Utilisation de couples d'hydrocarbures dans les frigopompes et les thermofrigopompes à absorptionUtilisation of hydrocarbon pairs in absorption heat pumps in cooling applications

The performances of two systems using hydrocarbon pairs are compared. The first system is an absorption heat pump, comprising a rectification column separator and a mixer comprising a single-stage cell. In this case, five hydrocarbon pairs are used. In the second system, the authors compare the performances of three hydrocarbon pairs in two heat pumps with one or two stages in the mixer. It was shown that the best performances are obtained using pairs with the most similar chemical compositions.     

Studies of palladium electrodeposition from baths based on Pd(NH3)2X2 Part II: X=Br and X=NO2

The chemistry and electrochemistry of electroplating baths based on Pd(NH₃)₂Br₂ and Pd(NH₃)₂(NO₂)₂ has been investigated and compared with that previously reported for Pd(NH₃)₂Cl₂. It is shown that electroactive species in all the baths is Pd(NH₃) ₄ ²⁺ and, hence, the mechanisms and current efficiencies for the cathodic deposition of palladium metal are similar in all three media. On the other hand, only in bromide electrolytes is the palladium found to dissolve anodically.     

Electrocatalyst performance in industrial water electrolysers

Electrocatalyst materials used in industrial water electrolysis equipment must meet stringent requirements for long-term stability. Low electrode overvoltages must be sustained over prolonged periods of normal operation, including power interruptions. This paper presents an overview of the catalyst systems currently favoured for use in alkaline electrolyte. Performance data covering test periods exceeding 30 000 h are presented for representative commercial electrocatalysts. Results obtained in 100 000-A unipolar cells are correlated in detail with expectations based on measurements in laboratory and pilot-plant equipment.Particular attention is given to the effects of open-circuit conditions on electrode stability. An accelerated reverse-potential cycling test is described which allows identification of materials expected to withstand industrial operating conditions. It is found that the better materials which have been identified can be used with confidence, at least in electrolysers of the unipolar design in which potential variations encountered during current interruptions are modest.     

Multitemporal passive microwave mapping in MACHYDRO'90

MACHYDR0'90 was an experiment conducted in Pennsylvania in 1990 to study the synergistic use of remote sensors in multitemporal hydrologic studies. As part of this mission the pushbroom microwave radiometer was flown and used to produce brightness temperature maps. Verification studies and vegetation algorithms for mixed land cover areas are described     

Analysis of tungsten and titanium migration during ESD contact burnout

A physical and chemical analysis of a machine model (MM) electrostatic discharge (ESD) failure in a silicon circuit was carried out. Focused ion beam (FIB) was used to make cross sections through the region of contact burnout. The resulting samples were analyzed using scanning electron microscopy (SEM) and two-dimensional (2-D) auger electron spectroscopic (AES) mapping. It is shown for the first time that both titanium (Ti) and tungsten (W) migrated throughout the melted silicon filament. Large pellets of the W plug were embedded in the bulk silicon but only on the cathode side of the junction. Mechanisms are discussed to explain these phenomena. These involve the melting of titanium disilicide (TiSi/sub 2/), dissolution of Ti and W in the molten silicon and the formation of W pellets through electromigration at temperatures below /spl sim/1800 K.     

The late results of the surgical treatment of patients with a pathologically mobile kidney

Long-term (1-10 years) results of wandering kidney surgery were followed-up for 118 patients. The outcomes were found dependent on the duration of the disease, variety and severity of the lesion, age of the patients. The response appeared better in younger patients, in those with shorter duration of the disease and with unessential changes in the kidney. Recommendations are provided on the regimens, jobs, outpatient and inpatient follow-up for the subjects treated surgically for wandering kidney to reinforce the correction results achieved.     

Ab-initio primitive cell parameters from single convergent-beam electron diffraction patterns: a converse route to the identification of microcrystals with electrons.

A new method for the ab initio derivation of Buerger-reduced primitive cell parameters from coordinate measurements of spots on single convergent-beam electron diffraction (CBED) patterns is described, which does not involve trial-and-error. The pattern can be taken along any zone axis, and misorientations of the crystallite by as much as a few degrees are taken into account without loss of accuracy. This derivation of cell parameters by least-squares analysis of the measurements has been automated in a program called NRCBED. Present accuracy is about 1% on lengths and 2 degrees on angles, but could be significantly improved by modelling projector lens aberrations, or by using a microscope without a projector lens. With present technology, it is possible to obtain a CBED pattern and a semi-quantitative energy-dispersive X-ray (EDX) analysis simultaneously from a single microcrystal a few hundred Angstr?ms across. It becomes therefore possible to identify the material of the crystal on a single CBED pattern: a cell parameter database for known compounds is searched with the primitive cell parameters obtained in the above way, and with a mask describing the EDX results qualitatively. Feasibility is demonstrated on a crystallite of CeO2 500 Angstr?ms across. With this new approach, trial-and-error should disappear from the solution of other long-standing problems: interpretation of X-ray powder patterns for new compounds in the presence of impurity lines, or in the case of multiple phases should become straight-forward.