Hand-adaptive user interface: improved gestural interaction in virtual reality

Most interactive user interfaces (UIs) for virtual reality (VR) applications are based on the traditional eye-centred UI design principle, which primarily considers the user’s visual searching efficiency and comfort, but the hand operation performance and ergonomics are relatively less considered. As a result, the hand interaction in VR is often criticized as being less efficient and precise. In this paper, the user’s arm movement features, such as the choice of the hand being used and hand interaction position, are hypothesized to influence the interaction results derived from a VR study. To verify this, we conducted a free hand target selection experiment with 24 participants. The results showed that (a) the hand choice had a significant effect on the target selection results: for a left hand interaction, the targets located in spaces to the left were selected more efficiently and accurately than those in spaces to the right; however, in a right hand interaction, the result was reversed, and (b) the free hand interactions at lower positions were more efficient and accurate than those at higher positions. Based on the above findings, this paper proposes a hand-adaptive UI technique to improve free hand interaction performance in VR. A comprehensive comparison between the hand-adaptive UI and traditional eye-centred UI was also conducted. It was shown that the hand-adaptive UI resulted in a higher interaction efficiency and a lower physical exertion and perceived task difficulty than the traditional UI.

     

Effect of different surface treatments on polypropylene composites reinforced with yerba mate fibers: Physical,mechanical, chemical,and morphological properties

This study presents the preparation of post-consumer polypropylene (r-PP) composites filled with 30 wt% yerba mate (YM) stick particles. To improve the fiber–matrix adhesion, three surface treatments were performed: alkaline treatment with sodium hydroxide (NaOH) and use of 3-aminopropyltriethoxysilane (APTS) and maleic anhydride graft polypropylene copolymer (PP-g-MA) as coupling agents. Mechanical properties including tensile, flexural, and impact resistance were determined, and chemical (Fourier transform infrared spectroscopy [FTIR]), physical (water absorption), and morphological analyses were performed. The main findings show that the treatments were efficient in improving the mechanical properties of the composites, with emphasis on the r-PP/YM30/APTS and r-PP/YM30/PP-g-MA composites, which proved to be superior in tensile, flexion and impact strength and absorption of water compared to the untreated composite. The morphological analysis showed a better interaction between the fiber and the polymeric matrix for the composites with YM/APTS and YM/PP-g-MA, which corroborates the results of tensile and flexural strength, as well as with the spectra of FTIR in which the chemical modification of the fibers is observed. However, the results show that these treatments are promising in obtaining composites with recycled matrix with better properties.     

Suspension system performance optimization with discrete design variables

Suspension systems on commercial vehicles have become an important feature meeting the requirements from costumers and legislation. The performance of the suspension system is often limited by available catalogue components. Additionally the suspension performance is restricted by the travel speed which highly influences the ride comfort. In this article a suspension system for an articulated dump truck is optimized in sense of reducing elapsed time for two specified duty cycles without violating a certain comfort threshold level. The comfort threshold level is here defined as a whole-body vibration level calculated by ISO 2631-1. A three-dimensional multibody dynamics simulation model is applied to evaluate the suspension performance. A non-gradient optimization routine is used to find the best possible combination of continuous and discrete design variables including the optimum operational speed without violating a set of side constraints. The result shows that the comfort level converges to the comfort threshold level. Thus it is shown that the operational speed and hence the operator input influences the ride comfort level. Three catalogue components are identified by the optimization routine together with a set of continuous design variables and two operational speeds one for each load case. Thus the work demonstrates handling of human factors in optimization of a mechanical system with discrete and continuous design variables.     

