Drinking Water Treatment Plant Design Incorporating Variability and Uncertainty

Both inherent natural variability and model parameter uncertainty must be considered in the development of robust and reliable designs for drinking water treatment. This study presents an optimization framework for investigating the effects of five variable influent parameters and three uncertain model parameters on the least-cost treatment plant configuration (contact, direct, or nonsweep conventional filtration) that reliably satisfies an effluent particulate matter concentration constraint. Incorporating variability and uncertainty within the decision-making framework generates information for investigating: (1) impacts on total cost and treatment reliability; (2) shifts on the least-cost treatment configuration for providing reliable treatment; and (3) the importance of the individual variable and uncertain parameter distributions for reliably satisfying an effluent water quality constraint. Increasing the magnitude of influent variability and model parameter uncertainty results in a greater expected design cost due, generally, to increases in process sizing required to reliably satisfy the effluent concentration constraint. The inclusion of variability and uncertainty can also produce a shift in the locations of the least-cost configuration regions, which are dependent on the expected influent water quality and the magnitude of variability and uncertainty. The additional information provided by incorporating the variable and uncertain parameters illustrates that parameter distributions related to the primary removal mechanism are critical, and that contact and direct filtration are more sensitive to variability and uncertainty than conventional filtration.     

Prototype Fabrication and Preliminary In Vitro Testing of a Shape Memory Endovascular Thrombectomy Device

An electromechanical microactuator comprised of shape memory polymer (SMP) and shape memory nickel-titanium alloy (nitinol) was developed and used in an endovascular thrombectomy device prototype. The microactuator maintains a straight rod shape until an applied current induces electro-resistive (Joule) heating, causing the microactuator to transform into a corkscrew shape. The straight-to-corkscrew transformation geometry was chosen to permit endovascular delivery through (straight form) and retrieval of (corkscrew form) a stroke-causing thrombus (blood clot) in the brain. Thermal imaging of the microactuator during actuation in air indicated that the steady-state temperature rise caused by Joule heating varied quadratically with applied current and that actuation occurred near the glass transition temperature of the SMP (86degC). To demonstrate clinical application, the device was used to retrieve a blood clot in a water-filled silicone neurovascular model. Numerical modeling of the heat transfer to the surrounding blood and associated thermal effects on the adjacent artery potentially encountered during clinical use suggested that any thermal damage would likely be confined to localized areas where the microactuator was touching the artery wall. This shape memory mechanical thrombectomy device is a promising tool for treating ischemic stroke without the need for infusion of clot-dissolving drugs.     

Protocol Customization for Improving MPI Performance on RDMA-Enabled Clusters

Optimizing Message Passing Interface (MPI) point-to-point communication for large messages is of paramount importance since most communications in MPI applications are performed by such operations. Remote Direct Memory Access (RDMA) allows one-sided data transfer and provides great flexibility in the design of efficient communication protocols for large messages. However, achieving high point-to-point communication performance on RDMA-enabled clusters is challenging due to both the complexity in communication protocols and the impact of the protocol invocation scenario on the performance of a given protocol. In this work, we analyze existing protocols and show that they are not ideal in many situations, and propose to use protocol customization, that is, different protocols for different situations to improve MPI performance. More specifically, by leveraging the RDMA capability, we develop a set of protocols that can provide high performance for all protocol invocation scenarios. Armed with this set of protocols that can collectively achieve high performance in all situations, we demonstrate the potential of protocol customization by developing a trace-driven toolkit that allows the appropriate protocol to be selected for each communication in an MPI application to maximize performance. We evaluate the performance of the proposed techniques using micro-benchmarks and application benchmarks. The results indicate that protocol customization can out-perform traditional communication schemes by a large degree in many situations.     

