Manipulation of microenvironment with a built-in electrochemical actuator in proximity of a dissolved oxygen microsensor

Biochemical sensors for continuous monitoring require dependable periodic self diagnosis with acceptable simplicity to check its functionality during operation. An in-situ self-diagnostic technique for a dissolved oxygen microsensor is proposed in an effort to devise an intelligent microsensor system with an integrated electrochemical actuation electrode. With a built-in platinum microelectrode that surrounds the microsensor, two kinds of microenvironments, called the oxygen-saturated or oxygen-depleted phases, can be created by water electrolysis, depending on the polarity. The functionality of the microsensor can be checked during these microenvironment phases. The polarographic oxygen microsensor is fabricated on a flexible polyimide substrate (Kapton) and the feasibility of the proposed concept is demonstrated in a physiological solution. The sensor responds properly during the oxygen-generating and oxygen-depleting phases. The use of these microenvironments for in-situ self-calibration is discussed to achieve functional integration, as well as structural integration, of the microsensor system.     

Neutron Stress Measurement of W‐Fiber Reinforced Cu Composite

Stress measurement methods using neutron and X‐ray diffraction were examined by comparing the surface stresses with internal stresses in the continuous tungsten‐fiber reinforced copper‐matrix composite. Surface stresses were measured by X‐ray stress measurement with the sin²ψ method. Furthermore, the sin²ψ method and the most common triaxal measurement method using Hooke's equation were employed for internal stress measurement by neutron diffraction. On the other hand, microstress distributions developed by the difference in the thermal expansion coefficients between these two phases were calculated by FEM. The weighted average strains and stresses were compared with the experimental results. The FEM results agreed with the experimental results qualitatively and confirmed the importance of the triaxial stress analysis in the neutron stress measurement.     

Properties of feedback solitons in a single-mirror experiment

We report on the observation of localized states (LSs) in a single-mirror feedback system using sodium vapor as the nonlinear medium. By combining experimental results with simulations based on a microscopic model and with results of a linear stability analysis of the homogeneous state, we discuss the properties of the LSs, the mechanism of their formation, their domain of existence in parameter space, their interaction with the amplitude and phase gradient in the Gaussian beam of the driving laser, and the formation of "molecules" and "clusters" of LSs. We elucidate the dominant role of diffraction in the interaction of the LSs and discuss relations between the clusters of LSs and extended patterns.     

Visualizing the structure of Web communities based on data acquired from a search engine

Discovery of Web communities, groups of Web pages sharing common interests, is important for assisting users' information retrieval from the Web. This paper describes a method for visualizing Web communities and their internal structures. visualization of Web communities in the form of graphs enables users to access related pages easily, and it often reflects the characteristics of the Web communities. Since related Web pages are often co-referred from the same Web page, the number of co-occurrences of references in a search engine is used for measuring the relation among pages. Two URLs are given to a search engine as keywords, and the value of the number of pages searched from both URLs divided by the number of pages searched from either URL, which is called the Jaccard coefficient, is calculated as the criteria for evaluating the relation between the two URLs. The value is used for determining the length of an edge in a graph so that vertices of related pages will be located close to each other. Our visualization system based on the method succeeds in clarifying various genres of Web communities, although the system does not interpret the contents of the pages. The method of calculating the Jaccard coefficient is easily processed by computer systems, and it is suitable for visualization using the data acquired from a search engine.     

Characteristics of estrogen decomposition by ozonation.