Combining MODIS and Landsat imagery to estimate and map boreal forest cover loss

Estimation of forest cover change is important for boreal forests, one of the most extensive forested biomes, due to its unique role in global timber stock, carbon sequestration and deposition, and high vulnerability to the effects of global climate change. We used time-series data from the MODerate Resolution Imaging Spectroradiometer (MODIS) to produce annual forest cover loss hotspot maps. These maps were used to assign all blocks (18.5 by 18.5 km) partitioning the boreal biome into strata of high, medium and low likelihood of forest cover loss. A stratified random sample of 118 blocks was interpreted for forest cover and forest cover loss using high spatial resolution Landsat imagery from 2000 and 2005. Area of forest cover gross loss from 2000 to 2005 within the boreal biome is estimated to be 1.63% (standard error 0.10%) of the total biome area, and represents a 4.02% reduction in year 2000 forest cover. The proportion of identified forest cover loss relative to regional forest area is much higher in North America than in Eurasia (5.63% to 3.00%). Of the total forest cover loss identified, 58.9% is attributable to wildfires. The MODIS pan-boreal change hotspot estimates reveal significant increases in forest cover loss due to wildfires in 2002 and 2003, with 2003 being the peak year of loss within the 5-year study period. Overall, the precision of the aggregate forest cover loss estimates derived from the Landsat data and the value of the MODIS-derived map displaying the spatial and temporal patterns of forest loss demonstrate the efficacy of this protocol for operational, cost-effective, and timely biome-wide monitoring of gross forest cover loss.     

Evaluating the species energy relationship with the newest measures of ecosystem energy: NDVI versus MODIS primary production

Ecosystem energy has been shown to be a strong correlate with biological diversity at continental scales. Early efforts to characterize this association used the normalized difference vegetation index (NDVI) to represent ecosystem energy. While this spectral vegetation index covaries with measures of ecosystem energy such as net primary production, the covariation is known to degrade in areas of very low vegetation or in areas of dense forest. Two of the new vegetation products from the MODIS sensor, derived by integrating spectral reflectance, climate data, and land cover, are thought to better approximate primary productivity than NDVI. In this study, we determine if the new MODIS derived measures of primary production, gross primary productivity (GPP) and net primary productivity (NPP) better explain variation in bird richness than historically used NDVI. Moreover, we evaluate if the two productivity measures covary more strongly with bird diversity in those vegetation conditions where limitations of NDVI are well recognized.Biodiversity was represented as native landbird species richness derived from the North American Breeding Bird Survey. Analyses included correlation analyses among predictor variables, and univariate regression analyses between each predictor variable and bird species richness. Analyses were done at two levels: for all BBS routes across natural landscapes in North America; and for routes in 10 vegetation classes stratified by vegetated cover along a gradient from bare ground to herbaceous cover to tree cover. We found that NDVI, GPP and NPP were highly correlated and explained similar variation in bird species richness when analyzed for all samples across North America. However, when samples were stratified by vegetated cover, strength of correlation between NDVI and both productivity measures was low for samples with bare ground and for dense forest. The NDVI also explained substantially less variation in bird species richness than the primary production in areas with more bare ground and in areas of dense forest. We conclude that MODIS productivity measures have higher utility in studies of the relationship of species richness and productivity and that MODIS GPP and NPP improve on NDVI, especially for studies with large variation in vegetated cover and density.     

VISIM: Sequential simulation for linear inverse problems

Linear inverse Gaussian problems are traditionally solved using least squares-based inversion. The center of the posterior Gaussian probability distribution is often chosen as the solution to such problems, while the solution is in fact the posterior Gaussian probability distribution itself. We present an algorithm, based on direct sequential simulation, which can be used to efficiently draw samples of the posterior probability distribution for linear inverse problems. There is no Gaussian restriction on the distribution in the model parameter space, as inherent in traditional least squares-based algorithms.As data for linear inverse problems can be seen as weighed linear averages over some volume, block kriging can be used to perform both estimation (i.e. finding the center of the posterior Gaussian pdf) and simulation (drawing samples of the posterior Gaussian pdf). We present the kriging system which we use to implement a flexible GSLIB-based algorithm for solving linear inverse problems.We show how we implement such a simulation program conditioned to linear average data. The program is called VISIM as an acronym for Volume average Integration SIMulation. An effort has been made to make the program efficient, even for larger scale problems, and the computational efficiency and accuracy of the code is investigated.Using a synthetic cross-borehole tomography case study, we show how the program can be used to generate realizations of the a posteriori distributions (i.e. solutions) from a linear tomography problem. Both Gaussian and non-Gaussian a priori model parameter distributions are considered.     

