Experimental results of the erosion of molybdenum due to blistering by He+ bombardment

We report some preliminary measurement of the erosion rate of plasma dumps when bombarded with 100 keV He⁺ ions at high power density ( 1 MW/m²). The expected erosion rates, based on measurements of He blistering that were made at lower power density ( 0.3 MW/m²), indicate a potentially serious problem for fusion reactors. Our tests use a reactorlike power density and produce He blisters at a rate that is slower than predicted by 2 to 4 orders of magnitude, depending on the temperature of the molybdenum target.     

The behavior of small fatigue cracks at notches in corrosive environments

The behavior of small cracks growing out of the roots of blunt notches in compact type specimens of an austenitic steel was characterized under fatigue loading in wet H ₂ plus air environment. The growth rates of cracks in the size range of 0.125 mm to 0.75 mm were up to two orders of magnitude higher than the rates expected for conventional cracks at equal stress intensity range, K. It was also observed that the small cracks grew at these fast rates only in corrosive environments when the loading frequency was 0.02 Hz or less. At a frequency of 10 Hz, the behavior was in agreement with the trend predicted for conventional size cracks.The above observations are rationalized in terms of the breakdown of the concept of a single parameter representation of the crack tip stress and strain field by K or in terms of differences in crack tip environments between small and long cracks for the same bulk environment. A simple engineering model is proposed which adequately represents the observed small crack growth behavior.

---

Résumé On a procédé à la caractérisation, sous charges de fatigue en atmosphère humide de H ₂ et d'air, de petites fissures se développant à partir des racines d'entailles arrondies dans des éprouvettes compactes.Les vitesses de croissance des fissures d'une taille allant de 0,125 à 0,750 mm se sont révélé être de deux ordres de grandeur plus grandes que les vitesses prévues dans le cas de fissures conventionnelle, soumises aux mêmes variations de l'intensité de contrainte K. On a également observé que de petites fissures croissaient à ces grandes vitesses seulement dans des atmosphères corrosives, lorsque la fréquence de sollicitation était de 0,02 Hz ou moins. A la fréquence de 10 Hz, le comportement observé s'est trouvé en accord avec les tendances prévues pour des fissures de taille conventionnelle.Les observations ci-dessus sont rationnalisées en un élargissement du concept de représentation monoparamétrique par le facteur K du champ de contraintes et de dilatation à l'extrémité de la fissure, ou en termes des différences rencontrées dans l'environnement local de l'extrémité d'une fissure, selon que celle-ci est longue ou courte, et ce dans un même environnement global.On propose un modèle simple utilisable en pratique, pour représenter de manière adéquate le comportement à la croissance observé pour des petites fissures.

---

---

Metallurgy Department     

RelativizedNC

This paper introduces a notion of relativized depth for circuit families and discusses issues regarding uniform families of relativized circuits. This allows us to define a version of relativizedNC and compare it under various oracles with relativizedL, NL, andP. We see thatNC ₁ is properly contained inL if and only if there exists an oracleA such thatNC ₁ ^A is properly contained inL ^A . There is an oracleA where the hierarchy collapses,NC ₁ ^A = NC ^A , and another whereNC ₁ ^A NC ₂ ^A NC ^A P ^A . We then construct anA so that, for anyk, NC ₁ ^A contains a set not inNSPACE ^A (O(n ^k )), suggesting that the notion of relativized space is too weak or that of relativized depth is too strong.     

Experiment and simulation study of 3D magnetic field sensing for magnetic flux leakage defect characterisation

Magnetic flux leakage (MFL) testing is widely used to detect and characterise defects in pipelines, rail tracks and other structures. The measurement of the two field components perpendicular to the test surface and parallel to the applied field in MFL systems is well established. However, it is rarely effective when the shapes of the specimens and defects with respect to the applied field are arbitrary. In order to overcome the pitfalls of traditional MFL measurement, measurement of the three-dimensional (3D) magnetic field is proposed. The study is undertaken using extensive finite element analysis (FEA) focussing on the 3D distribution of magnetic fields for defect characterisation and employing a high sensitivity 3-axis magnetic field sensor in experimental study. Several MFL tests were undertaken on steel samples, including a section of rail track. The experimental and FEA test results show that data from not only the x- and z-axes but also y-axis can give comprehensive positional information about defects in terms of shape and orientation, being especially advantageous where the defect is aligned close to parallel to the applied field. The work concludes that 3D magnetic field sensing could be used to improve the defect characterisation capabilities of existing MFL systems, especially where defects have irregular geometries.     

Crystallinity in PPS–carbon composites: A study using diffuse reflection FT-IR spectroscopy and differential scanning calorimetry

A method based on diffuse reflection Fourier transform infrared (FT-IR) spectroscopy has been developed for determining the state of crystallinity in composite materials made from poly(phenylene sulfide) (PPS) reinforced with carbon fibers. Using this technique, good-quality spectra can be obtained directly from the surface of prepreg or molded composite; thus the method is rapid and nondestructive. Several peaks in the spectrum are sensitive to the crystallinity and can be used for quantitative characterization purposes. The recommended indicator is the ratio of the heights of the peaks at 1075 and 1093 cm^?1. Using a range of samples of varying crystallinity prepared by annealing amorphous prepreg, it has been shown that there is a very good correlation between this ratio and the enthalpy of crystallization as determined by differential scanning calorimetry. The effects of such annealing, as well as heating in air at high temperatures, have been investigated.     

Poly-1-hexene,synthesis and solubility in dense carbon dioxide

Several poly-1-hexene samples were prepared using different Ziegler-Natta catalysts, and their solubilities in dense carbon dioxide (CO₂) were studied. Despite the varied molecular weight distributions (MWD) in the polymers, a surprising correlation was found between intrinsic viscosity and dense CO₂ solubility. Due to the ability of dense CO₂ to extract low-molecular weight fractions preferentially, it is recommended that narrow MWD polymers be used, as far as possible, for dense CO₂ solubility determinations.     

Fundamentals of systems ergonomics/human factors

Ergonomics/human factors is, above anything else, a systems discipline and profession, applying a systems philosophy and systems approaches. Many things are labelled as system in today's world, and this paper specifies just what attributes and notions define ergonomics/human factors in systems terms. These are obviously a systems focus, but also concern for context, acknowledgement of interactions and complexity, a holistic approach, recognition of emergence and embedding of the professional effort involved within organization system. These six notions are illustrated with examples from a large body of work on rail human factors.     

Potentiostatic step experiments on pasted Pb-Sb and Pb-Sn-Ca electrodes

A range of cyclic electrochemical experiments have been carried out on electrodes of porous PbO₂ supported on a number of Pb-Sb and Pb-Sn-Ca alloys using micro-computer controlled potentiostatic stepping techniques. The results show that, in certain cases, the differences in electrochemical behaviour of the PbO₂ can be interpreted as being due to the effect of the support alloy.     

New analysis of non-newtonian turbulent flowndashyield-power-law fluids

The writers' new analysis of non-Newtonian turbulent flow is extended to the yield-power-law model. As the value of the exponent of the yield-power law decreases from unity, the calculated friction factor begins by converging toward the Newtonian line at high velocity, then parallels it, and finally diverges downward. This prediction agrees with previously unexplained experimental results.