Accurate estimation of capacities and cross-traffic of all links in a path using ICMP timestamps

The estimation of the link capacity and its available bandwidth in an end-to-end path is crucial for network management, admission control and flow control for adaptive applications. This paper introduces an estimation mechanism able to accurately estimate the available bandwidth of all links in an end-to-end path, through its capacity and cross-traffic estimation. The estimation procedures resort to the dispersions of packet pairs and trains using the concepts of ICMP Timestamp and Traceroute that, efficiently used together, enable the measurement of the dispersions in all links in the path. These mechanisms were evaluated through simulation experiments, where we analyzed the influence of the several network parameters on each estimation mechanism. The results show that these estimation methods are able to accurately estimate both the capacity and the cross-traffic of all links in a path with moderate length and with low overhead.     

Organic Single Crystal Patterning Method for Micrometric Photosensors

Light detection technologies are of interest due to their applications in energy conversion and optical communications. Single-crystal organic semiconductors, such as rubrene, present high detectivities and charge carrier mobility, making them attractive for light-sensing applications. Growth of high crystallinity organic crystals is achieved using vapor processes, forming crystals of arbitrary shapes and orientations and requiring posterior patterning processes. However, patterning the organic semiconductors using industry-standard microfabrication techniques is not straightforward, as these often cause irreversible damage to the crystals. Here the fabrication of patterned micrometric rubrene photosensors is demonstrated through a combination of photolithography and Reactive Ion Etching steps. Protective layers during microfabrication minimize degradation of optoelectronic properties of the organic single crystals during fabrication. Crystals undergoing the patterning process presented a survival rate of 39%. Photoresponse values of up to 41 mA W⁻¹ are obtained under illumination at 500 nm. This opens a route for the industrial-scale fabrication process of high-performance optoelectronic devices based on organic crystals semiconductors.     

Complete Characterization of the O-Antigen from the LPS of Aeromonas bivalvium

Aeromonas species are found in the aquatic environment, drinking water, bottled mineral water, and different types of foods, such as meat, fish, seafood, or vegetables. Some of these species are primary or opportunistic pathogens for invertebrates and vertebrates, including humans. Among the pathogenic factors associated with these species, there are the lipopolysaccharides (LPSs). LPSs are the major components of the external leaflet of Gram-negative bacterial outer membrane. LPS is a glycoconjugate, generally composed of three portions: lipid A, core oligosaccharide, and O-specific polysaccharide or O-antigen. The latter, which may be present (smooth LPS) or not (rough LPS), is the most exposed part of the LPS and is involved in the pathogenicity by protecting infecting bacteria from serum complement killing and phagocytosis. The O-antigen is a polymer of repeating oligosaccharide units with high structural variability, particularly the terminal sugar, that confers the immunological specificity to the O-antigen. In this study, we established the structure of the O-chain repeating unit of the LPS from Aeromonas bivalvium strain 868 E^T (=CECT 7113^T = LMG 23376^T), a mesophilic bacterium isolated from cockles (Cardium sp.) and obtained from a retail market in Barcelona (Spain), whose biosynthesis core LPS cluster does not contain the waaE gene as most of Aeromonas species. After mild acid hydrolysis, the lipid A was removed by centrifugation and the obtained polysaccharide was fully characterized by chemical analysis and NMR spectroscopy. The polymer consists of a heptasaccharide repeating unit containing D-GalNAc, L-Rha, D-GlcNAc, and D-FucNAc residues.     

Lipidomic Approaches to Study HDL Metabolism in Patients with Central Obesity Diagnosed with Metabolic Syndrome

