Generation of chromosome fragment specific bovine DNA sequences by microdissection and DOP-PCR

Trends in causative organisms and sources of infection were studied in a series of 288 episodes of bacteremia in neutropenic cancer patients observed in a single institution from 1986 to 1993. The incidence of bacteremia increased significantly from 20 episodes per 1000 admissions in 1986 to 50 episodes per 1000 admissions in 1993 (p = 0.00001). Over the study period, a continuous increment in gram-positive bacteremia, which reached 81% of episodes in 1993 (p = 0.000001), was observed. Conversely, the incidence of gram-negative bacteremia remained stable. Coagulase-negative staphylococci and viridans group streptococci were the most commonly isolated pathogens. Bacteremia caused by coagulase-negative staphylococci increased from 3 episodes per 1000 admissions to 19 episodes per 1000 admissions (p = 0.0001), and viridans group streptococci bacteremia increased from 0 episodes per 1000 admissions to 19 episodes per 1000 admissions (p = 0.000001). The upward trend in gram-positive bacteremia appeared to be related to a significant increase in both intravascular catheters (p = 0.003) and oral mucositis (p = 0.003) as sources of infection. Specific strategies to prevent chemotherapy-induced mucositis and catheter-related bacteremia merit further investigations.     

Transmit permission control on spread ALOHA packets in LEOsatellite systems

A transmit permission control method for improving the throughput characteristics of a low Earth orbit (LEO) satellite communication system employing spread-slotted ALOHA multiple-access scheme is proposed. Both nonfading and fading satellite links are considered. The basic idea of the proposed scheme is to decrease the level of interference at each satellite and, hence, to increase the probability of packet success, by prohibiting the packet transmission from the users with relatively high propagation loss to their connecting satellites. It is shown that the method has the ability to improve the throughput performance in heavy traffic loads and the peak value of the throughput, significantly. It is also shown that the average delay performance of the system employing the proposed scheme is superior to that of the conventional system at heavy traffic loads     

The master curve and the constitutive equation for creep deformation and fracture for Cr-Mo-V steel throughout smooth,notched and precracked specimens

It has been shown experimentally that the master curve for creep deformation versus the ratio of time to fracture time, can be obtained for smooth, notched and precracked specimens of Cr-Mo-V steel, a high-temperature ductile material. A simple unified constitutive equation, i.e. a master curve equation, has been proposed. It is suggested that there is some correlation between the creep deformation fracture curve and the creep damage size master curve. Although the range of the applicability of methodology might be rather limited, the development of this concept is needed for improved long-term creep lives and for other creep ductile materials.     

KGa-priderite and related compound for the selective reduction of nitrogen monoxide with propylene

The catalytic activity of KGa-priderite, K_1.6Ga_1.6Ti_6.4O₁₆, and its related compound KGa₈Ga₉Ti₁₅O₅₆ was investigated for the selective reduction of nitrogen monoxide (NO) with propylene (C₃H₆) in the presence of high oxygen concentrations. The KGa-priderite showed significant activity during this reaction, but the related compound showed only a little activity. These compounds are quite different from the conventional catalysts for NO_x selective reduction and are characterized by the fact that their properties are free from the effects of solid acidity and support metals. This difference was attributable to the NO desorption rate at the surface of these compounds. It has become clear that the KGa-priderite catalyst remarkably adsorbed NO, and it is suggested that the amount of NO adsorbed and the amount of catalytic activity are able to be increased by the design of priderite structure.     

Structure and mechanical properties of polyethylene-fullerene composites

The microhardness of films of fullerene-polyethylene composites prepared by gelation from semidilute solution, using ultrahigh molecular weight polyethylene (PE) (6×10⁶), has been determined. The composite materials were characterized by optical microscopy and X-ray diffraction techniques. The microhardness of the films is shown to increase notably with the concentration of fullerene particles within the films. In addition, a substantial hardening of the composites is obtained after annealing the materials at high temperatures (T _a=130 °C) and long annealing times (t _a=10⁵s). The hardening of the composites with annealing temperature has been identified with the thickening of the PE crystalline lamellae. Comparison of X-ray scattering data and the microhardness values upon annealing leads to the conclusion of phase separation of C₆₀ molecules from the polyethylene crystals within the material. The temperature dependence is discussed in terms of the independent contribution of the PE matrix of the C₆₀ aggregates to the hardness value.     

The use of force modulation microscopy to investigate block copolymer morphology

Force modulation microscopy (FMM) is used to characterize the external surface and internal fracture surface morphologies of three different block copolymer samples. A roll-cast poly(styrene-butadiene-styrene) triblock copolymer film, spin-coated poly(styrene-b-methyl methacrylate) thin films, and an ultrathin poly(styrene-b-hexyl isocyanate) rod-coil block copolymer film were investigated. For each sample, height and elasticity images were obtained for the same areas allowing direct comparison. The elasticity images obtained using force modulation microscopy were independent of surface roughness and found to exhibit better contrast and spatial resolution of the respective block copolymer domains than the height images. The lateral resolution of the elasticity images was sufficient to show microphase separated domains having length scales as small as about 10 nm. The poly(styrene-b-methyl methacrylate) samples demonstrate that FMM can even be successfully used to study block copolymers in which both blocks are glassy under the conditions of measurement.     

Analysis of composite laminates with transverse cracks

The analysis of the behaviour of composite laminates with general balanced lay-up sequences and containing distributed transverse cracks is discussed and demonstrated in this paper. It is shown that a constitutive model of damage for composites, which has been successfully used to analyse the effects of uniformly distributed transverse cracks in cross-ply laminates, can be readily extended to the analysis of uniformly distributed transverse cracks in more general symmetric laminates. The further extension of the theory to non-uniformly distributed damage can be achieved by finite element analysis. It is shown that the finite element implementation of the theory is particularly simple since the contribution of the damage to the overall behaviour can be incorporated into the force vectors.     

On the J-integral in periodically layered composites

When a heterogeneous elastic material is represented by an effective homogeneous elastic solid, average stress and strain fields are used. The meaning of the J-integral in the effective homogeneous solid is investigated. A periodically layered medium is considered. The relation between the J-integrals in the original layered medium and the effective medium is derived.     

P-MOSFET's with ultra-shallow solid-phase-diffused drain structureproduced by diffusion from BSG gate-sidewall

A p-MOSFET structure with solid-phase diffused drain (SPDD) is proposed for future 0.1-μm and sub-0.1-μm devices. Highly doped ultrashallow p⁺ source and drain junctions have been obtained by solid-phase diffusion from a highly doped borosilicate glass (BSG) sidewall. The resulting shallow, high-concentration drain profile significantly improves short channel effects without increasing parasitic resistance. At the same time, an in situ highly-boron-doped LPCVD polysilicon gate is introduced to prevent the transconductance degradation which arises in ultrasmall p-MOSFETs with lower process temperature as a result of depletion formation in the p⁺-polysilicon gate. Excellent electrical characteristics and good hot-carrier reliability are achieved