A decision support system model in estimating budgets for standard figure tools at Mattel Toys

Mattel Toys is a leading toy manufacturing company and Barbie is one of Mattel's major product lines. Mattel develops several variations of the toy every year which requires many duplicate tools for standard figure parts and tools for parts similar to the standard parts. The tooling engineer estimates the type of tools and the number of tools to be built to support a given production rate. This estimate, represented in a tool plan is carried out manually, giving rise to inaccuracies. A decision support system was developed to estimate the number of duplicate tools as well as the budgets to build these tools. The decision support system was checked for accuracy by conducting a case study.     

Conversion of Full-Scale Wet Scrubbers to Biotrickling Filters for H2S Control at Publicly Owned Treatment Works

Until recently, biological treatment of odors in biofilters or biotrickling filters was thought to require a longer gas contact time than chemical scrubbing, hence bioreactors for air treatment required a larger footprint. This paper discusses the conversion of chemical scrubbers to biological trickling filters. Initially, research was conducted with a laboratory-scale biotrickling filter. An effective open-pore polyurethane packing material was identified and H2S biotreatment performance was quantified. Key technical issues in determining the general suitability of converting wet scrubbers to biotrickling filters were identified, and a generic ten-step conversion procedure was developed. Following the laboratory research, five full-scale chemical scrubbers treating odorous air at the Sanitation District of Orange County, Calif., were converted to biotrickling filters. The original airflow rate was maintained, resulting in a gas contact time as low as 1.6–3.1?s. The converted biotrickling filters demonstrated an excellent capability for treating high H2S concentrations to concentrations below regulatory limits. This study shows outstanding potential for converting chemical scrubbers to biotrickling filters at publicly owned treatment works.     

Some Systematic Supersaturated Designs

Supersaturated designs are factorial designs in which the number of factors exceeds the number of observations. Satterthwaite has suggested constructing such designs by a randomization procedure (random balance designs). In the present paper systematic designs are constructed which are, in a certain sense, m nearly orthogonal M possible. Examples of such designs are given constructed on an electronic computer and some properties of the designs are discussed.     

Effects of short-term repeated exposure to different flooring surfaces on the behavior and physiology of dairy cattle

Dairy cattle managed in some pasture-based systems such as in New Zealand are predominantly kept outdoors all year around, but are often taken off pasture for periods of time in wet weather to avoid soil damage. It is common to keep cattle on concrete surfaces during such “stand-off” practices and we investigated whether the addition of rubber matting onto concrete areas improves the welfare of dairy cattle. Sixteen groups of 5 cows (4 groups/treatment, 5 cows/group) were allocated to 1 of 4 treatments (concrete, 12-mm-thick rubber mat, 24-mm-thick rubber mat, or deep-bedded wood chips) and kept on these surfaces for 18 h/24 h for 4 consecutive days (6 h on pasture/24 h). Each 4-d stand-off period was repeated 4 times (with 7 d of recovery between periods) to study the accumulated effects of repeated stand-off. Lying behavior was recorded continuously during the experiment. Gait score, stride length, hygiene score, live weight, and blood samples for cortisol analysis were recorded immediately before and after each stand-off period. Cows on wood chips spent the most time lying, and cows on concrete spent the least time lying compared with those on other surfaces [wood chips: 10.8 h, 24-mm rubber mat: 7.3 h, 12-mm rubber mat: 6.0 h, and concrete: 2.8 h/18 h, standard error of the difference (SED): 0.71 h]. Cows on concrete spent more time lying during the 6 h on pasture, likely compensating for the reduced lying during the stand-off period. Similarly, cows on concrete spent more time lying on pasture between stand-off periods (concrete: 12.1 h, 12-mm rubber mat: 11.1 h, 24-mm rubber mat: 11.2 h, and wood chips: 10.7 h/24 h, SED: 0.28 h). Cows on concrete had higher gait score and shorter stride length after the 4-d stand-off period compared with cows on the other surface types, suggesting a change in gait pattern caused by discomfort. Cows on rubber mats were almost 3 times dirtier than cows on concrete or wood chips. Cortisol and live weight decreased for all treatment groups during the stand-off period. We observed no major effect of the repeated stand-off exposure. In summary, adding rubber matting onto concrete surfaces for stand-off purposes is beneficial for animal welfare. A well-managed wood chip surface offered the best welfare for dairy cows removed from pasture, and the findings of this study confirm that a concrete surface decreases the welfare of cows removed from pasture.     

Accelerating protein release from microparticles for regenerative medicine applications

There is a need to control the spatio-temporal release kinetics of growth factors in order to mitigate current usage of high doses. A novel delivery system, capable of providing both structural support and controlled release kinetics, has been developed from PLGA microparticles. The inclusion of a hydrophilic PLGA–PEG–PLGA triblock copolymer altered release kinetics such that they were decoupled from polymer degradation. A quasi zero order release profile over four weeks was produced using 10% w/w PLGA–PEG–PLGA with 50:50 PLGA whereas complete and sustained release was achieved over ten days using 30% w/w PLGA–PEG–PLGA with 85:15 PLGA and over four days using 30% w/w PLGA–PEG–PLGA with 50:50 PLGA. These three formulations are promising candidates for delivery of growth factors such as BMP-2, PDGF and VEGF. Release profiles were also modified by mixing microparticles of two different formulations providing another route, not previously reported, for controlling release kinetics. This system provides customisable, localised and controlled delivery with adjustable release profiles, which will improve the efficacy and safety of recombinant growth factor delivery.     

