Colloidal silica removal in coagulation processes for wastewater reuse in a high-tech industrial park.

Four experiments of coagulation and flocculation were conducted to investigate the characteristics of colloidal silica removal in a high-tech industrial wastewater treatment plant for reclamation and reuse of the effluent. Experimental results illustrated that poly-aluminium chloride (PACl) showed higher performances on colloidal silica removal than alum. Interestingly, the two coagulants demonstrated the same capacity on silica removal. The specific silica removal capacity was approximately 0.135 mg SiO2/mg Al2O3 when the dosage of coagulants was in the range 30-150 mg/L Al2O3. In addition, the silica was reduced significantly at the condition of pH above 8. Experimental data implied that precipitation of aluminium flocs was the major mechanism for colloid silica removal in PACl and alum coagulation, besides, charge adsorption was also important for improving removal efficiency. Moreover, the addition of polyacrylic acid (PAA) as a flocculant could slightly advance silica removal in the PACl coagulation. The combined PACl/PAA/flocs coagulation was effective for the removal of colloidal silica, soluble COD, and turbidity and also suitable as a pretreatment unit in wastewater reclamation and reuse processes.     

Effects of Contaminants on Toxicity of the Lampricides TFM and Bayer 73 to Three Species of Fish

Waters in the Great Lakes basin contain more than 400 contaminant chemicals that potentially affect fishery resources, commerce, and human inhabitants. We determined in the laboratory the effects of selected contaminants on the toxicity of the widely used lampricides TFM (3-trifluoromethyl-4-nitrophenol) and Bayer 73 (2′,5-dichloro-4′-nitrosalicylanilide) to three species of fish—rainbow trout (Salmo gairdneri), white sucker (Catostomus commersoni), and fathead minnow (Pimephales promelas). The fish were exposed to paired mixtures of lampricides and selected contaminants in standardized, acute static toxicity tests to determine the resulting type of response—less than additive, additive, or greater than additive (synergistic). As expected, the toxicities of combinations of lampricides with organic pesticides, metal, industrial or municipal pollutants, and tannic acid were mostly additive. However, the toxicity of a combination of TFM, Delnav, and malathion was synergistic, and extremely small quantities of each chemical became lethal when mixed. The concentration that produced 50% mortality was 1.64 mg/L for TFM alone but only 0.041 mg/L for TFM with the pesticides. Toxicities of the pesticides in the combination also increased commensurately. The triple combination of chemicals produced extraordinary synergism and effectively demonstrated the hazards that may result if certain chemical combinations occur in the aquatic environment. However, synergism is not the only kind of toxic action that produces hazards to aquatic organisms. All three types of toxic action are of concern because toxic units produced by contaminant chemicals add to the toxic units of applied management chemicals. Since the toxicity of the majority of chemical combinations is simply additive, this cumulative toxic action contributes more total units to aquatic environments than the extreme actions of less than additive and synergism. The toxicity of the lampricide TFM, as well as other management chemicals, is reinforced by the presence of any contaminant that contributes additional units of toxicity. Therefore, all types of cumulative toxic action should be of concern to people and agencies involved with protecting the environment.     

A Graphene Field-Effect Device

In this letter, a top-gated field-effect device (FED) manufactured from monolayer graphene is investigated. Except for graphene deposition, a conventional top-down CMOS-compatible process flow is applied. Carrier mobilities in graphene pseudo-MOS structures are compared to those obtained from the top-gated Graphene-FEDs. The extracted values exceed the universal mobility of silicon and silicon-on-insulator MOSFETs     

A new technique for robust control of servo systems

The robust controller has very simple structures and can be divided into two separate parts: a servo controller and an auxiliary controller. The two controllers are designed independently. The function of the auxiliary controller is to cancel out the plant uncertainties directly without the use of the high loop gain principle. Interpretation of robot controller as a signal-synthesis adaptive controller is given. Practical implementation issues of the auxiliary controller are discussed. Simulations of a design example with large parameter uncertainty, nonlinearity, and external disturbance are presented to demonstrate the effectiveness of the design technique. This technique is further tested with success in an experimental study of joint position control of a PUMA 560 robot arm     

An evaluation of the quantum efficiency of optical heterodyne detectors

Measurements are presented which verify the previous theoretical analysis of photomixers. A review of the theory is presented and theoretical predictions of the performance of a device are made. The measurements on the device are discussed and compared to the theory.     

Comment on "Exceptions to Hick's law: Explorations with a response duration measure" (Longstreth, El-Zahhar, & Alcorn, 1985).

Longstreth, El-Zahhar, and Alcorn's (1985) rejection of Hick's law is critically examined and alternative explanations of the available data are considered. An elaboration of Hick's law to include task-dependent search strategies seems able to account for a broader range of data than the Longstreth et al. model. Further study the determinants of such stategies would be useful. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Visualization of the entire surface of a protein by cartographic projection

A minicomputer based system for the determination and schematic representation of protein surfaces is described. The algorithms are based on the atomic coordinates of globular protein molecules of the Brookhaven Protein Data Bank. Using a cartographic projection a normalized graphic representation is obtained of the amino acid residues located on the surface of the considered protein. The programs are written in FORTRAN IV (surface determination) and BASIC (graphic representation).     

The effect of the textile industry dye bath additive EDTMPA on colour removal characteristics by ozone oxidation.

In this study, the effects of the phosphonic acid based sequestering agent EDTMPA used in the textile dye baths on colour and organic matter removal by ozone oxidation was experimentally investigated. Procion Navy HEXL dyestuff that has been commonly used for the reactive dyeing of cellulose fibers was selected as the model component. The organic matter oxidation by ozone was determined to obey the pseudo-first order kinetics as they are treated singly or in combination. COD removal rates obtained from pseudo-first order reaction kinetics showed that oxidation of Navy HEXL alone (0.0947 L/min) was faster than that of EDTMPA (0.0171 L/min) and EDTMPA with dye (0.0155 L/min) at pH 3.0. It was also found that reaction rates of single EDTMPA removal and EDTMPA and dye mixture removal increased as the reaction pH was increased from 3.0 to 10.5.