A fluidized bed retort for oil sands

Fluid bed retorting of oil sands is a viable method of extracting oil from mined oil sands. The process is based on a direct heating concept in which one vessel is utilized for the pyrolysis and vaporization of the bitumen contained in the oil sand and for the burning of the residuals which remain with the sand. Experimental results show that a significantly upgraded liquid hydrocarbon product can be obtained. Oil yields can exceed eighty per cent of the bitumen present in the feed material. The sulfur content of the produced oil is reduced. Gas produced can have a significant heating value and contains sulfur mainly in the form of hydrogen sulfide. Refluxing of the overhead product increases liquid yields and reduces the sulfur content of the oil. Water injection and the use of enriched air has a beneficial effect on the process. Thermal efficiencies in excess of eighty per cent can be achieved without recovering the heat from the expended sand.     

Dufour's gland and its role in secretion of nest cell lining in bees of the genusColletes (Hymenoptera: Colletidae)

The liquid secretion of the Dufour's gland in mated females comprises a mixture of macrocyclic lactones, straight chain mono- and dicarboxylic acids, together with trace amounts of di- and trihydroxy monocarboxylic acids and a series ofn-alkanes. Polymerization of the liquid to form the membranous nest cell lining, which also contains alanine and glutamic acid as major constituents, may be mediated by an enzyme from the thoracic salivary gland and voided via the mouth. The composition and structure of the cell linings are similar to those of Wigglesworth's cuticulin.     

Good Enough is Good Enough: Overcoming Disaster Response Organizations’ Slow Social Media Data Adoption

Organizations that respond to disasters hold unreasonable standards for data arising from technology-enabled citizen contributions. This has strong negative potential for the ability of these responding organizations to incorporate these data into appropriate decision points. We argue that the landscape of the use of social media data in crisis response is varied, with pockets of use and acceptance among organizations. In this paper we present findings from interviews conducted with representatives from large international disaster response organizations concerning their use of social media data in crisis response. We found that emergency responders already operate with less than reliable, or “good enough,” information in offline practice, and that social media data are useful to responders, but only in specific crisis situations. Also, responders do use social media, but only within their known community and extended network. This shows that trust first begins with people and not data. Lastly, we demonstrate the barriers used by responding organizations have gone beyond discussions of trustworthiness and data quality to that of more operational issues.     

Structural characterization of vulcanizates. Part VI. The 2-mercaptobenzothiazole-accelerated natural rubber–sulfur system

The crosslinking efficiency of sulfur in the vulcanization of natural rubber in the presence of 2-mercaptobenzothiazole, zinc oxide, and lauric acid has been determined as a function of cure time, cure temperature, and lauric acid concentration. With a low concentration of lauric acid structurally complex networks are formed, which contain 11–19 combined sulfur atoms per chemical crosslink present. The complexity increases with time of vulcanization. With a high lauric acid concentration much simpler networks are formed, which become progressively more simple as reaction proceeds (6 network-combined sulfur atoms per chemical crosslink, decreasing to 2.4 with time). Increasing the cure temperature from 100 to 140°C. reduces the efficiency of crosslinking in both cases. The changes in efficiency are attributed to the influences of the reaction variables (in particular, the concentration of rubber-soluble complexes of the zinc laurate with zinc benzothiazolyl mercaptide) on the structure and subsequent reactions of initially formed polysulfidic crosslinks.     

Molecular sieve properties obtained by cracking of methane on activated carbon fibers

Molecular sieve properties of activated carbon fibers modified by cracking treatment with methane are studied herein. The effect of methane treatment on the porous texture of the samples has been studied while varying temperature and time. These materials have been evaluated for their selectivity during CO₂ and CH₄ separation; their uptakes have been compared with non-treated activated carbon fibers (studied previously), which were considered suitable to be used as molecular sieves. Kinetics of CO₂ and CH₄ uptake have also been investigated in this research. The treatment produced materials exhibiting fast kinetics and high selectivity during CO₂ and CH₄ separation; at the same time however, the CO₂ uptake capacity was diminished.     

Microstructure, mechanical and tribological properties of Cr1−xAlxN films deposited by pulsed-closed field unbalanced magnetron sputtering (P-CFUBMS)

Nanocrystallized Cr_1−xAl_xN films with various Al contents (0 to 68 at.%) were deposited by pulsed closed field unbalanced magnetron sputtering (P-CFUBMS). The effects of aluminum content on the microstructure, mechanical and tribological properties of the Cr_1−xAl_xN films have been investigated. It was found that the hardness and elastic modulus of Cr_1−xAl_xN films increased with increasing Al contents in the films and reached the highest value of 36 GPa and 370 GPa, respectively, at an Al content of 58.5 at.%. Addition of Al beyond 64.0 at.% resulted in a change in crystal structure from B1 cubic to B4 hexagonal phase. The wear resistance improved gradually with the increase of Al in the Cr_1−xAl_xN films. A combination of the abrasive and adhesive wear mechanism was proposed based on the SEM and EDS analysis of the wear track. The steady state dry coefficient of friction measured against a WC ball for the Cr_1−xAl_xN films were in the range of 0.36-0.55, and the wear rate was in the 10^− 6 mm³ N^− 1 m^− 1 range.     

Elemental Powder Approaches to Ni3Al-Matrix Composites

Reactive sintering and hot isostatic compaction of mixed elemental powders have been combined to fabricate full density NiAl intermetallic-matrix composites. This process involves the formation of the matrix compound from its elemental constituents through an exothermic reaction. Dispersed ceramic phases inhibit direct consolidation, necessitating superposition of external pressure via hot isostatic compaction to obtain full density. The latter process is termed reactive hot isostatic pressing (RHIP). Because of its flexibility and low cost, this fabrication process merits attention as a means of preparing monolithic compounds and intermetallic-matrix composites.     

Development of an operational fitness test for the Royal Air Force

Since 2002, the Royal Air Force (RAF) has been working towards developing role-related physical tests for use as an operational fitness test (OFT). The purpose of this study was to establish reliability of the OFT (comprising four tests), investigate gym-based tests as predictors of performance and establish performance standards. Fifty-eight RAF personnel performed the OFT on three occasions. A separate cohort carried out fitness and anthropometric tests before performing the OFT, by way of establishing performance predictors. Documented evidence and views of an expert panel were used to determine OFT standards. Reliability ranged from moderate to good for three tests, with one test (Dig) showing poor reliability. The 95% limits of agreement for the prediction models ranged from good to poor (6.7-34.2%). The prediction models were not sufficiently accurate to estimate confidently OFT performance, but could be used as a guide to quantify likely outcome and training needs.     

Efficient application identification and the temporal and spatial stability of classification schema

Motivated by the importance of accurate identification for a range of applications, this paper compares and contrasts the effective and efficient classification of network-based applications using behavioral observations of network-traffic and those using deep-packet inspection.Importantly, throughout our work we are able to make comparison with data possessing an accurate, independently determined ground-truth that describes the actual applications causing the network-traffic observed.In a unique study in both the spatial-domain: comparing across different network-locations and in the temporal-domain: comparing across a number of years of data, we illustrate the decay in classification accuracy across a range of application–classification mechanisms. Further, we document the accuracy of spatial classification without training data possessing spatial diversity.Finally, we illustrate the classification of UDP traffic. We use the same classification approach for both stateful flows (TCP) and stateless flows based upon UDP. Importantly, we demonstrate high levels of accuracy: greater than 92% for the worst circumstance regardless of the application.