Simulation of interconnect inductive impact in the presence of process variations in 90 nm and beyond

The on-chip inductive impact on signal integrity has been a problem for designs in deep-submicrometer technologies. The inductive impact increases the clock skew, max timing, and noise of bus signals. In this letter, circuit simulations using silicon-validated macromodels show that there is a significant inductive impact on the signal max timing (/spl sim/ 10% pushout versus RC delay) and noise (/spl sim/2/spl times/RC noise). In nanometer technologies, process variations have become a concern. Results show that device and interconnect process variations add /spl sim/ 3% to the RLC max-timing impact. However, their impact on the RLC signal noise is not appreciable. Finally, inductive impact in 65- and 45-nm technologies is investigated, which indicates that the inductance impact will not diminish as technology scales.     

Efficient distributed detection of conjunctions of local predicates

Global predicate detection is a fundamental problem in distributed systems and finds applications in many domains such as testing and debugging distributed programs. This paper presents an efficient distributed algorithm to detect conjunctive-form global predicates in distributed systems. The algorithm detects the first consistent global state that satisfies the predicate even if the predicate is unstable. Unlike previously proposed run-time predicate detection algorithms, our algorithm does not require the exchange of control messages during the normal computation. All the necessary information to detect predicates is piggybacked on computation messages of application programs. The algorithm is distributed because the predicate detection efforts as well as the necessary information are equally distributed among the processes. We prove the correctness of the algorithm and compare its performance with respect to message, storage and computational complexities with that of the previously proposed run-time predicate detection algorithms     

Augmented photoelectrochemical response of CdS/ZnS quantum dots sensitized hematite photoelectrode

A visible light active and stable photoelectrode has been developed by depositing a passivating layer of ZnS QDs on CdS QDs sensitized hematite photoelectrode (Hematite‐CdS/ZnS) for PEC generation of hydrogen. Photoelectrochemical properties, in terms of stability and efficiency, have been investigated on the various hematite photoelectrodes sensitized with CdS QDs and CdS/ZnS QDs by varying number of SILAR cycles. I–V characteristics show that two layers of ZnS QDs deposited over three layers of CdS could enhance PEC response of hematite and efficiency by a factor of 3 and 11 respectively. Chronoamperometry measurement ensures that after adding a layer of ZnS QDs, CdS sensitized hematite film turns out to be a stable photoelectrode in the electrolyte. Prepared photoelectrodes have been characterized by XRD, SEM, HRTEM and UV–Vis spectrophotometer for various structural, morphological and optical properties to analyze PEC results. Mott–Schottky analysis and incident photon to current conversion efficiency (IPCE) measurements of sensitized hematite photoelectrode supported the improved PEC response of CdS/ZnS QDs sensitized hematite thin films. Copyright © 2016 John Wiley & Sons, Ltd.     

Kinetic Modelling of Colour Degradation in Tomato Puree (Lycopersicon esculentum L.)

The kinetics of colour (measured as Hunter ‘a’ value) degradation in tomato puree (Lycopersicon esculentum L.) has been studied over a temperature range of 50–120 °C (isothermal condition), and also during normal open pan cooking, pressure cooking and cooking in a newly developed and patented fuel-efficient ‘EcoCooker’ (non-isothermal condition). The degradation of colour as measured by Hunter ‘a’ value was found to follow first order kinetics. The temperature dependence of degradation was adequately modelled by Arrhenius equation. A mathematical model has been developed using the isothermal parameters obtained to predict correctly the losses of red colour from the time–temperature data of non-isothermal heating/processing method. The results obtained indicate a colour degradation of similar magnitude in all the three modes of cooking used in the study.     

A Review: Tailor-made Hydrogel Structures (Classifications and Synthesis Parameters)

Hydrogels are being prepared for use in a wide variety of applications ranging from medicines, tissue engineering, superabsorbents, controlled release of drugs & fertilizers, and oil absorbers etc. This review highlights hydrogel structure and their different classifications under various heads. It also discusses various routes to obtain tailormade hydrogels by polymerizing a combination of two or more monomers with proper type of crosslinks in order to obtain desired properties in the resulting hydrogel. Novel hydrogel configurations like microgels and nanogels, slide ring gels, double network hydrogels and nanocomposite gels have also been reviewed.     

