Highly integrated direct conversion receiver for GSM/GPRS/EDGE with on-chip 84-dB dynamic range continuous-time /spl Sigma//spl Delta/ ADC

This paper describes a highly digitized direct conversion receiver of a single-chip quadruple-band RF transceiver that meets GSM/GPRS and EDGE requirements. The chip uses an advanced 0.25-/spl mu/m BiCMOS technology. The I and Q on-chip fifth-order single-bit continuous-time sigma-delta (/spl Sigma//spl Delta/) ADC has 84-dB dynamic range over a total bandwidth of /spl plusmn/135 kHz for an active area of 0.4 mm/sup 2/. Hence, most of the channel filtering is realized in a CMOS IC where digital processing is achieved at a lower cost. The systematic analysis of dc offset at each stage of the design enables to perform the dc offset cancellation loop in the digital domain as well. The receiver operates at 2.7 V with a current consumption of 75 mA. A first-order substrate coupling analysis enables to optimize the floor plan strategy. As a result, the receiver has an area of 1.8 mm/sup 2/.     

Dynamics of the transient buildup of emission inNd3+-doped fiber lasers

The two-stage process of the transient buildup of emission in Nd ⁴⁺-doped fiber lasers is described both experimentally and theoretically. After switching on the pump, spontaneous emission increases first until the gain becomes sufficient to compensate for the cavity losses; the laser field then develops and reaches the steady state after more or less regular oscillations. During this second stage, an almost chaotic spiking is obtained either for high pumping rates and/or at low temperatures. The whole set of these dynamical scenarios is not described under the usual assumptions of uniform cavity losses over the whole field spectrum and of pure homogeneous broadening for the transition line, but rather a modified form of the Maxwell-Bloch equations which retains some frequency dependence for the losses in the cavity and the inhomogeneous broadening as well is proposed     

A distributed approach for access and visibility task with a manikin and a robot in a virtual reality environment

This paper presents a new method, based on a multi-agent system and on a digital mock-up technology, to assess an efficient path planner for a manikin or a robot for an access and visibility task taking into account ergonomic constraints or joint and mechanical limits. In order to solve this problem, the human operator is integrated in the process optimization to contribute to a global perception of the environment. This operator cooperates, in real time, with several automatic local elementary agents. The result of this work validates solutions through the digital mock-up; it can be applied to simulate maintainability and mountability tasks.     

Elastic properties of polycrystalline gold thin films: Simulation and X-ray diffraction experiments

The elastic behavior of supported gold thin films has been studied using a framework in which the elastic interaction between grains and the actual structure of the film (i.e. preferential grain orientation and grain shape) are taken into account. Experiments were carried out using synchrotron X-ray diffraction combined with in-situ tensile testing and thereafter, no assumptions on the residual stress state and on the stress-free lattice parameter a₀ have to be made. Modeling of grain elastic interactions is based on the extension of Eshelby-Kröner model, which allows for estimating the elastic behavior of polycrystals considering the texture and the shape of the crystallites. Flat-disc shaped grains arrangement is shown to yield the best representation of the elastic behavior of the fiber-textured gold thin films composed of columnar grains. This non-intuitive representation results from free-surface effect.     

In situ regeneration of the Ni-based catalytic reformer of a 5 kW PEMFC system

The paper reports the results of on-site regeneration catalytic bed of the natural gas reformer in a 5 kW PEM fuel cell system. The Ni catalyst previously poisoned by sulphur from the available natural gas, could be re-activated by injection of pure water steam, following the method developed for industrial reformers using the same metal catalyst: this method was shown to be perfectly efficient, provided no natural gas was fed during the operation. Results of the tests conducted are presented and discussed in relation to published data on S-sorption on Ni surfaces.     

Pinhole density measurements of barriers deposited on low-k films

Evaluation of diffusion barrier integrity is an important issue in advanced interconnects. A diffusion barrier separating Cu from low-k must be as thin as possible and must not contain pinholes. We have developed a method for measuring pinhole density in diffusion barriers deposited on low-k materials. The method employs ellipsometric porosimetry for measuring diffusion of toluene in a porous low-k film beneath the barrier in question.     