Evaluation of a type 1 diabetes serum cohort by SELDI-TOF MS protein profiling

Proteomics analysis of serum from patients with type 1 diabetes (T1D) may lead to novel biomarkers for prediction of disease and for patient monitoring. However, the serum proteome is highly sensitive to sample processing and before proteomics biomarker research serum cohorts should preferably be examined for potential bias between sample groups. SELDI‐TOF MS protein profiling was used for preliminary evaluation of a biological‐bank with 766 serum samples from 270 patients with T1D, collected at 18 different paediatric centers representing 15 countries in Europe and Japan over 2 years (2000–2002). Samples collected 1 (n = 270), 6 (n = 248), and 12 (n = 248) months after T1D diagnosis were grouped across centers and compared. The serum protein profiles varied with collection site and day of analysis; however, markers of sample processing were not systematically different between samples collected at different times after diagnosis. Three members of the apolipoprotein family increased with time in patient serum collected 1, 6, and 12 months after diagnosis (ANOVA, p<0.001). These results support the use of this serum cohort for further proteomic studies and illustrate the potential of high‐throughput MALDI/SELDI‐TOF MS protein profiling for evaluation of serum cohorts before proteomics biomarker research.     

Family psychosocial screening: should we focus on high-risk settings?

The objective of this study was to address the question of whether or not psychosocial screening should be focused on "high-risk" populations. A cross-sectional survey of mothers of young children was conducted in various clinics: 758 in teaching clinics, 444 in private practices, and 202 at a military clinic. The self-administered questionnaire covered demographic factors, problems in mothers family of origin, maternal depression, and substance abuse. Mothers in the teaching clinics were younger and had less education and lower incomes than mothers in private practices, with intermediate levels in the military clinic. However, a substantial proportion of mothers seen in all sites reported psychosocial problems. Approximately 20% of mothers in all sites reported a family history of alcoholism. Positive screens for maternal depression ranged from about 15% to 35%. Binge drinking was reported by 10% to 20% at different sites. Psychosocial problems were common even among families seen in "low-risk" settings. Focusing screening only on high-risk clinics would miss many families with psychosocial problems.     

Islet amyloid polypeptide in patients with pancreatic cancer and diabetes

Population-based psychiatric admission rates vary across geographic areas, but reasons for this variation are unknown. Insofar as Community Mental Health Centers (CMHCs) provide outpatient services that may deter the need for hospitalization, the presence and structural characteristics of CMHCs may have an impact on a population's psychiatric admission rates. This study uses small area analysis to examine how general hospital psychiatric admission rates are associated with CMHC characteristics. Based on a survey of all CMHCs in Iowa and corresponding small area variation data, it was found that population admission rates were higher in areas closer to the CMHC and lower in outlying catchment areas, adjusting for age, sex, and urban/rural differences in populations. There was little evidence that differences in staffing and service variables influenced admission rates, although greater CMHC staff coverage by social workers and psychiatric residents was associated with lower admission rates. The results suggest that CMHCs do not lower an area's hospitalization rate, and in fact, the presence of CMHCs may promote a "supplier-induced demand" phenomenon of higher admissions.     

Model-checking discrete duration calculus

Duration Calculus was introduced in [ZHR91] as a logic to specify and reason about requirements for real-time systems. It is an extension of Interval Temporal Logic [Mos85] where one can reason about integrated constraints over time-dependent and Boolean valued states without explicit mention of absolute time. Several major case studies, e.g. the gas burner system in [RRH93], have shown that Duration Calculus provides a high level of abstraction for both expressing and reasoning about specifications. Using Timed Automata [A1D92] one can express how real-time systems can be constructed at a level of detail which is close to an actual implementation. We consider in the paper the correctness of Timed Automata with respect to Duration Calculus formulae. For a subset of Duration Calculus, we show that one can automatically verify whether a Timed Automaton ? is correct with respect to a formulaD, abbreviated ? ?D, i.e. one can domodel-checking. The subset we consider is expressive enough to formalize the requirements to the gas burner system given in [RRH93]; but only for a discrete time domain. Model-checking is done by reducing the correctness problem ? ?D to the inclusion problem of regular languages.