The metabolic syndrome (MetS) is a cluster of cardiovascular risk factors characterised by central obesity, atherogenic dyslipidaemia, and changes in the circulating lipidome; the underlying mechanisms that lead to this lipid remodelling have only been partially elucidated. This study used an integrated “omics” approach (untargeted whole serum lipidomics, targeted proteomics, and lipoprotein lipidomics) to study lipoprotein remodelling and HDL composition in subjects with central obesity diagnosed with MetS (vs. controls). Compared with healthy subjects, MetS patients showed higher free fatty acids, diglycerides, phosphatidylcholines, and triglycerides, particularly those enriched in products of de novo lipogenesis. On the other hand, the “lysophosphatidylcholines to phosphatidylcholines” and “cholesteryl ester to free cholesterol” ratios were reduced, pointing to a lower activity of lecithin cholesterol acyltransferase (LCAT) in MetS; LCAT activity (directly measured and predicted by lipidomic ratios) was positively correlated with high-density lipoprotein cholesterol (HDL-C) and negatively correlated with body mass index (BMI) and insulin resistance. Moreover, many phosphatidylcholines and sphingomyelins were significantly lower in the HDL of MetS patients and strongly correlated with BMI and clinical metabolic parameters. These results suggest that MetS is associated with an impairment of phospholipid metabolism in HDL, partially led by LCAT, and associated with obesity and underlying insulin resistance. This study proposes a candidate strategy to use integrated “omics” approaches to gain mechanistic insights into lipoprotein remodelling, thus deepening the knowledge regarding the molecular basis of the association between MetS and atherosclerosis.     

Correlation between polyethylene topology and melt flow instabilities by determining in-situ pressure fluctuations and applying advanced data analysis

Using three high sensitive pressure transducers located inside a slit-die of a capillary rheometer and applying a set of advanced mathematical tools to process the acquired time dependent pressure signals, we are able to detect in-situ pressure fluctuations associated with sharkskin instabilities. Other distortions, as spurt and gross melt fracture, can also be in-situ detected. This originates from a factor of 10³ and 10² improvement in terms of time and pressure resolution achieved using the new set-up and data analysis that it will be described in detail in this article. Our approach quantifies the effect of polymer topology and shear rate on the characteristic frequency and amplitude of these pressure fluctuations inside the die. Depending on the polymer structure and the shear rate, different instabilities with large deviation in their main properties at melt-state, can be determined. Based on our results, a polymer-independent power law relationship between the characteristic frequency of the instability and the apparent shear stress has been found. Combining this new technique with the advanced mathematical analysis used, clear evidences concerning the origin and location of these instabilities, could be established. According to our analysis, the spurt instability starts in the entrance of the die and it propagates downstream while increasing its velocity along the die. This was confirmed by non-zero-time-lags in the cross-correlation function between the transducers located inside the slit-die. In case of sharkskin instability, pressure fluctuations inside the die indicate that its origin could also be already inside the die instead of being exclusively located at the die-exit region, as stated in earlier investigations.     

Structural characterization of reactor blends of polypropylene and ethylene‐propylene rubber

Blends of isotactic polypropylene (PP), ethylene‐propylene rubber copolymer (EPR), and ethylene‐propylene crystalline copolymer (EPC) can be produced through in situ polymerization processes directly in the reactor and blends with different structure and composition can be obtained. In this work we studied the structure of five reactor‐made blends of PP, EPR, and EPC produced by a Ziegler‐Natta catalyst system. The composition of EPR was related to the ratio between ethylene and propylene used in the copolymerization step. The ethylene content in the EPR was in the range of 50–70 mol %. The crystallization behavior of PP and EPC in the blends was influenced by the presence of the rubber, and some specific interactions between the components could be established. By preparative temperature rising elution fractionation (P‐TREF) analysis, the isolation and characterization of crystalline EPC fractions were made. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2155–2162, 2004     

From coffee industry waste materials to skin‐friendly products with improved skin fat levels

Spent coffee grounds (SCG), which are the residue obtained from the treatment of coffee with hot water or steam, can be used for industrial applications, due to the high content in lipids. The cosmetic products might be a suitable application for these types of residues because the barrier properties of the stratum corneum (SC) are largely dependent on the intactness of the lipid lamellae that surrounds the corneocytes. The purpose of this work was to assess the feasibility of using the lipid fraction of SCG extracted with supercritical carbon dioxide in the development of new cosmetic formulations with improved skin lipids (sebum) and hydration. The use of spent coffee lipid extract in cosmetic industry seems to be a suitable approach to recycle the wastes from coffee industry. Emulsion containing 10% of the lipid fraction of SCG (SpentCofOil cream) presented promising characteristics in the improvement of sebum skin levels with a good acceptance by consumers when compared to an emulsion containing 10% w/w of green coffee oil (GreenCofOil cream) and a placebo without coffee oil (NoCofOil cream). Practical applications: In this work, the authors develop and characterize a cream containing 10% of the lipid fraction of SCG extracted with supercritical carbon dioxide with improved skin lipids (sebum) and hydration.