An Analytical Drain Current Model of Gate-On-Source/Channel SOI-TFET

Silicon - This paper presents an analytical drain current model of Gate-on-Source/Channel SOI-TFET. While deriving the drain current, at first surface potential is derived considering the effect of...     

A novel lutetium(III) PVC membrane sensor based on a new symmetric S–N Schiff's base for Lu(III) analysis in real sample

A novel Lu(III) PVC membrane sensor has been constructed based on a new synthesized symmetric S–N Schiff's base, namely N-[(Z)-1-(2-thienyl)methylidene]-N-[4-(4-{[(Z)-1-(2-thienyl) methylidene]amino}benzyl)phenyl] amine (TBPA). The electrode showed a Nernstian slope of 19.8 ± 0.5 mV per decade across a wide concentration range of 1.0 × 10^? 6 to 1.0 × 10^? 2 mol L^? 1 with a detection limit of 7.2 × 10^? 7 mol L^? 1. The proposed sensor showed high selectivity toward Lu(III) ion in comparison with common alkaline, alkaline earth, transition, and heavy metals specially lanthanide ions, and could be used over a pH range of 2.7–10.6. It can be used for at least 2 months without any considerable divergency in potentials and it has a relatively fast response time of < 10 s. The sensor was effectively used as an indicator electrode in the potentiometric titration of Lu(III) ions with EDTA. The constructed sensor accuracy was investigated by the monitoring of Lu(III) ion in mixtures of two and three different ions.     

Resonant behavior of EHV transformer windings under system originated oscillatory transient over voltages

Grid connected EHV transformers experience various terminal disturbances when in service. The present work attempts to investigate the voltage stresses that may develop on the transformer insulations under a variety of terminal disturbances. A number of standard and non-standard wave shapes like lightning impulse, chopped lightning impulse, steep-front long tail switching surge and oscillatory transient over voltages have been simulated and impressed on the terminals of a 400 kV EHV power transformer operating in the Indian power grid to ascertain how the winding insulations are stressed under these disturbances. Relevant section of the Indian power grid and the transformer has been modeled using Alternative Transient Program (ATP). It has been established that oscillatory system transients can trigger natural resonate frequencies of the transformers causing high voltage stresses on the insulations. Short Time Fourier Transform (STFT) analysis of the oscillatory voltage response of the windings confirmed the presence of resonant frequencies indicating forced resonance. Some remedial measures involving winding design modifications have been suggested in the paper to overcome the problem.     

Washcoating of Different Zeolites on Cordierite Monoliths

Cordierite monoliths were washcoated with slurries of different zeolites (ZSM5, β zeolite, mordenite, and Zeolite Y) in order to establish the relationship between washcoat characteristics and the powder and slurry properties. To achieve this objective, initially, the zeolite particle size was reduced to 2–3 μm by wet ball milling, and during this process the crystallinity and surface area of the powder were not significantly affected. The rheological behavior of the zeolite slurries is a function of the type of zeolite and solid content. The washcoat properties, such as loading, thickness, uniformity, and reproducibility, depend on the particle size of the powder, number of immersions, slurry concentration, slurry viscosity, and surface tension. The mechanical stability of the zeolite washcoat decreases with an increase in cumulative loading and slurry particle size. Addition of binder (colloidal silica) results in an improvement in zeolite loading and washcoat adherence.     

NR/SBR/organoclay nanocomposites: Effects of molecular interactions upon the clay microstructure and mechano‐dynamic properties

Nanocomposites based on (70/30) blends of natural rubber (NR), styrene‐butadiene rubber (SBR), and organoclay (OC) have been prepared successfully via melt‐mixing process. Effects of the extent of polymers/clay interactions upon the developed microstructure, fatigue life, and dynamic energy loss by the nanocomposites have been investigated. Maleated EPDM (EPDM‐g‐MAH) and epoxidized NR (ENR50) were employed as compatibilizer. Nanocomposites were characterized by means of X‐ray diffractometer (XRD), transmission electron microscope (TEM), scanning electron microscope, atomic force microscopy, root mean square, and dynamic mechanical thermal analysis. EPDM‐g‐MAH showed more potential in enhancing dispersion of the clay nanolayers and their interaction with rubber phases. More potential for separating and dispersing the clay nanoplatelets with better interface enhancement was exhibited by EPDM‐g‐MAH as compatibilizer. This was consistent with higher resistance towards large strain cyclic deformations along with more heat build‐up characteristics showed by EPDM‐g‐MAH based nanocomposites especially at compatibilizer/organoclay ratio of 3. Pronounced non‐terminal behavior within low frequency region was also observed for melt storage modulus of this nanocomposite, indicating higher extent of intercalation/exfoliation microstructure with reinforced interfaces than the nanocomposite generated by ENR50. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A sequentially integrated multi-criteria optimization approach applied to laser transmission weld quality enhancement—a case study