Maxillary sinus augmentation in the non-human primate: a comparative radiographic and histologic study between recombinant human osteogenic protein-1 and natural bone mineral

The posterior maxilla has traditionally been one of the most difficult areas to successfully place dental implants due to poor bone quality and close approximation to the maxillary sinus. Sinus augmentation procedures have become a viable means of assuring adequate bone for the placement of dental implants in this area. However, with the techniques currently employed, a considerable variation in the quality of bone attained with the sinus augmentation procedure exists. The purpose of this in vivo study was to evaluate the healing response and bone formation stimulated by 3 doses of recombinant human osteogenic protein-1 (rhOP-1), 0.25, 0.6, and 2.5 mg OP-1 per gram of collagen matrix; natural bone mineral; or collagen matrix alone (control) placed in the maxillary sinus of adult chimpanzees. Results were assessed using clinical, histologic, and radiographic techniques. Radiographic analysis of the computed tomography scans taken at 1 week, and 2.5, 4.5, and 6.5 months revealed a more rapid mineralization with the 2.5 mg OP-1/g collagen matrix and natural bone mineral treatment groups. The incremental bone mineral density (BMD) increase for these 2 treatments from 1 week to 2.5 months was over 2.5 times the increase found with the collagen matrix alone; these 2 treatments also had a higher BMD at the most superior slices evaluated when compared to the other 3 groups. Biopsy specimens were taken at 3.5, 5.5, and 7.5 months and for all 5 treatment groups bone formation was observed at all time points in the majority of the specimens. At 7.5 months the 2.5 and 0.6 mg OP-1/g collagen matrix treatment groups had an increase in the percent bone area when compared to the matrix alone control. In conclusion, these results demonstrate that sinus augmentation with natural bone mineral or 2.5 mg OP-1/g collagen matrix induce comparable radiographic and histologic evidence of bone formation and that both of these treatments performed superior to the control group of collagen matrix alone based upon all methods of evaluation.     

The sizes of peptides generated from protein by mammalian 26 and 20 S proteasomes. Implications for understanding the degradative mechanism and antigen presentation

Knowledge about the sizes of peptides generated by proteasomes during protein degradation is essential to fully understand their degradative mechanisms and the subsequent steps in protein turnover and generation of major histocompatibility complex class I antigenic peptides. We demonstrate here that 26 S and activated 20 S proteasomes from rabbit muscle degrade denatured, nonubiquitinated proteins in a highly processive fashion but generate different patterns of peptides (despite their containing identical proteolytic sites). With both enzymes, products range in length from 3 to 22 residues, and their abundance decreases with increasing length according to a log-normal distribution. Less than 15% of the products are the length of class I presented peptides (8 or 9 residues), and two-thirds are too short to function in antigen presentation. Surprisingly, these mammalian proteasomes, which contain two "chymotryptic," two "tryptic," and two "post-acidic" active sites, generate peptides with a similar size distribution as do archaeal 20 S proteasomes, which have 14 identical sites. Furthermore, inactivation of the "tryptic" sites altered the peptides produced without significantly affecting their size distribution. Therefore, this distribution is not determined by the number, specificity, or arrangement of the active sites (as proposed by the "molecular ruler" model); instead, we propose that proteolysis continues until products are small enough to diffuse out of the proteasomes.     

Synthesis of High Coercivity Core–Shell Nanorods Based on Nickel and Cobalt and Their Magnetic Properties

Hybrid magnetic nanostructures with high coercivity have immense application potential in various fields. Nickel (Ni) electrodeposited inside Cobalt (Co) nanotubes (a new system named Ni @ Co nanorods) were fabricated using a two-step potentiostatic electrodeposition method. Ni @ Co nanorods were crystalline, and they have an average diameter of 150 nm and length of ~15 μm. The X-ray diffraction studies revealed the existence of two separate phases corresponding to Ni and Co. Ni @ Co nanorods exhibited a very high longitudinal coercivity. The general mobility-assisted growth mechanism proposed for the growth of one-dimensional nanostructures inside nano porous alumina during potentiostatic electrodeposition is found to be valid in this case too.     

Efficacy of surgical treatment in traumatic central cord syndrome

BACKGROUND: Controversy surrounds the treatment of traumatic central cord syndrome (TCCS), as there are strong advocates for nonsurgical treatment for most patients. However, conservative treatment has been shown to yield a longer period of discomfort from pain and weakness in certain cases. METHODS: In a retrospective review of 114 patients presenting with acute or chronic TCCS from 1988-94, four different age groups were separately observed under different treatments. Motor and sensory recovery were assessed. RESULTS: Better results were achieved in younger patients, with or without radiographic abnormalities, and in patients with clinically correlated encroaching cord lesions who received early surgical decompression. CONCLUSIONS: Surgical intervention for TCCS must be addressed with careful clinical and radiographic survey. Removal of offending lesions in the subacute period results in significant motor and sensory improvement in short-term and long-term follow-up.