Dynamic mechanical behavior and nanostructure morphology of hyperbranched‐modified polypropylene blends

Polypropylene (PP) was modified utilizing two types of polyesteramide‐based hyperbranched polymers (amphiphilic PS and hydrophilic PH). A maleicanhydride‐modified PP (PM) was used as a reactive dispersing agent to enhance the modification by grafting the hyperbranched polymers onto the PP chains. Pure PP, two different non‐reactively modified samples, i.e. excluding PM, and two different reactively modified samples, i.e. including PM, were studied. Investigating the morphology of the samples was performed by scanning electron microscopy. To follow the effect of the modification on the dynamic mechanical properties, dynamic mechanical analysis experiments both in the melt (rheometric mechanical spectrometry) and in solid state (dynamic mechanical thermal analysis) were carried out. In the next step, the nanocrystalline structure of the samples was studied by small angle X‐ray scattering (SAXS) in two different modes, i.e. static and recrystallization. Hundreds of SAXS patterns were analyzed automatically using procedures written in PV‐WAVE image‐processing software. The chord distribution function (CDF) was calculated and the long period (l_p) of the crystal lamellae was extracted from the CDFs. The rheometric mechanical spectrometry results show that both hyperbranched polymers decrease complex viscosity η^* and enhance liquid‐like behavior. This happens more significantly when PM is included. The dynamic mechanical thermal analysis results reveal that T_g decreases when PS and PH are added. In the reactively modified samples this reduction is compensated most probably because of the crosslinked structure formed through the grafting reaction between the hyperbranched polymers and PM. Such structure is confirmed by SAXS data and calculated CDFs in the recrystallization mode. Static SAXS data also show enhancement in the crosshatched morphology of the crystalline lamellae of PP for reactively modified samples compared with non‐reactively modified samples. © 2013 Society of Chemical Industry     

p‐TCOs für Transparente Elektronik

p‐type TCOs for use in transparent electronics In this article, a new type of semiconducting material is introduced. Transparent conducting thin films are already established in our everydaylife. But the type of these so‐called ?TCOs”? is dominated by electron transport, that means they are n‐type. To get transparent p‐n‐junctions and therefore transparent electronics, the missing part is a transparent p‐type material. Researchers all over the world have found different approach to produce this new generation of materials. At the Fraunhofer Institute for Surface Engineering and Thin Films (IST) in Braunschweig it is now possible to produce these kind of thin films as well.     

Zwitterionic‐Coated “Stealth” Nanoparticles for Biomedical Applications: Recent Advances in Countering Biomolecular Corona Formation and Uptake by the Mononuclear Phagocyte System

Nanoparticles represent highly promising platforms for the development of imaging and therapeutic agents, including those that can either be detected via more than one imaging technique (multi‐modal imaging agents) or used for both diagnosis and therapy (theranostics). A major obstacle to their medical application and translation to the clinic, however, is the fact that many accumulate in the liver and spleen as a result of opsonization and scavenging by the mononuclear phagocyte system. This focused review summarizes recent efforts to develop zwitterionic‐coatings to counter this issue and render nanoparticles more biocompatible. Such coatings have been found to greatly reduce the rate and/or extent of non‐specific adsorption of proteins and lipids to the nanoparticle surface, thereby inhibiting production of the “biomolecular corona” that is proposed to be a universal feature of nanoparticles within a biological environment. Additionally, in vivo studies have demonstrated that larger‐sized nanoparticles with a zwitterionic coating have extended circulatory lifetimes, while those with hydrodynamic diameters of ≤5 nm exhibit small‐molecule‐like pharmacokinetics, remaining sufficiently small to pass through the fenestrae and slit pores during glomerular filtration within the kidneys, and enabling efficient excretion via the urine. The larger particles represent ideal candidates for use as blood pool imaging agents, whilst the small ones provide a highly promising platform for the future development of theranostics with reduced side effect profiles and superior dose delivery and image contrast capabilities.     

Characterization of a miniaturized liquid bridge for nL sample infusion: a comparative study of sample flush-out behavior using flow simulations and direct ESI-MS analysis

In this work we shed light on the microfluidics of a miniaturized liquid bridge that forms the central part of a so-called “capillary gap sampler,” a novel device for rapid and seamless injection of nanoliter sample volumes into an electrospray ionization mass spectrometer (ESI-MS). Parameters relevant for sample flush-out at the liquid bridge and in the spray capillary were identified by systematic variation of the capillary dimensions, the linear buffer flow rate (2.1–34 mm/s) and molecular weight of the analytes (0.5–30 kDa). We found that a reduction in capillary wall thickness by a factor of 1.6 significantly influences analyte peak shapes, leads to an inversion of the relationship between peak width and analyte molecular weight, and allows a fivefold decrease in peak width for large molecules down to 5 s. The results could be verified and explained by simulations, in which the presence of diffusion-controlled “dead zones” at the liquid bridge and dispersion in the spray tip that depend on analyte molecular weight were identified as key factors relevant for the sample flush-out process. The merging of simulations and experimental data gives useful hints toward the re-design of a spray tip as built-in ESI-MS interface for an optimized gap sampler performance.     

