Invited article: development of high-field superconducting Ioffe magnetic traps

We describe the design, construction, and performance of three generations of superconducting Ioffe magnetic traps. The first two are low current traps, built from four racetrack shaped quadrupole coils and two solenoid assemblies. Coils are wet wound with multifilament NbTi superconducting wires embedded in epoxy matrices. The magnet bore diameters are 51 and 105 mm with identical trap depths of 1.0 T at their operating currents and at 4.2 K. A third trap uses a high current accelerator-type quadrupole magnet and two low current solenoids. This trap has a bore diameter of 140 mm and tested trap depth of 2.8 T. Both low current traps show signs of excessive training. The high current hybrid trap, on the other hand, exhibits good training behavior and is amenable to quench protection.     

Serotonin and serotonin receptors in the central auditory system

Single channel currents were activated by GABA (0.5 to 5 microM) in cell-attached and inside-out patches from cells in the dentate gyrus of rat hippocampal slices. The currents reversed at the chloride equilibrium potential and were blocked by bicuculline (100 microM). Several different kinds of channel were seen: high conductance and low conductance, rectifying and "nonrectifying." Channels had multiple conductance states. The open probability (Po) of channels was greater at depolarized than at hyperpolarized potentials and the relationship between Po and potential could be fitted with a Boltzmann equation with equivalent valency (z) of 1. The combination of outward rectification and potential-dependent open probability gave very little chloride current at hyperpolarized potentials but steeply increasing current with depolarization, useful properties for a tonic inhibitory mechanism.     

Polarization control of a Q-switched, diode-pumped Nd:YAG laser

We describe control of the polarization state of a diode-pumped Nd:YAG laser that is Q switched with an acousto-optic modulator (AOM). One of two orthogonal linear polarization states can be made dominant, depending on the amount of loss introduced by the AOM. Heterodyne beating indicates that the two polarization states are of slightly different frequencies.     

Effectiveness of slow release L-DOPA/benserazide in treatment of end-of-dose akinesia in Parkinson disease

In an open label study 63 patients with idiopathic Parkinson's disease suffering from end-of-dose akinesia were switched from a treatment with a L-DOPA standard formulation to a combined therapy of L-DOPA standard in the morning and L-DOPA slow release (levodopa, benserazide, Madopar Depot) at the remaining single doses. Substitution of L-DOPA standard by L-DOPA slow release took on average 2-4 weeks. Patients were subsequently treated for 6 months. Due to a lower bioavailability of the slow release formulation--the latter is based on the "hydrodynamically balanced system" (HBS)--, the patients remained initially on their time schedule of drug intake but received a higher dose of L-DOPA slow release compared to the preceding L-DOPA standard therapy. In 20 centers 37 men and 26 women were included into the study. 27 males and 20 females completed the 6 month treatment period. Before switching, the patients received 438 +/- 213 mg a day L-DOPA standard, after conversion, the average dose was 617 +/- 323 mg L-DOPA slow release and 107 +/- 95 mg L-DOPA standard a day. Fluctuations during the day and at night which were rated according to a newly developed clinical 5-point rating scale were significantly improved by the treatment regimen from 2.8 +/- 0.9 to 1.4 +/- 1.2. Additionally, parkinsonian symptoms were significantly reduced during the ON-phase as there was a significant decrease of the Webster rating score from 12.0 +/- 4.6 to 7.1 +/- 4.0. Quality of life as measured by subjective ratings of the patients improved. The tolerability of the new formulation of L-DOPA was rated to be good in 51.1% and very good in 48.9%. The results of this open label study suggest that the combination of L-DOPA standard in the morning and L-DOPA slow release formulation at the following time points can be an efficient therapy in parkinsonian patients who suffer form L-DOPA related end-of-dose motor akinesia.     

Secure video communication using firefly optimization and visual cryptography

In recent years, we face an increasing interest in protecting multimedia data and copyrights due to the high exchange of information. Attackers are trying to get confidential information from various sources, which brings the importance of securing the data. Many researchers implemented techniques to hide secret information to maintain the integrity and privacy of data. In order to protect confidential data, histogram-based reversible data hiding with other cryptographic algorithms are widely used. Therefore, in the proposed work, a robust method for securing digital video is suggested. We implemented histogram bit shifting based reversible data hiding by embedding the encrypted watermark in featured video frames. Histogram bit shifting is used for hiding highly secured watermarks so that security for the watermark symbol is also being achieved. The novelty of the work is that only based on the quality threshold a few unique frames are selected, which holds the encrypted watermark symbol. The optimal value for this threshold is obtained using the Firefly Algorithm. The proposed method is capable of hiding high-capacity data in the video signal. The experimental result shows the higher capacity and video quality compared to other reversible data hiding techniques. The recovered watermark provides better identity identification against various attacks. A high value of PSNR and a low value of BER and MSE is reported from the results.

     

Boundary Spanning and Engineering: A Qualitative Systematic Review

Background

Engineers are often expected to span organizational, cultural, stakeholder, geographic, temporal, and other boundaries. Yet, few studies on boundary spanning have appeared in the engineering education literature, suggesting the need for improved theoretical and conceptual foundations to guide empirical studies of boundary spanning in engineering.

Purpose

To develop a more comprehensive understanding of boundary spanning, this study addresses five research questions: (a) What types of boundaries have been identified as topics of interest? (b) How are boundary spanners and boundary spanning defined? (c) What types of activities and behaviors comprise or have been linked to boundary spanning? (d) What individual competencies and characteristics have been proposed or studied as important for boundary spanning? and (e) What boundary spanning themes are most prominent in studies of engineers and other technical professionals?

