is introduced in the damage evolution equation and a modified Coffin-Manson type formula is derived. A novel fatigue life prediction approach based on the critical-plane concept of Brown and Miller is proposed.     

ZSM-5型沸石催化剂的结焦与失活

本文对ZSM-5型沸石催化剂结焦与失活的关系进行了系统的评述.探讨了ZSM-5沸石的酸度和微孔结构对结焦过程的影响.     

ID-based non-interactive zero-knowledge proof system based on one-out-of-two non-interactive oblivious transfer

In this paper, we propose an ID-based non-interactive zero-knowledge proof system based on the 1-out-of-2 noninteractive oblivious transfer protocol. This zero-knowledge proof system is secure against a newly discovered cheating attack.     

FD—TD在分析FSS中的应用

本文讨论了用FD TD分析FSS的有关问题,提出了一种适合于在任意入射角情况下分析FSS的有效吸收边界条件,分别以单层、双层FSS为例进行了计算.数值结果和矢量模式法、谱域法的结果非常一致.     

Evaluation of Soybean Seedcoat Cracking During Drying:PART II. Using MRI

MRI techniques were developed and employed for non-destructive and noninvasive study of seedcoat cracking in low moisture soybean kernels during heated air drying. Proton density image and transient moisture distribution profile of a single soybean kernel can be obtained using MRI. These MRI techniques proved to be particularly useful for the continuous observation of initiation and propagation of seedcoat cracking during the entire period of drying process without interruption.

The proton density images of soybean kernels showed that seedcoat cracking was initiated perpendicular to the long axis of the kernel near the hilum. The transient moisture distribution profiles in soybean kernels during drying indicate that moisture gradient developed during drying was higher in the seedcoat than in the cotyledon. Drying temperature and initial average moisture content were positively correlated with the soyhean seedcoat crackig. The location of the     

非线性地基上桩结构物空间分析

本文提出了桩结构物－非线性地基空间相互作用分析的迭代法和非线性有限元法。其中，桩基分析用ｐ－ｙ曲线法。结合实际结构物进行了大量的计算及比较分析，成果是令人满意的，可以付诸应用。     

组合式光纤流量传感器

提出了一种新型的组合式光纤流量传感器，介绍了它的工作原理，详细讨论了光脉冲转换器的设计要点，据此设计了传感头，并给出了它的实验结果。     

高灵敏度荧光显微镜及其在细胞光敏效应研究中的应用

研制了一种可探测极微弱细胞荧光图象的高灵敏度荧光显微镜，在仪器中使用了一个高质量的亮度增益为５０，０００的象增强器对细胞的荧光图象进行光能量放大，因而这种荧光显微镜可探测到普通荧光显微镜不能观察的微弱荧光图象。由于仪器中光源的输出强度很小，避免了长时间观察对活细胞的光损伤，并可观察到荧光效率低的荧光物质的分布图象。探测系统中用计算机采集图象数据，同时对数据进行必要处理，以提高图象的质量。这种高灵敏度的荧光显微镜可用于分析细胞中荧光物质的分布，以及细胞动态生理过程的研究。使用此仪器已直接观察到光敏竹红菌甲素在Ｈｅｌａ细胞（人体宫颈癌细胞）中的分布，细胞受光照射后的光损伤现象及加入三种细胞保护剂后获得不同程度保护的细胞状态。