Considerations for linking seatpan and backrest angles

Modern ergonomic chairs typically have several dimensions that can be adjusted independently of one another. Finding a desirable setting for any one dimension can depend on how other dimensions are set, thereby confronting users with a significant control problem. One design strategy for dealing with this problem has been to link changes in seatpan and backrest angles in some ratio, such that a one‐degree change in seatpan angle is associated with a two‐ or three‐degree change in backrest angle. However, there is no evidence to justify the choice of a particular ratio. This article presents data that addresses this issue. Subjects, performing either an entry or verification task, could adjust the chair to any position. Backrest and seatpan angles were plotted over time and analyzed using both graphical and statistical methods. The resulting scatter plots do not support the industry standard, 1:2 or 1:3 ratio, of changes in seatpan to backrest angles. The possibility of a variable linkage is discussed; however, problems associated with such a solution raise the possibility that control issues might be best addressed through training and exploration.     

确保管道运输的泄漏检测技术

保证所有管道中石油从一端流向另一端不泄漏要比它的探测更加困难。比较图中的3个系统,可以看到这项技术在40多年来是如何逐步发展的。     

Stabilization of symmetric formations to motion around convex loops

We provide a cooperative control algorithm to stabilize symmetric formations to motion around closed curves suitable for mobile sensor networks. This work extends previous results for stabilization of symmetric circular formations. We study a planar particle model with decentralized steering control subject to limited communication. Because of their unique spectral properties, the Laplacian matrices of circulant graphs play a key role. We illustrate the result for a skewed superellipse, which is a type of curve that includes circles, ellipses, and rounded parallelograms.     

Mobile wireless network system simulation

This paper describes an advanced simulation environment which is used to examine, validate, and predict the performance of mobile wireless network systems. This simulation environment overcomes many of the limitations found with analytical models, experimentation, and other commercial network simulators available on the market today. We identify a set of components which make up mobile wireless systems and describe a set of flexible modules which can be used to model the various components and their integration. These models are developed using the Maisie simulation language. By modeling the various components and their integration, this simulation environment is able to accurately predict the performance bottlenecks of a multimedia wireless network system being developed at UCLA, determine the trade-off point between the various bottlenecks, and provide performance measurements and validation of algorithms which are not possible through experimentation and too complex for analysis.This work was supported in part by the Advanced Research Projects Agency, ARPA/CSTO, under Contract J-FBI-93-112 Computer Aided Design of High Performance Wireless Networked Systems, and by ARPA/CSTO under Contract DABT-63-94-C-0080 TransparentVirtual Mobile Environment.This paper was in part presented at the ACM Mobile Computing and Networking Conference (Mobicom '95), Berkeley, California, 14–15 November 1995.     

Inorganic-Based Printed Thermoelectric Materials and Devices

One of the simplest ways to generate electric power from waste heat is thermoelectric (TE) energy conversion. So far, most of the research on thermoelectrics has focused on inorganic bulk TE materials and their device applications. However, high production costs per power output and limited shape conformity hinder applications of state-of-the-art thermoelectric devices (TEDs). In recent years, printed thermoelectrics has emerged as an exciting pathway for their potential in the production of low-cost shape-conformable TEDs. Although several inorganic bulk TE materials with high performance are successfully developed, achieving high performance in inorganic-based printed TE materials is still a challenge. Nevertheless, significant progress has been made in printed thermoelectrics in recent years. In this review article, it is started with an introduction signifying the importance of printed thermoelectrics followed by a discussion of theoretical concepts of thermoelectricity, from fundamental transport phenomena to device efficiency. Afterward, the general process of inorganic TE ink formulation is summarized, and the current development of the inorganic and hybrid inks with the mention of their TE properties and their influencing factors is elaborated. In the end, TEDs with different architecture and geometries are highlighted by documenting their performance and fabrication techniques.     

Ultralow Expansion Glass as Material for Advanced Micromechanical Systems

Ultralow expansion (ULE) glasses are of special interest for temperature stabilized systems for example in precision metrology. Nowadays, ULE materials are mainly used in macroscopic and less in micromechanical systems. Reasons for this are a lack of technologies for parallel fabricating high-quality released microstructures with a high accuracy. As a result, there is a high demand in transferring these materials into miniaturized application examples, realistic system modeling, and the investigation of microscopic material properties. Herein, a technological base for fabricating released micromechanical structures and systems with a structure height above 100 μm in ULE 7972 glass is established. Herein, the main fabrication parameters that are important for the system design and contribute thus to the introduction of titanium silicate as material for glass-based micromechanical systems are discussed. To study the mechanical properties in combination with respective simulation models, microcantilevers are used as basic mechanical elements to evaluate technological parameters and other impact factors. The implemented models allow to predict the micromechanical system properties with a deviation of only ±5% and can thus effectively support the micromechanical system design in an early stage of development.     

Force and tactile feedback in preloaded cantilever snap-fits under manual assembly

The purpose of this study was to investigate the tactile feedback of snap-fit fasteners when used in manual assembly. An important aspect of this assembly process is the assembler’s ability to perceive the snap-fit’s engagement. This sensing of engagement yields a high level of confidence that assembly is both complete and secure. Force and tactile feedback are critical elements in this process. Many snap-fits are used in conjunction with sealing elements that produce a constant force that remains in effect after snap-fit assembly is completed. The effect of sealing element preload magnitude and stiffness was studied using a test station, force deflection measurements, and jury pool data. A low value of preload with low stiffness was determined to be most favorable in terms of force and tactile feedback, with no preload only slightly less favorable. In order to sense the engagement signal of the catch, some resistance to assembly was found to be beneficial. A dimensionless term called “engagement signal-to-hold-force ratio” is proposed as an additional way of rating the effect of assembly forces for snap-fits. It was found that higher signal-to-hold-force ratio, as well as higher values of engagement signal, corresponded to higher confidence of assembly among experimental subjects.

Relevance to Industry

In the automotive industry, force and tactile feedback are essential for sensing the full engagement of snap-fit parts during the assembly of critical components, such as electrical and fuel system interconnects. Both the design of the snap-fit and the presence or absence of preload will affect force and tactile feedback. Many of these applications require the compression of an elastic gasket with a preload needed for air, fuel, or electrical isolation. Preload and preload stiffness factors are examined in this paper with the aim of achieving a better understanding of these effects so that snap-fit confidence of assembly and assembly robustness can be enhanced in industrial settings.     

Efficient peerGroup management in JXTA-Overlay P2P system for developing groupware tools

With the fast development of IT technologies, virtual organizations are more and more present in the current collaborative work and learning activity. For instance, many subjects in virtual distance learning are organized as online groups of students, who use groupware tools to complete their learning tasks. In this paper, we address the efficient management of peer groups in JXTA-based P2P systems as a key issue in many P2P applications that use peer group as a unit such as for remote execution of tasks in parallel and distributed applications. From this perspective, we consider peer grouping as the basis in the development of groupware tools in P2P systems.