Spray pyrolytically deposited nanoporous Ti doped hematite thin films for efficient photoelectrochemical splitting of water

Nanoporous hematite (α-Fe₂O₃) thin films doped with Ti⁴⁺ deposited by spray-pyrolysis were successfully used in photoelectrochemical splitting of water for solar hydrogen production. X-ray diffraction, field emission scanning electron microscopy, UV–visible absorption and photoelectrochemical studies have been performed on the undoped and Ti⁴⁺ doped hematite thin films. Morphology of α-Fe₂O₃ thin films was observed to be nanoporous, with increased porosity (pore size ∼12 to 20 nm) on increasing doping concentration. A significant decrease in the bandgap energy from 1.95 to 1.27 eV was found due to doping. α-Fe₂O₃ film doped with 0.02 M Ti⁴⁺ ions exhibited best solar to hydrogen conversion efficiency (photoconversion efficiency) of 1.38% at 0.5 V/SCE. Highest photocurrent densities of 0.34 mA/cm² at zero bias and 1.98 mA/cm² at 0.5 V/SCE were obtained by incorporating 0.02 M Ti⁴⁺ in α-Fe₂O₃, which are significantly larger than earlier reported values. Donor density (30.8 × 10²⁰ cm⁻³) and flatband potential (−1.01 V/SCE) obtained were also maximum for this sample. Hydrogen collected in 1 hr at Pt electrode with the best photoelectrode was 2.44 mL with 150 mW/cm² visible light source.     

Multi-channel local ternary pattern for content-based image retrieval

Pattern Analysis and Applications - A feature based on a single modality such as color or texture is not sufficient to investigate the appearance variation across multiple images. In this paper, a...     

Recent trends in design and analysis of Rotman-type lens for multiple beamforming

Modified geometries for a Rotman-type bootlace lens have been proposed. The effects of design parameters on the shape of the lens and on the path length error have been investigated. The proposed geometries have been analyzed by the contour integral approach. Results obtained for the proposed lenses have been compared. © 1998 John Wiley & Sons, Inc. Int J RF and Microwave CAE 8: 321–338, 1998.     

Influence of Cobalt Doping on the Physical Properties of Zn<Subscript>0.9</Subscript>Cd<Subscript>0.1</Subscript>S Nanoparticles

Zn_0.9Cd_0.1S nanoparticles doped with 0.005–0.24 M cobalt have been prepared by co-precipitation technique in ice bath at 280 K. For the cobalt concentration >0.18 M, XRD pattern shows unidentified phases along with Zn_0.9Cd_0.1S sphalerite phase. For low cobalt concentration (≤0.05 M) particle size, d _XRD is ~3.5 nm, while for high cobalt concentration (>0.05 M) particle size decreases abruptly (~2 nm) as detected by XRD. However, TEM analysis shows the similar particle size (~3.5 nm) irrespective of the cobalt concentration. Local strain in the alloyed nanoparticles with cobalt concentration of 0.18 M increases ~46% in comparison to that of 0.05 M. Direct to indirect energy band-gap transition is obtained when cobalt concentration goes beyond 0.05 M. A red shift in energy band gap is also observed for both the cases. Nanoparticles with low cobalt concentrations were found to have paramagnetic nature with no antiferromagnetic coupling. A negative Curie–Weiss temperature of −75 K with antiferromagnetic coupling was obtained for the high cobalt concentration.     

低VOC涂料用成膜助剂

随着环保法规的日益严格和人们环境质量意识的增强,研发新型材料,采用新工艺是降低VOC的有效途径。本文介绍了新型油酸类无溶剂型成膜助剂,能有效降低涂料中的VOC含量以及提高涂料相应性能。     

Basic considerations in selection of bucketwheel excavators

Abstract

The bucketwheel excavators offers a number of advantages as compared to the standard surface mining equipment. However, to realize these advantages and make a bucketwheel excavator operation efficient, the excavator design must reflect the site specific conditions, the efficient operating procedures must be developed, and sufficient digging force must be available at the digging wheel.     

Application of spherical and other polymers in capillary zone electrophoresis: separation of antiviral drugs and deoxyribonucleoside phosphates by different principles

Soluble polymers of linear chains with limited branching and spherical polymers (limit dextrins and sucrose, such as Dextran and Ficoll (Pharmacia Chemicals), yielding lower viscosities, are examined here for the separation of different nucleotides and several anti-AIDS drugs by capillary zone electrophoresis (CZE). The linear polymer forms a network but spherical polymers appear to create a second pseudo-phase. In general, they tend to enhance the solute mobility and reduce peak width; thus, they improve the column efficiency. We observe that the beads of a spherical polymer produce a pseudo-phase even in a very low polymer concentration. The proposed method involving a spherical polymer yields the best separation for twelve deoxyribonucleoside mono-, di- and triphosphates in ca. 10 min. Common anti-AIDS drugs (ddA, ddC, ddI, d4T, AZT) and an AZT metabolite (AZT-glucuronate) are resolved by using conventional micellar electrokinetic capillary chromatography (MEKC). These results not only offer fast and highly sensitive detection techniques for the pharmacokinetics of nucleotides, drugs, and their metabolites, but they also demonstrate an application of the proposed second pseudo-phase involving spherical polymer beads in CZE separations.     

Native and oxidized low density lipoproteins modulate mesangial cell apoptosis

Hyperlipidemia has been demonstrated to contribute to hypercellularity of the mesangium in experimental animal models of glomerulosclerosis. We studied whether it also has the potential to convert a hypercellular mesangium into a hypocellular one by inducing mesangial cell (MC) apoptosis. Low density lipoprotein (LDL) enhanced (P < 0.001) mouse mesangial cell (MMC) proliferation at lower concentrations (control, 10.3 +/- 0.3 vs. LDL 100 micrograms/ml, 24.2 +/- 0.3 x 10(4) cells/ml) but augmented (P < 0.001) apoptosis at higher concentrations (control, 5.6 +/- 0.5% vs. LDL, 500 micrograms/ml 26.2 +/- 3.4% apoptotic cells/field). Oxidized (OX) LDL enhanced MMC apoptosis in concentrations of 50 to 200 micrograms/dl. There was a direct relationship between MMC apoptosis and oxidation of LDL as judged by measuring thiobarbituric acid reactive species (TBARS). Since superoxide dismutase (SOD) attenuated (P < 0.001) LDL-induced MMC apoptosis, it seems to be mediated through the generation of free radicals by mesangial cells (control, 4.3 +/- 1.5%; LDL, 200 micrograms/ml, 19.4 +/- 0.5%; LDL + SOD, 8.1 +/- 1.3% apoptotic cells/field). LDL also induced a similar effect on human mesangial cells. These studies were further confirmed by DNA fragment assays and ELISA for programmed cell death. LDL treated cells also showed enhanced mRNA expression for RSG-2, a marker for active cell death. These in vitro results provide a basis for the speculation that LDL has the potential to cause an initial hypercellular and subsequent hypocellular mesangium in the course of the development of glomerulosclerosis.     

Effect of long-term stress and temperature exposure on the fracture toughness of Ti-62222 alloy

Fracture toughness tests were conducted on a Ti-62222 (titanium alloy) sheet being considered for use in high temperature aircraft applications in the as received condition and after exposing the pre-cracked specimens to a sustained stress intensity, K, level between 55 and 60.5 MPa for 200 h at 350°C. It was concluded that the fracture toughness does not degrade as a result of exposure to high temperature and the K levels in this material. The tensile strength in the exposed condition also remained the same as in the as received condition.