Scope/Method

Using a qualitative systematic review process, we identified and analyzed 72 scholarly papers from multiple disciplines. Multiple reviewers coded each paper using a hybrid deductive‐inductive content analysis process to identify key themes related to boundary spanning.

Conclusions

The analysis resulted in a framework consisting of six boundary types, three types of roles and definitions, and five types of activities. Discussion of boundary spanning competencies was limited in the collected works, and only seven papers exclusively focused on engineers. We conclude by proposing boundary spanning as an important meta‐attribute for engineers and a promising lens for investigating engineering practice. We also relate our findings to the engineering education literature and suggest directions for future research.     

Predicting whether a material is ductile or brittle

In this paper we discuss the various models that have been used to predict whether a material will tend to be ductile or brittle. The most widely used is the Pugh ratio, $G/K$, but we also examine the Cauchy pressure as defined by Pettifor, a combined criterion proposed by Niu, the Rice and Thomson model, the Rice model, and the Zhou-Carlsson-Thomson model. We argue that no simple model that works on the basis of simple relations of bulk polycrystalline properties can represent the failure mode of different materials, particularly where geometric effects occur, such as small sample sizes. Instead the processes of flow and fracture must be considered in detail for each material structure, in particular the effects of crystal structure on these processes.     

Field calibration unit for ultraviolet spectroradiometers

Horizontal standard lamps calibrate the spectral irradiance responsivity of spectroradiometers that measure solar ultraviolet irradiance. A field calibration unit and power supply developed to meet the requirements for using these standards in the field are described and their operation and associated uncertainties are detailed. Results from assessments obtained at two field instrument intercomparisons indicate that the horizontal standard, field calibration unit, and power supply operate within the design tolerances, making them suitable for performing routine calibrations in the field on most ultraviolet spectroradiometers.     

Thermogravimetric–differential thermal analysis of the solid-state decomposition of ammonium tetrathiomolybdate during heating in argon

The formation of MoS2 by thermal decomposition of ammonium tetrathiomolybdate (ATT) solids under an argon atmosphere has been studied by simultaneous thermogravimetric and differential thermal analysis. The sequential products for the decomposition upon heating to 700 °C is ATT (hydrated)(NH4)2MoS4(NH4)HMoS4H2MoS4MoS3 Mo2S5MoS2. MoS2 forms between 230 and 260 °C and remains stable up to about 360 °C when it tends to be oxidized by residual oxygen, if present in the atmosphere. These findings suggest that the synthesis of MoS2 from (NH4)2MoS4 via formation of MoS3 is not a direct process, as previously reported, but rather a complex process involving a number of intermediate products (NH4)HMoS4, H2MoS4 and Mo2S5 which have not been reported before. That these products are only specific to the very narrow temperature regimes as revealed suggests that they are very unstable and short lived, that their presence is transient in nature and thus that ex-situ characterization of them is normally difficult. The presence of these intermediate products, as justified experimentally, is further interpreted in terms of their mutual structural similarities which improve understanding as to why MoS2 can usually be prepared from ATT by thermal decomposition, as in this case, or by other techniques, such as anodizing. Laminar morphology of MoS2 is revealed by transmission electron microscopy and its crystal structure examined by selected-area diffraction. Further ex-situ examination by X-ray photoelectron spectroscopy of this end product supports the feasibility of preparing MoS2 from aqueous solutions by anodizing. © 1998 Kluwer Academic Publishers     

Costimulatory molecule-deficient dendritic cell progenitors (MHC class II+, CD80dim, CD86-) prolong cardiac allograft survival in nonimmunosuppressed recipients

We have shown previously that granulocyte-macrophage colony-stimulating factor-stimulated mouse bone marrow-derived MHC class II+ dendritic cell (DC) progenitors that are deficient in cell surface expression of the costimulatory molecules B7-1 (CD80) and B7-2 (CD86) can induce alloantigen-specific T-cell anergy in vitro. To test the in vivo relevance of these findings, 2 x 10(6) B10 (H2b) mouse bone marrow-derived DC progenitors (NLDC 145+, MHC class II+, B7-1dim, B7-2-/dim) that induced T-cell hyporesponsiveness in vitro were injected systemically into normal C3H (H2k) recipients. Seven days later, the mice received heterotopic heart transplants from B10 donors. No immunosuppressive treatment was given. Median graft survival time was prolonged significantly from 9.5 to 22 days. Median graft survival time was also increased, although to a lesser extent (16.5 days), in mice that received third-party (BALB/c; H2d) DC progenitors. Ex vivo analysis of host T-cell responses to donor and third-party alloantigens 7 days after the injection of DC progenitors (the time of heart transplant) revealed minimal anti-donor mixed leukocyte reaction and cytotoxic T lymphocyte reactivity. These responses were reduced substantially compared with those of spleen cells from animals pretreated with "mature" granulocyte-macrophage colony-stimulating factor + interleukin-4-stimulated DC (MHC class IIbright, B7-1+, B7-2bright), many of which rejected their heart grafts in an accelerated fashion. Among the injected donor MHC class II+ DC progenitors that migrated to recipient secondary lymphoid tissue were cells that appeared to have up-regulated cell surface B7-1 and B7-2 molecule expression. This observation may explain, at least in part, the temporary or unstable nature of the hyporesponsiveness induced by the DC progenitors in nonimmunosuppressed recipients.