In the present research, a sequentially integrated optimization approach, based on Taguchi method, response surface methodology, and desirability function analysis, is proposed for evaluating the optimal set of laser transmission welding parameters. Two quality characteristics namely, weld strength and weld width, and three welding parameters namely laser power, welding speed, and focal position are selected for experimental work. Taguchi quality loss function is first used to find the optimum level of control factors. The outputs of Taguchi analysis is further used in central composite design for developing response surface models. Desirability function analysis is performed next using the developed response surface models, to evaluate the optimal parameters setting by considering multiple objectives. The weld quality is improved markedly at the optimal process condition, as verified by additional confirmation tests. The performance of the proposed optimization approach is also compared with the Taguchi method and grey–Taguchi method and found that the proposed optimization approach gives better results than the other two techniques.     

The Solid Particle Erosion Behavior of Carbon/Carbon and Carbon/Phenolic Composite Used in Re-entry Vehicles

Several engineering components made of carbon-based heat-resistant composites are subjected to severe erosive wear. In view of the above, the solid particle erosion behavior of two and four dimensionally reinforced carbon/carbon (C/C) composites as well as that of carbon/phenolic (C/P) composite has been characterized at the ambient temperature. The investigated C/C composites have been produced through a liquid-phase infiltration method followed by hot isostatic pressing, while the C/P composite prepegs have been cured inside an autoclave. The erosion rates of these composites have been determined for two different impact angles and two different impact velocities using silica sand with average particle diameter of 200 μm. The morphologies of as-received and eroded surfaces of test specimens have been examined with the help of scanning electron microscopy to understand the mechanism of material removal. The erosion response, erosion efficiency, and erosion micromechanisms of these composites have been studied in detail. While the erosion resistance of the C/P composite is found to be superior to that of the investigated C/C composites, the four dimensionally reinforced C/C composite have shown the highest erosion efficiency. All the composites have exhibited a semi-ductile erosion response. Their mechanical properties have little correlation with the erosion rates.     

Thermal and XPS studies on polyaniline salts prepared by inverted emulsion polymerization

Conductive polyaniline salts were synthesized by inverted emulsion polymerization method and were characterized by thermogravimetric analysis (TGA), thermogravimetry‐mass (TGA‐MS) analysis, and X‐ray photoelectron spectroscopy (XPS) methods. The various characteristic fragments evolved during the thermal degradation of polyaniline were identified. The weight loss of dopants as well as sodium lauryl sulfate decomposition were identified at different temperatures from TGA‐MS analysis. The kinetic analysis of the thermal decomposition processes of polyaniline in doped state was performed. Broido, Chang, and Friedman methods were used for the evaluation of kinetic parameters in nitrogen atmosphere. High resolution XPS analysis was used to provide a method of differentiating the presence of nitrogen and carbon associated in the different environments in the polyaniline base and doped‐samples. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 499–508, 2006     

Application of grey-based Taguchi method for simultaneous optimization of multiple quality characteristics in laser transmission welding process of thermoplastics

In the present work, Taguchi method in combination with grey relational analysis is applied for solving multi-criteria optimization problems in laser transmission welding processes. The welding parameters, namely laser power, welding speed and defocal position are optimized with respect to weld strength and weld width. Using the Taguchi quality design concept, an L16 orthogonal array table is chosen for the experiments. Grey relational analysis is applied to convert the multiple quality characteristics to a single performance characteristic called grey relational grade. Optimal welding parameters are then determined by the Taguchi method using grey relational grade as the quality index. Furthermore, analysis of variance is carried out to identify the most significant factor for the overall output feature of the laser transmission welding process. The results of the confirmation experiment show that the optimal laser transmission welding parameters can be determined effectively so as to improve multiple quality characteristics through this approach.     

Cost-benefit analysis of different hydrogen production technologies using AHP and Fuzzy AHP

In this paper, cost-benefit analysis is performed to compare eight different hydrogen production technologies using the classical analytic hierarchy process (AHP) and the Fuzzy AHP. The technologies considered are steam methane reforming, coal gasification, partial oxidation of hydrocarbons, biomass gasification, photovoltaic-based electrolysis, wind-based electrolysis, hydro-based electrolysis, and water splitting by chemical looping. For each of the hydrogen production technologies, five criteria are used for evaluation: greenhouse gas emissions, raw material and utilities consumption, energy efficiency, scalability, as well as waste disposal and atmospheric emissions. The results obtained for benefits category using AHP and Fuzzy AHP are plotted against the normalized equivalent annual costs of each technology. It is concluded that the fossil fuel based processes appear to have less beneficial qualities including greater environmental impacts, but are more cost-effective. On the other hand, the renewable based processes appear to have more benefits as well as being more expensive for hydrogen production. However, the cost-benefit analysis results imply that the process of water splitting by chemical looping among the renewable approaches is the most promising new technology.