Since the natural estrogens 17 beta-estradiol (E2) and estron (E1), and the synthetic estrogen 17 alpha-ethynyl estradiol (EE2) have strong endocrine disrupting effects and the tendency to persist in effluent from wastewater treatment plants, effective measures are needed to remove them from wastewater. In this research, to gain an understanding of the characteristics of estrogen decomposition by ozonation, experiments were conducted using effluent from an actual wastewater treatment plant. In this experiment, estrogen was added to effluent at a concentration of 200 ng/l and 20 ng/l before the ozonation experiments. The results showed 90% or more of estrogen concentration and estrogenic activity of E2, El and EE2 to be removed at an ozone dose of 1 mg/l. At an ozone dose of 3 mg/l, the estrogen concentration and estrogenic activity of E2, El and EE2 in the treated water fell below the detection limit. The removal rate was not influenced by the kind of estrogen. No generation of byproducts with estrogenic activity was observed. The authors conclude that estrogen in secondary treated wastewater can be almost entirely removed at the practical ozone dose rate applied for the purpose of disinfection, which is up to about 5 mg/l.     

Algorithmic mechanism design for load balancing in distributed systems

Computational grids are promising next-generation computing platforms for large-scale problems in science and engineering. Grids are large-scale computing systems composed of geographically distributed resources (computers, storage etc.) owned by self interested agents or organizations. These agents may manipulate the resource allocation algorithm in their own benefit, and their selfish behavior may lead to severe performance degradation and poor efficiency. In this paper, we investigate the problem of designing protocols for resource allocation involving selfish agents. Solving this kind of problems is the object of mechanism design theory. Using this theory, we design a truthful mechanism for solving the static load balancing problem in heterogeneous distributed systems. We prove that using the optimal allocation algorithm the output function admits a truthful payment scheme satisfying voluntary participation. We derive a protocol that implements our mechanism and present experiments to show its effectiveness.     

High voltage (>1kV) and high current gain (32) 4H-SiC power BJTs using Al-free ohmic contact to the base

This letter reports the design and fabrication of 4H-SiC bipolar junction transistors with both high voltage (>1kV) and high dc current gain (/spl beta/=32) at a collector current level of I/sub c/=3.83A (J/sub c/=319 A/cm/sup 2/). An Al-free base ohmic contact has been used which, when compared with BJTs fabricated with Al-based base contact, shows clearly improved blocking voltage. A specific on-resistance of 17 m/spl Omega//spl middot/cm/sup 2/ has been achieved for collector current densities up to 289 A/cm/sup 2/.     

Design of radiation-emission measurements of an air-traffic surveillance radar

The current work presents the procedure of designing and carrying out measurements of radiation emission from an air-traffic surveillance radar. The system requirements are first given, and then the equipment used is described. The steps to determine the operating characteristics of the radar are specified in detail. The necessary methods for manual power measurements and calculations are next explained. Since the final measurement system was fully automated, its main features (topology, protocol of operation) are also given. Finally, some measurement results taken during the initial phase of system operation are presented and discussed.     

Kinetic genesis of some statistic regularities of fracture

The statistics of strength and longevity of solids has been the subject of investigation for many years. Some common regularities in fracture statistics have been experimentally revealed. These are Jhurkov's exponential and power-type longevity equations, Weibull's statistics of strength, and different types of size effect. However, the present notions on the nature of the observed statistic regularities are far from being complete. Here the object is to examine fracture statistics on the basis of a previously suggested kinetic approach. We consider the evolution of the statistical ensemble of cracks under static and steady-rate loading of a solid. The growth of an individual crack is therewith treated as a spasmodic stochastic process and presented by a time-dependent distribution density of a crack size. That function is used to construct the conditional longevity distribution with respect to the growth of an individual crack with the prescribed initial size. The final longevity distribution is found as the distribution of a minimum of conditional longevities. That procedure has been realized for both brittle and quasi-brittle cases. The obtained longevity and strength distributions were found to be in qualitative agreement with the observed statistic regularities. However, the conventional `weak link concept' and proposals for the statistics of dangerous defects are in conflict with the obtained results. It is moreover shown that, within the limits of the wide-spread concept, Jhurkov's longevity equation and Weibull's statistics of strength are mutually exclusive. Although the results were obtained from simple models, there is a good probability of kinetic origin for the basic statistic regularities of fracture.