New integrated buried laser-ridge modulator with identical active layer

Integrated laser modulators are attractive devices for wavelength-division-multiplexing optical systems due to their compactness, high output power, and low cost. Their fabrication simplicity is a way to decrease further the transmitter cost and address new opening markets of short range and metropolitan networks. We report a new integration scheme electroabsorption-modulator distributed feedback (DFB) laser based on well-established industrial solutions for discrete buried ridge (BRS) DFB lasers and discrete shallow ridge modulators. Processing simplification with an identical active layer has been possible due to a good behavior of strongly positively detuned BRS lasers. The integrated devices demonstrated 30-dB extinction ratio with 10-GHz bandwidth and P/sub out/=10 dBm for emission in 1.55-/spl mu/m range.     

An efficient purification method for detonation nanodiamonds

This article reports the purification process of detonation soot to obtain pure nanodiamond powder. Nanodiamonds are synthesized by detonation using a high explosive mixture composed of trinitrotoluene and hexogen. The detonation of the charge leads to a powder containing nanodiamonds as well as metallic impurities and sp² carbon species. Further, to remove metallic particles, an unusual acidic treatment (hydrofluoric/nitric acids; i.e. fluorinated aqua regia) was set up. To eliminate sp² carbon species such as graphite and amorphous carbon, a thermal oxidation treatment was performed at 420 °C under air in a furnace during several hours. Transmission Electronic Microscopy, Raman spectroscopy, X-ray diffraction and Thermo-Gravimetric Analysis showed that this purification process is very efficient. From TGA measurements, a model of the carbon grain combustion was developed by considering graphitic shells surrounding the nanodiamond particles, and was used to demonstrate that the selective oxidation of graphite was experimentally realistic. Moreover, another model was set up from specific area measurements to evaluate the thickness of the functional groups surrounding the nanodiamonds after the oxidation of sp² carbonaceous species. The treatment described herein was achieved on several tens of grams of product and could be easily adapted to the industrial scale.     

Proton NMR studies of cytochrome c peroxidase mutant N82A: hyperfine resonance assignments, identification of two interconverting enzyme ofecies, quantitating the rate of interconversion, and determination of equilibrium constants

The cyanide-ligated form of the baker's yeast cytochrome c peroxidase mutant bearing the mutation Asn82-->Ala82 ([N82A]CcPCN) has been studied by proton NMR spectroscopy. This mutation alters an amino acid that forms a hydrogen bond to His52, the distal histidine residue that interacts in the heme pocket with heme-bound ligands. His52 is a residue critical to cytochrome c peroxidase's normal function. Proton hyperfine resonance assignments have been made for the cyanide-ligated form of the mutant by comparison with 1-D and NOESY spectra of the wild-type native enzyme. For [N82A]CcPCN, proton NMR spectra reveal two significant phenomena. First, similar to results published for the related mutant [N82D]CcPCN [Satterlee, J. D., et al. (1994) Eur. J. Biochem. 244, 81-87], for Ala82 mutation disrupts the hydrogen bond between His52 and the heme-ligated CN. Second, four of the 24 resolved hyperfine-shifted resonances are doubled in the mutant enzyme's proton spectrum, leading to the concept that the heme active site environment is dynamically microheterogeneous on a very localized scale. Two magnetically inequivalent enzyme forms are detected in a pure enzyme preparation. Varying temperature causes the two enzyme forms to interconvert. Magnetization transfer experiments further document this interconversion between enzyme forms and have been used to determine that the rate of interconversion is 250 (+/- 53) s-1. The equilibrium constant at 20 degrees C is 1.5. Equilibrium constants have been calculated at various temperatures between 5 and 29 degrees C leading to the following values: delta H = 60 kJ mol-1; delta S = 0.20 kJ K-1 mol-1.