Turbulent natural convection heat transfer from a vertical plate to the power-law fluid at high prandtl numbers

A simple analytical technique for turbulent natural convection heat transfer from an isothermal vertical plate to a power-law fluid is developed. The model is based on the assumption that the turbulent heat transfer rate is controlled by the flow characteristic near the surface in the limit of large Prandtl numbers. The formulation proposed in this work agrees well with the correlations available in the literature.     

Coalescence of bubbles and stability of foams in aqueous solutions of Tween surfactants

Coalescence of air bubbles and stability of foams in aqueous solutions of Tween 20, 40, 60 and 80 are reported in this work. Adsorption of the surfactants at air–water interface was studied by measuring the surface tension of the surfactant solutions. The surface tension profiles were fitted using a surface equation of state derived from the Gibbs and Langmuir adsorption equations. The critical micelle concentration and surface tension at this concentration were determined. The effect of surfactant concentration on coalescence of air bubbles at flat air–water interface was studied. The role of steric force on coalescence time was investigated. The coalescence time distributions were fitted by the stochastic model. The mean values of the distributions were compared with the predictions of seven film-drainage models. Stability of foams was analyzed by the Ross–Miles test. The initial and residual foam heights were measured at different surfactant concentrations. The stability of foams was compared with the coalescence time of the bubbles.     

Synthesis,characterization, and properties of new siloxane grafted copolyimides

Three new siloxane containing grafted copolyimides have been prepared by one‐pot solution imidization technique. The polymers are made by the reaction of 4,4′‐(4,4′‐isopropylidenediphenoxy)bis(phthalic anhydride) (BPADA) with commercially available diamine 4,4′‐oxydianiline (ODA) with variation of silicon containing diamine, namely 3,5‐diaminobenzoate terminated polydimethylsiloxane (DBPDMS), as a comonomer to 10, 20, and 30 wt %. The films of the polymers were prepared by casting the polymer solution in dichloromethane. The polymers have been well‐characterized by GPC, IR, and NMR techniques. Thermal stabilities and decomposition behavior of the copolyimides were studied by DSC and TGA. The water contact angle values of the films indicate hydrophobic nature of the polymers. Thermal, flame retardant, mechanical, and surface properties of these polymers have been compared with the homopolyimide and with polyimides where polysiloxane is incorporated in the main chain. DSC revealed melting of the grafted siloxane chain at sub‐ambient temperature and a glass transition corresponding to the main polymer chain above 200°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Experimental investigation of spray characteristics of kerosene and ethanol-blended kerosene using a gas turbine hybrid atomizer

Gas turbines have wide application as prime movers in transportation and power generating sectors, most of which are driven by fossil fuels like kerosene. The conventional fuels are associated with problems of air pollution, and the fuel reserves are getting depleted gradually. Addition of ethanol in kerosene leads to better spraying characteristics. The present work deals with the spray characteristics of pure kerosene and 10%-ethanol-blended (by volume) kerosene using a novel gas-turbine hybrid atomizer. Here the inner air and outer air enter in the same and opposite directions, respectively, with respect to the fuel flow direction into the atomizer and a high swirling effect occurs outside the nozzle. The fuel stream is sandwiched between two annular air streams and the flow rate of inner and outer air is varied continuously. Various spray stages like distorted pencil, onion, tulip and fully developed spray regimes have been observed. The breakup length, cone angle and sheet width of the fuel stream are analysed directly from backlit imaging for different fuel and air flow rates. From the image processing, it is observed that breakup occurs at an early stage for 10%-ethanol-blended kerosene due to low viscosity of ethanol. It is also observed that at higher air flow rate, breakup occurs at an early stage due to turbulent nature of the fuel stream.     

Epidemiological study of hypertension and its determinants in an urban population of North India

OBJECTIVES: To determine age-specific prevalence of hypertension and blood pressure (BP) levels in relation to diet and lifestyle factors in North Indians. DESIGN AND SETTING: Cross-sectional survey in 20 randomly selected streets in Moradabad, North India. SUBJECTS AND METHODS: A total of 1806 subjects from North India (904 males and 902 females) age range 25-64 years. The survey methods were as follows: dietary diaries for 7 days food intake record; BP measurements; physician administered questionnaire and anthropometric measurements. Diagnosis of hypertension was based on new World Health Organization/International Society of Hypertension (WHO/ISH) criteria. Risk factors were assessed based on WHO guidelines. RESULTS: The prevalence of hypertension according to WHO/ISH criteria was 23.7% and by old WHO criteria 13.3%. In the WHO/ISH hypertensive group, isolated diastolic hypertension was present in 47.3% males and 40.6% females. Males have a slightly higher prevalence than females in the young age group, however, the prevalence rates are comparable in the older age groups. In both sexes, the prevalence rates and BP level increased with older age. Multivariate analysis revealed that age, higher body mass index, central obesity and higher socioeconomic status were independently and strongly associated with hypertension in both sexes. Higher dietary fat and salt intake and lower physical activity were weakly but significantly associated with hypertension. CONCLUSION: Association of higher socioeconmic status, higher body mass index and central obesity in North Indian adults with higher fat intake, lower physical activity and higher prevalence and level of hypertension indicate that these populations may benefit by decreasing the dietary fat intake and increasing physical activity, with an aim to decrease central obesity for decreasing hypertension in North Indians.     

