Numerical study on dynamic behavior of slope models including weak layers from deformation to failure using material point method

This paper describes numerical studies on the dynamic behavior of experimental slope models, including various inclined weak layers. These studies were conducted by simulation of shaking table tests using the material point method (MPM), which allows seamless treatment of various considerations, from elastic behavior to discontinuous collapse behavior of slopes, on the basis of an elasto-plastic constitutive law. The simulation results showed that the failure modes, progressive deformation and downward sliding of the numerical slope models, which were similar to that observed in the shaking table tests, can be obtained using the numerical method. In addition, sensitivity analyses of the numerical models used in this study were performed to determine the effects of mesh size, number of particles per cell (PPC) and damping constants on the simulation results. The results of these analyses indicated the use of fine meshes and high damping constants seems to produce sensible results and reduce numerical noises, respectively.     

Upper and lower critical solution temperatures in poly (ethylene glycol) solutions

Upper and lower critical solution temperatures have been determined for solutions of poly(ethylene glycol) in t-butyl acetate and water over the molecular weight range of M_η = 2.18 × 10³ to ～1020 × 10³. The phase diagram for solutions of poly(ethylene glycol) (M_η = 719 × 10³) in t-butyl acetate was expressed as the ‘hour glass’ type, while the phase diagram for solution of poly(ethylene glycol) (M_η = 2.18 × 10³ to ～2.29 × 10³) in water was expressed as the ‘closed loop’ type. The value of the pressure dependence of the lower critical solution temperature $\text{(}\text{d}\text{T}\text{d}\text{P}\text{)}{}_{\mathrm{c}}$ in the poly(ethylene glycol) (M_η = 1020 × 10³)/water system over the pressure range of 0 to ～50 atm was negligibly small and positive.     

Preferential Oxidation of CO in H2-Rich Gas at Low Temperatures over Au Nanoparticles Supported on Metal Oxides

We investigated Au catalysts supported on TiO₂, Fe₂O₃, and ZnO for their preferential oxidation of CO in a H₂-rich atmosphere. Both full conversion and selectivity were achieved over Au/Fe₂O₃ and Au/ZnO around room temperature, but at higher temperatures the CO conversion was suppressed due to competition between CO and H₂.     

Geometrical analysis of near polyhedral shapes with round edges in small crystalline particles or precipitates

Small crystalline particles or precipitates are often formed comprising near polyhedral shapes with round edges. Using the anisotropy of the surface energy given by a simple broken-bond model for fcc crystals, a geometrical analysis is performed to consider the particle-shape dependence of surface energy. Polyhedral and nearly polyhedral particles composed of {100} and {111} planes are treated as examples. The effect of round edges on the variation of surface energy of the nearly polyhedral particles is discussed.     

Oligosaccharide structures formed during the hydrolysis of lactose by Aspergillus oryzae β-galactosidase

Di-, tri-, tetra-, penta- and hexasaccharides were formed during the hydrolysis of lactose by transgalactosylation reaction of Aspergillus oryzae β-galactosidase. In this study the isolation and characterization of the major constituents of tri-, tetra- and pentasaccharides are described. The structure elucidation of 3 tri-, 2 tetra- and 1 pentasaccharides was carried out by methylation analysis, mass spectrometry and ¹³C-nmr spectrometry. The trisaccharides are $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}\text{(3′-}\text{galactosyl-lactose}\text{)}$, $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}\text{(6′-}\text{galactosyl-lactose}\text{)}$ and $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-O-[β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)]-}\text{d}\text{-}\text{glucose}\text{(4,6-}\text{digalactosyl-glucose}\text{)}$. Tetrasaccharides are $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$ and $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)}$ [or $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)]-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$. Pentasaccharide is $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$.     

Thermal conductivity of near-stoichiometric (U, Ce)C and (U, Pu, Ce)C solid solutions

The thermal conductivities of near-stoichiometric (U, Ce)C and (U, Pu, Ce)C solid solutions containing CeC up to 10 mol% were determined in the temperature range from 740 to 1600 K by the laser flash method. The thermal conductivity decreased with the cerium content in the solid solutions. The electrical resistivities were also measured for the purpose of analyzing the heat conduction mechanism. It was found that the decrease of electronic heat conduction caused by the addition of cerium resulted in decreasing the thermal conductivities of (U, Ce)C and (U, Pu, Ce)C compared with UC and (U, Pu)C.     

A quantitative analysis of a trace amount of hydrogen in high temperature heat-treated carbons

A technique to determine a trace amount of hydrogen in carbon materials heat-treated above 1000 °C was developed. Three types of carbons prepared from poly(furfulyl alcohol), poly(vinyl chloride) and mesophase carbon microbeads were heat-treated at various temperatures ranging from 1000 to 1800 °C. Then they were gasified by O₂ in a fixed bed flow reactor, and the H₂O gases formed during the gasification processes were carefully monitored with a Karl Fischer moisture analyzer. As a result, this method makes it possible to determine the hydrogen contents in the carbons down to three places of decimals as a weight percent and can detect even a trace amount of hydrogen as low as 0.002 wt.%. A possible chemical structure of carbon edge sites was also discussed based on the experimentally determined hydrogen contents.     

A Thermo-Elastic Analysis of the Parallel Surface Thrust Washer

An optical interference method was used to display the distorted film shape in nominally parallel surface thrust washers. The bearings were made of aluminium to accentuate thermal expansion and were carefully lapped flat before use. Both the experimental results and an analysis of the coupled elasticity, Reynolds and energy equations confirm that these bearings operate by the formation of a slightly converging film over the leading 80 percent (or less) of the pad. Fair agreement was obtained between the analysis and previously developed multiple regression equations. Thrust washers for industrial use with random waviness are likely lo perform better than lapped bearings.