Effect of ferroelectric polarization on piezo/photocatalysis in Ag nanoparticles loaded 0.5(Ba0.7Ca0.3)TiO3–0.5Ba(Zr0.1Ti0.9)O3 composites towards the degradation of organic pollutants

A 0.5(Ba_0.7Ca_0.3)TiO₃–0.5Ba(Zr_0.1Ti_0.9)O₃ (BCT-BZT) ceramic was studied for photocatalysis and piezocatalysis effects using dye degradation (methylene blue, rhodamine B, and methyl orange) and bacterial (Escherichia coli) disinfection from aqueous solution. To examine the effect of ferroelectric polarization, BCT-BZT powder was poled using the corona poling technique. Same time, BCT-BZT was converted into Ag/BCT-BZT composites as Ag induced surface plasmon resonance effect during photocatalysis. Piezocatalysis performance was assessed for dyes mineralization under ultrasonication. There was a significant impact of silver nanoparticles on the photo/piezocatalysis performance of BCT-BZT. Similarly, electric poling has also played a positive role in improving the photo/piezocatalysis in view of various dye degradation. These samples also showed effective antibacterial performance.     

Effect of puffing on oil characteristics ofAmaranth (Rajgeera) seeds

Puffing or popping is a common method of processingAmaranthus cruentus (Syn.Amaranthus paniculatus L. or Rajgeera) grain. Investigations into the effect of this processing treatment have shown the percent unsaturation in the oil to decrease from 75.5% to 62.3%. The maximum effect is on linoleic acid, the quantity of which decreased sharply from 46.8% to 27.0%. Squalene also increased by 15.5%, due to puffing of amaranth seeds.     

Optimization of Aspergillus niger Fermentation for the Production of Glucose Oxidase

A number of nutritional factors influencing glucose oxidase (EC 1.1.3.4) production by Aspergillus niger NCIM 545 were studied. The synthesis of glucose oxidase by A. niger was investigated in two steps using submerged fermentation at 30 ± 2 °C and 180 rpm for 96 h. Primarily, nutritional components were selected by one-factor-at-a-time method, and the significance of each component with respect to glucose oxidase production was identified by Plackett–Burman design (seven variables including six nutritional viz. sucrose, sodium nitrate, peptone, calcium carbonate, magnesium sulfate, and potassium dihydrogen phosphate, and one dummy or unassigned variable were studied with eight experiments). In the second step, concentration of most significant factors and their interaction were studied with response surface methodology (central composite design). Each variable in the design was studied at five different levels, with all variables taken at a central coded value of zero. Considerable amount of glucose oxidase was produced from A. niger species with sucrose as the carbon source, sodium nitrate as the inorganic nitrogen source, and peptone as the organic nitrogen source. Glucose oxidase activity increased remarkably by 28.93 fold (from 0.00993 to 0.29 U ml⁻¹) with CaCO₃-supplemented media. The outcome of Plackett–Burman design showed CaCO₃, peptone, and MgSO₄ as significant parameters. Further optimization using a three-factor central composite design with 20 experiments increased yield of glucose oxidase from 0.29 to 2.05 U ml⁻¹ (sevenfold) with a decrease in cultivation time from 96 to 72 h.     

Green biomass active electronic diode

For the first time, a biomass electronic junction functioning as a conventional electronic diode inside green leaves of Vinka-rosa and Plumeria rubra mass structure has been experimentally predicted and studied. The experimental diode demonstrated appropriate conventional electronic diode characteristics. The predicted diode junctions were operated for forward and reverse dc voltage biases in the range of ±1 to 10 and 1 to 30?V respectively. The studies revealed a strong functional dependence on the water content of the green leaf. These studies are sequential to the very recently reported research work of Kosta et al. on bioelectronics and soilelectronics. The study speculatively forecasts the beginning of a new revolutionary era of green biomass electronic circuitry.