Topographic variation in biglycan and decorin synthesis by articular cartilage in the early stages of osteoarthritis: an experimental study in sheep

From October 1988 to January 1992, nine isolates of Pseudomonas aeruginosa carrying transferable plasmids encoding imipenem-hydrolyzing beta-lactamase (pI = c. 9.5) were recovered from nine different patients in a neurosurgical ward of a hospital in Japan. The beta-lactamase activities of the sonicated extracts from the transconjugants were inhibited by EDTA and this was partially reversible by the addition of zinc cation. The substrate specificity and pI of the beta-lactamase were similar to those of the metallo beta-lactamases from P. aeruginosa and Serratia marcescens TN9106. All strains were resistant to imipenem, carbenicillin and antipseudomonal cephems including ceftazidime, cefsulodin, cefpirome, while four and five strains were susceptible to piperacillin and aztreonam, respectively. Both low level imipenem resistance and high level cephem resistance were co-transferred with the production of metallo beta-lactamase, while resistance to piperacillin, aztreonam, and high level imipenem-resistance were not selected. Production of chromosomal cephalosporinase in piperacillin resistant strains was derepressed, and production of outer membrane protein of D2 was diminished in highly imipenem resistant strains. Six strains were isolated in 1991, and the amounts of antipseudomonal agents, especially imipenem, used in the neurosurgical ward increased markedly in this year. Only three of the nine isolates had the same serotype, pyocin type and phage type. Our results suggest that the repeated isolation of imipenem and cephem-resistant P. aeruginosa producing metallo beta-lactamase was related to the high usage of antipseudomonal beta-lactam antibiotics such as imipenem, and was exacerbated by the dissemination of a plasmid.     

Thermodynamic and kinetic modeling of the Cr-Ti-V system

A synergistic approach of thermodynamic and kinetic modeling is applied to the Cr-Ti-V system. To assist the design of (α+β) and β titanium alloys for structural applications and vanadium alloys for fusion reactor applications, a set of self-consistent and optimized thermodynamic model parameters is presented to describe the phase equilibria of the Cr-Ti, Cr-V, Ti-V, and Cr-Ti-V systems. The Laves phases, α-Cr₂Ti, β-Cr₂Ti, and γ-Cr₂Ti, are described by a two-sublattice model assuming antistructure atoms on both sublattices. The calculated thermodynamic quantities and phase diagrams are in good accord with the corresponding experimental data. To assist the simulation of the kinetics of diffusional transformations in bodycentered cubic (bcc) alloys, the atomic mobilities of Cr, Ti, and V are modeled. A set of optimized mobility parameters is given. Very good agreement between the calculated and experimental diffusivities was found.     

Analysing the patterns of spatial contrast discontinuities in natural images for robust edge detection

Pattern Analysis and Applications - The pattern of spatial contrast discontinuities in natural images has been analysed in the present work, and based on it, a new adaptive model of the...     

Conducting blends of poly(o‐toluidine) and ethylene–propylene–diene terpolymer

Poly(o‐toluidine) (POT) is an electroactive polymer with poor mechanical and thermal characteristics. We examined the scope for improving such properties by making blends of POT with ethylene–propylene–diene rubber (EPDM). We prepared POT–EPDM blends containing different weight fractions of POT by intimately mixing known volumes of separate solutions of the two polymers (POT in THF and EPDM in toluene). Films of EPDM and POT–EPDM blends in solution were obtained by spreading, solvent evaporation, and film casting techniques. POT, EPDM, and their blends were characterized in solution by ultraviolet‐visible spectroscopy, and the respective dried samples were analyzed by Fourier transform infrared spectroscopy and thermogravimetry. The polymer samples were further analyzed morphologically by scanning electron microscopy, and their tensile strengths were also evaluated. Spectroscopic and thermal studies of the blends indicated some sort of interaction between the two constituent polymers. The direct current electrical conductivity of the blends in increasing order of POT loading (12.5–100%) was in the range 9.9 × 10^?5 to 11.6 × 10^?2 S cm^?1. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2550–2555, 2003     

Effect of copper additions in directly quenched titanium–boron steels

The present study concerns the effect of copper additions on the microstructural evolution and mechanical properties of directly quenched Ti–B steels. Ti and B are added as microalloying elements with an aim of achieving adequate austenite hardenability and Cu is added to retard the austenite (γ) → ferrite (α) transformation. Therefore, the microalloying and Cu additions together allow the transformation of austenite to occur at a lower temperature, resulting in a finer microstructure containing martensitic constituents. The direct-quenching route is adopted with an aim of facilitating the nucleation of the constituent phases from the deformed austenite. In order to circumvent the hot-shortness due to the Cu addition, 0.79 wt% Ni has been added to one of the 1.5 wt% Cu microalloyed steels. The present study has demonstrated that the Ni-containing 1.5Cu–Ti–B steel is capable of providing an attractive combination of strength and ductility comparable to the high strength varieties of HSLA steels in directly quenched condition.