Bacteria in a water‐damaged building: associations of actinomycetes and non‐tuberculous mycobacteria with respiratory health in occupants

We examined microbial correlates of health outcomes in building occupants with a sarcoidosis cluster and excess asthma. We offered employees a questionnaire and pulmonary function testing and collected floor dust and liquid/sludge from drain tubing traps of heat pumps that were analyzed for various microbial agents. Forty‐nine percent of participants reported any symptom reflecting possible granulomatous disease (shortness of breath on exertion, flu‐like achiness, or fever and chills) weekly in the last 4 weeks. In multivariate regressions, thermophilic actinomycetes (median = 529 CFU/m²) in dust were associated with FEV₁/FVC [coefficient = ?2.8 per interquartile range change, P = 0.02], percent predicted FEF_25–75% (coefficient = ?12.9, P = 0.01), and any granulomatous disease‐like symptom [odds ratio (OR) = 3.1, 95% confidence interval (CI) = 1.45?6.73]. Mycobacteria (median = 658 CFU/m²) were positively associated with asthma symptoms (OR = 1.5, 95% CI = 0.97?2.43). Composite score (median = 11.5) of total bacteria from heat pumps was negatively associated with asthma (0.8, 0.71?1.00) and positively associated with FEV₁/FVC (coefficient = 0.44, P = 0.095). Endotoxin (median score = 12.0) was negatively associated with two or more granulomatous disease‐like symptoms (OR = 0.8, 95% CI = 0.67?0.98) and asthma (0.8, 0.67?0.96). Fungi or (1→3)‐β‐D‐glucan in dust or heat pump traps was not associated with any health outcomes. Thermophilic actinomycetes and non‐tuberculous mycobacteria may have played a role in the occupants' respiratory outcomes in this water‐damaged building.     

澳大利亚皮尔蒙特半岛情人港酒店

历史上,皮尔蒙特半岛曾是悉尼的工业港区.与世界各地的很多港口一样,多年来,皮尔蒙特港也经历了重大的城市更新.该地区保留了规模和形态各异的18和19世纪建筑,包括砂岩别墅、住宅露台、酒吧、码头和仓库,形成了城市独特的历史文脉.     

The effectiveness of Light Rail transit in achieving regional CO<Subscript>2</Subscript> emissions targets is linked to building energy use: insights from system dynamics modeling

Cities worldwide face the challenges of accommodating a growing population, while reducing emissions to meet climate mitigation targets. Public transit investments are often proposed as a way to curb emissions while maintaining healthy urban economies. However, cities face a system-level challenge in that transportation systems have cascading effects on land use and economic development. Understanding how an improved public transit system could affect urban growth and emissions requires a system-level view of a city, to anticipate side effects that could run counter to policy goals. To address this knowledge gap, we conducted a case study on the rapidly growing Research Triangle, North Carolina (USA) region, which has proposed to build a Light Railway by 2026 along a heavily used transportation corridor between the cities of Durham and Chapel Hill. At the same time, Durham County has set a goal of lowering greenhouse gas emissions by 30% from a 2005 baseline by 2030. In collaboration with local stakeholders, we developed a system dynamics model to simulate how Light Rail transit and concurrent policies could help or hinder these sustainable growth goals. The Durham–Orange Light Rail Project (D–O LRP) model simulates urban–regional dynamics between 2000 and 2040, including feedbacks from energy spending on economic growth and from land scarcity on development. Counter to expectations, model scenarios that included Light Rail had as much as 5% higher regional energy use and CO₂ emissions than business-as-usual (BAU) by 2040 despite many residents choosing to use public transit instead of private vehicles. This was largely due to an assumption that Light Rail increases demand for commercial development in the station areas, creating new jobs and attracting new residents. If regional solar capacity grew to 640 MW, this would offset the emissions growth, mostly from new buildings, that is indirectly due to Light Rail. National trends in building and automobile energy efficiency, as well as federal emissions regulation under the Clean Power Plan, would also allow significant progress toward the 2030 Durham emissions reduction goal. By simulating the magnitude of technology and policy effects, the D–O LRP model can enable policy makers to make strategic choices about regional growth.     

Design modelling and measured performance of the vacuum system of the Diamond Light Source storage ring

A one-dimensional diffusion model of the Diamond Light Source storage ring vacuum system is described and its predictions are compared with actual measured static (without beam) and dynamic (with beam) pressures over more than 2000 A h of beam conditioning at 3 GeV. An average specific thermal outgassing yield of 1·10⁻¹¹ mbar l/(s cm²) during initial beam circulation is obtained, which reduces to 2·10⁻¹² mbar l/(s cm²) after an accumulated beam dose of 1000 A h and an elapsed time of 769 days. In the presence of stored electron beam, the pressure rises as expected due to photon stimulated desorption (PSD). The PSD yield reduces with beam dose according to a (−2/3) power law as was applied in the model. Predicted and measured dynamic pressures generally agree within a factor of 2 over the whole range of beam conditioning dose studied.     

Characterizing In‐Plane Geometrical Variability in Textile Ceramic Composites

We present a methodology for characterizing and reconstructing in‐plane weave variability in textile composites. Surface topography of a partially processed C‐fiber/SiC matrix composite panel was measured using digital image correlation. The centroids of tow segments that appear periodically on the fabric surface were located by image analysis and used as fiducial markers. Stochastic deviations of the fiducial markers from the ideal periodic weave structure indicate geometrical variance. Fourier analysis shows that spatial wavelengths of the deviations range from the size of one unit cell to the dimensions of the entire panel. Long‐range deviations are attributed principally to fabric deformation after manufacture, during handling. Short‐range fluctuations, extracted by computing spatial derivatives of the positions of the fiducial markers, are attributed to variations in tow packing density that arises during weaving. A simple set of statistics for these deviations is presented and its use in generating stochastic virtual specimens is demonstrated.