Cooling condition dependence on ion etching rate in a softmagnetic metallic glass

Taking into consideration the knock-on cascade mechanism and the free volume theory, the cooling condition dependentR _s (ion etching rate) is investigated for a liquid-quenched Fe-10at%Si-15at%B alloy glass. A highR _s is found in a slow cooled glass.     

Cold flow model and computer simulation studies of a circulating fluidized bed reactor for the oxidative coupling of methane

A circulating fluidized bed configuration has been developed for application in the oxidative coupling process. The configuration comprises a bottom turbulent fluidized bed, wherein the oxidative coupling reaction is conducted, followed by a reduced-diameter top fast bed for catalyst entrainment and hydrocarbon cracking. The hydrodynamic characteristics of this configuration have been investigated in a pilot-plant cold flow unit. Detailed experimental results on the turbulent bed flow structure and the gas phase residence time distribution are presented and discussed. The performanceofthe proposed reactor is analyzed by computer simulation studies based on a published oxidative coupling kinetic model. It is shown that improved hydrocarbon yields can be obtained by optimizing the hydrodynamic structure and the mixing characteristics of the turbulent bed.     

The effect of pre-wetting on dynamic contact angles

A roll-coating experimental system is used to study the effect of pre-wetting on dynamic contact angles, the interfacial displacement depth, and the associated phenomenon of air entrainment. The system consists of a roll, which is horizontally rotating in a liquid pool. The dynamic contact angle is recorded by a macrophotography system. The test liquids are glycerol solutions with viscosities in the range 104 < μ < 748 mPa · s. The value of (μV/ρg)^0.5 is taken as the characteristic length to be used in the dimensionless relationships which correlate experimental measurements. The effect of base layer entry angle into the liquid pool on the dynamic contact angles and other flow parameters is studied. Comparison is made with measurements in dry tape-coating and other pre-wet roll–coating systems.     

Effect of surface boundary on neuronal magnetic stimulation

The effect of the surface boundary between free space and a conducting medium on the excitation properties of neurons by magnetic fields are analyzed. The electric field and the spatial derivative of the induced field generated by a coil mounted both parallel and perpendicular to the surface of a semi-infinite conducting medium were calculated using the method of images. An imaginary axon is located in the same relative position from the coil in both configurations and the excitation properties are compared. The calculations are expressed in terms of the activating function for the electrical stimulation of axons. The calculations indicate that the activating function for magnetic stimulation is biphasic as opposed to triphasic for electrical stimulation. The large spatial extent of the magnetically induced electric field compared to the electric field generated by point source electrode suggests a different mode of excitation for neuronal structures in the CNS. The field distribution have been verified experimentally and are important for the understanding of the mechanisms of magnetic stimulation of neural tissue.     

The oxidative inducation test applied to medical PVC and other polymers

We have examined the applicability of this simple and effective test to polymer systems widely used in the medical industry. First, it was found that not every polymer examined exhibited a distinct onset of autocatalytic oxidation detectable by DSC. However, for cases where distinct onsets are found, powerful insights can be obtained. These included activation energy of the degradation, thermal oxidative shelf life prediction, and correlation, with product performances. Actual examples are presented to illustrate the utility of the test.     

Ultra-wideband (from DC to 110 GHz) CPW to CPS transition

A new ultra-wideband, low-loss and small-size coplanar waveguide (CPW) to coplanar strip (CPS) transition which can be used from DC to 110 GHz is presented. The proposed transition connects CPW with CPS by the reformed air-bridge. Two ground planes of CPW are tied at their ends by a line and the centre of the line is connected to the ground strip of CPS by another line. Owing to the symmetry of the proposed structure, the currents of two ground planes of CPW are combined with the same phase and transferred to the ground strip of CPS. With height of 3 μm, the signal line of CPW passes over two connecting lines and is connected to the signal strip of CPS. For the back-to-back transition structure, insertion loss <1 dB and return loss >15 dB are obtained from 0.5 to 110 GHz     

Intergranular stresses in ZIRCALOY-2

The development of the understanding of the intergranular stresses in ZIRCALOY-2 is reviewed. Neutron diffraction measurements of the intergranular strains were made on rod-textured material and highly textured plate. The elastoplastic self-consistent (EPSC) model provides a sound theoretical foundation for our understanding of the behavior. The strain response of ZIRCALOY-2 to applied tensile stress is well described for two very different textures with the same slip and hardening parameters. It is almost certain that tensile twinning is the explanation for the response to compressive stress and rolling that is, as yet, incompletely understood. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

MMG measurement: a high-sensitivity microphone-based sensor forclinical use

A high-sensitivity human muscle-vibration measurement (MMG) sensor adapted to clinical use is presented. The muscle vibration phenomenon is modeled and investigated to optimize the measurement technique. The sensor uses an acoustic impedance adaptation technique to convert the skin surface vibration in terms of acoustic pressure, which is sensed by a microphone. The device is calibrated and gives the real amplitude of the vibration. It is also well fitted to measure other physiological vibrations in the 2 Hz-1 kHz range     

A new write/erase method to improve the read disturbcharacteristics based on the decay phenomena of stress leakage currentfor flash memories

This paper describes a new write/erase method for flash memory to improve the read disturb characteristics by means of drastically reducing the stress leakage current in the tunnel oxide. This new write/erase operation method is based on the newly discovered three decay characteristics of the stress leakage current. The features of the proposed write/erase method are as follows: 1) the polarity of the additional pulse after applying write/erase pulse is the same as that of the control gate voltage in the read operation; 2) the voltage of the additional pulse is higher than that of a control gate in a read operation, and lower than that of a control gate in a write operation; and 3) an additional pulse is applied to the control gate just after a completion of the write/erase operation. With the proposed write/erase method, the degradation of the read disturb life time after 10⁶ write/erase cycles can be drastically reduced by 50% in comparison with the conventional bipolarity write/erase method used for NAND type flash memory. Furthermore, the degradation can he drastically reduced by 90% in comparison with the conventional unipolarity write/erase method fur NOR-, AND-, and DINOR-type flash memory. This proposed write/erase operation method has superior potential for applications to 256 Mb flash memories and beyond     

Adaptive space-time reduced-length MMSE receiver for interferencesuppression in DS/CDMA

The authors present an adaptive space-time reduced-length minimum mean-squared error (MMSE) receiver to suppress co-channel interference in the near-far environment for an asynchronous direct-sequence code-division multiple-access (DS/CDMA) system. Simulation results show that better bit-error rate and faster and more stable convergence are achieved over the existing full- and reduced-length MMSE receivers