Properties and structure of welded joints of high-strength steel after zonal heat treatment by electron beam

Conclusion Zonal electron-beam heat treatment in vacuum of welded joints of high-strength steel, produced by electron-beam welding, brings about a troostomartensitic and a martensitic-sorbitic structure in the welded joint and equalization of the properties over the section of the welded joint: impact toughness of the welding seam and of the weld-affected zone is practically the same, viz., 30 J/m².Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 7–8, March, 1991.     

Assessment of response function in two PET scanners with and without interplane septa

The authors have assessed the response function both experimentally and theoretically for two commercial tomographs: CTI 931/08-12 and CTI 953B with and without interplane septa. Monte Carlo simulations were undertaken using the GEANT package from CERN. Spatial resolution (tomographic and axial) was calculated for line sources at various positions in the field of view. Sensitivity and scatter fraction (SF) were calculated for various source geometries as a function of energy discrimination. A very realistic response function in positron emission tomography (PET) is obtained by Monte Carlo methods, using global parameters to account for unsimulated phenomena such as scintillation light transport inside a detector block and its sharing among the various phototubes. Minor discrepancies remain for sensitivity and SF at high energy thresholds and may probably be explained by introducing the observed dispersion in the energy response for the various crystals within a detector block.     

Noise equivalent count measurements in a neuro-PET scanner with retractable septa

The noise-equivalent count-rate (NEC) performance of a neuro-positron emission tomography (PET) scanner has been determined with and without interplane septa on uniform cylindrical phantoms of differing radii and in human studies to assess the optimum count rate conditions that realize the maximum gain. In the brain, the effective gain in NEC performance for three-dimensions (3-D) ranges from >5 at low count rates to approximately 3.3 at 200 kcps (equivalent to 37 kcps in 2-D). The gains of the 3-D method assessed by this analysis are significant, and are shown to be highly dependent on count rate and object dimensions.     

Preparation and clinical trial of new dried balanced food products "Unipit" for total restorative nutrition]

Designs of 2 types of dried balanced food mixtures ("Unipit-1" and "Unipit-2") intended for complete recovery nutrition of patients with retained and disordered digestive function have been validated. The chemical composition of these products has been presented. The results of clinical trials have proved the high therapeutic effectiveness of "Unipit-1" and "Unipit-2" in rehabilitation of neurosurgical patients.     

Cation interdiffusion between thick film of YBa2Cu3O7-δ and ceramic substrate

Thick films of superconducting oxides, YBa₂Cu₃O_7-, were successfully made by conventional screen-printing technology on Al₂O₃, MgO, and ZrO₂ substrates. Interdiffusion between the superconductive film and substrate was investigated using analytical electron microscopy. The results indicate that MgO and ZrO₂ are superior to Al₂O₃ for substrate materials.     

Synthesis of polycrystalline alumina fibre with aluminium chelate precursor

Polycrystalline alumina fibre was successfully synthesized by pyrolysis of preceramic fibre formed from aluminium chelate compound. Ethyl 3-oxobutanoatodiisopropoxyaluminium (EOPA) was reacted with glacial acetic acid yielding a polymeric product. The absorption bands ascribed to Al-O from 630–705 cm^–1 changed from a sharp to a broad band on treatment with acetic acid. The¹³CNMR spectrum of EOPA changed from sharp singlets to multiplets after the reaction with acetic acid. The viscosity of the polymeric product increased in intensity with increasing amount of acetic acid. The viscosity of the polymeric product formed from EOPA-30 mol % acetic acid was 450 Pa s at 30 °C, and decreased to 5.4 Pa s with increasing measurement temperature from 30–70 °C. The²⁷Al resonance at 35 p.p.m. increased in intensity with increasing viscosity of the polymeric precursor. The molecular weight of the precursor was distributed from 400–800. The polymeric precursor pyrolysed at 500 °C in air was amorphous to X-rays, and crystallized in -alumina at 840 °C. The precursor fibres were pyrolysed, to yield fine-grained fibres of -alumina, at 1300 °C for 1 h.     

The formation of β′-sialon from a montmorillonite-polyacrylonitrile composite by carbothermal reduction: an NMR,TGA, XRD and EM study

The products of carbothermal reduction in N₂ of a nanocomposite between dodecylammonium-exchanged montmorillonite and polyacrylonitrile (PAN) have been studied by solid-state ²⁷Al and ²⁹SiNMR spectroscopy, X-ray diffraction, transmission electron microscopy and thermogravimetry. Comparison with analogous reactions involving sodium-exchanged montmorillonite and dodecylammonium-exchanged montmorillonite (without PAN) shows that in the presence of PAN, the formation of silica, cordierite or mullite is almost completely suppressed. The only crystalline phase detected between 1000 and 1300 °C was a -sialon, having a much higher SiAl ratio (7.051) than that of the precursor clay (2.441). Reduction of the octahedral AlO₆ begins near 1200 °C, forming increasing amounts of Al(N,O)₄ tetrahedra with temperature, so that by 1600 °C, complete reduction to AlN₄ (i.e. bulk AlN) has occurred. In contrast, reduction of the tetrahedral SiO₄ is appreciable at 1100 °C, and is almost complete (SiN₄ tetrahedra only) by 1200 °C. No intermediate Si(N,0)₄ environments are found. By 1600 °C, only the SiC₄ environment (i.e. bulk SiC) remains. A mechanism is suggested, involving the formation of alternating slabs of an amorphous aluminosilicate and carbon at 1000 °C, followed by diffusion of silicon from the outer regions of the aluminosilicate band towards the centre, and sequential reduction of Si(OSi)₄ and Si(OSi)₃ (OAl) groups.     

Structure of nickel-doped α-FeOOH

Colloidal particles of nickel-doped-FeOOH prepared under varied conditions were characterized using transmission electron microscopy, X-ray diffraction thermogravimetry-differential thermal analysis, Fourier transform infrared analysis, inductively coupled plasma spectroscopy and nitrogen adsorption. The unit cell dimensions of the resulting-FeOOH slightly changed on doping with nickel. Both the total and surface hydroxyl ions decreased with increasing amounts of nickel. The nickel content in the surface layer determined by X-ray photoelectron spectroscopy was larger than the total nickel content determined by inductively coupled plasma spectroscopy. The results obtained indicate that the substitution of iron with nickel took place in the surface layer more than in the internal phase.