Unidirectional bubble growth in microchannels with asymmetric surface features

The growth of vapor bubbles is studied numerically in a microchannel with asymmetric surface features. The channel design is chosen such that evaporation results in vapor bubbles growing only along a predefined direction. The principle relies on capillary forces and the pinning/depinning of three-phase contact lines at sharp edges of the wall geometry. Analytical expressions are derived predicting the direction of bubble growth and allowing to assess the robustness of a specific channel geometry in terms of supporting unidirectional bubble growth. From these expressions design rules for microchannels incorporating geometrical parameters and the wall contact angle of the liquid phase can be derived. The numerical calculations are performed based on an extended Volume-of-Fluid method accounting for phase change. The results confirm that under specific conditions, vapor bubbles only expand in one direction, thereby corroborating the analytical model. The presented concept may find applications in designing microchannels for stabilized flow boiling or micropumps/-actuators relying on phase change.     

A comparison between state-of-the-art and neural network modelling of solar collectors

The state-of-the-art modelling of solar collectors as described in the European Standard EN 12975-2 is based on equations describing the thermal behaviour of the collectors by characterising the physical phenomena, e.g. transmission of irradiance through transparent covers, absorption of irradiance by the absorber, temperature dependent heat losses and others. This approach leads to so called collector parameters that describe these phenomena, e.g. the zero-loss collector efficiency η₀ or the heat loss coefficients a₁ and a₂.Although the state-of-the-art approach in collector modelling and testing fits most of the collector types very well there are some collector designs (e.g. “Sydney” tubes using heat pipes and “water-in-glass” collectors) which cannot be modelled with the same accuracy than conventional collectors like flat plate or standard evacuated tubular collectors. The artificial neural network (ANN) approach could be an appropriate alternative to overcome this drawback.To compare the different approaches of modelling investigations for a conventional flat plate collector and an evacuated “Sydney” tubular collector have been carried out based on performance measurements according to the European Standard EN 12975-2. The investigations include the parameter identification (training), the comparisons between measured and modelled collector output and the simulated yearly collector yield for a solar domestic hot water system for both models.The obtained results show better agreement between measured and calculated collector output for the artificial neural network approach compared with the state-of-the-art modelling. The investigations also show that for the ANN approach special test sequences have to be designed and that the determination of the ANN that fits the thermal performance of the collector in the best way depends significantly on the expertise of the user.Nevertheless artificial neural networks have the potential to become an interesting alternative to the state-of-the-art collector models used today.     

Salmonella enterica serotype Kentucky associated with human infections in Switzerland: Genotype and resistance trends 2004–2009

Salmonella serotype Kentucky emerged since 2002 and now ranks among the top ten serovars isolated from humans in Europe, and 8th to 10th in Switzerland. A total of 106 strains isolated from different patients from 2004 through 2009 in Switzerland were further characterized by (i) assessing phenotypic antibiotic resistance profiles using the disk diffusion method and (ii) by genotyping using pulsed-field gel electrophoresis (PFGE) after macrorestriction with XbaI in order to evaluate strain relationships and trends.In Switzerland, there is evidence for an outbreak in 2006 as the annual incidence almost doubled. A total of 30 strains (28%) were resistant or showed intermediate resistance to one to three antimicrobials and 48 strains (45%) displayed resistance to more than three antibiotics. We found a high prevalence (67%) of nalidixic acid resistance, and 58% were resistant to ciprofloxacin. One strain was a producer of extended-spectrum β-lactamase (ESBL). PFGE discriminated four clusters (similarity coefficient cut off at 80%).The resistance situation among the strains isolated from 2004 to 2009 in Switzerland is discussed and shown to coincide with findings in other European countries. Based on genetic subtyping, a so far undetected outbreak is likely to have occurred in Switzerland in 2006. Finally, our data identified travelling to Northern Africa as a risk factor for S. Kentucky infections.     

Imaging of Extracellular pH Using Hyperpolarized Molecules

Many diseases can overrule natural pH regulatory mechanisms and alter the extracellular pH (pH_e). A non-invasive method that resolves pH_e in vivo with high spatial and temporal resolution could therefore improve diagnosis and monitoring of diseases, contributing to the concept of precision medicine. During the last decades, several techniques have been proposed to image pH_e non-invasively. The majority of these methods rely on magnetic resonance because of its good spatial resolution, high penetration depth, non-ionizing radiation and excellent complimentary soft tissue contrast. Dissolution dynamic nuclear polarization (DNP) is an emerging concept to enhance nuclear magnetic resonance (NMR) signals by more than four orders of magnitude, making it possible to observe in vivo metabolic processes in real-time. Here, we summarize and review recent developments in pH_e imaging techniques based on hyperpolarization methods and give an overview of recently discovered hyperpolarized pH sensor molecules that have been applied in vitro and in vivo.