Prediction of Metal Removal Efficiency from Contaminated Soils by Physical Methods

Six metal-contaminated soil samples were submitted to physical methods of treatment. A wet magnetic separator, Wilfley shaking table, and jig gravimetric separator were used on different soil fractions. A mineralogical model describing lead-bearing particles with and without iron oxide has been proposed. A significant part of the selected metals from each of the soil samples were removed by physical treatment. Linear regression analyses gave many relationships predicting the efficiency of the separation processes. The most useful variable to predict the magnetic process efficiency is the proportion of magnetic fraction removed. The density of fraction being removed was the most significant factor predicting the performance of the Wilfley table or the jig. The most significant variable predicting lead, copper, tin, and zinc removal was the initial metal concentration entering the process. Positive relationships between the results of the mineralogical study and the removal efficiency were found. These different relations confirm that the proposed scheme and the associated quantitative mineralogical study (identification of lead-bearing phase, carrying phase, and mean surface ratio of lead-bearing phase on total surface of lead-bearing particles) proved to be useful.     

Transvasal closure of interatrial defects using the Babic double-umbrella occluder system

The purpose of the study was to assess the feasibility and safety of closure of atrial septal defects and patent foramen ovale by means of a new interventional technique. Transvasal closure of ostium secundum atrial septal defect and patent foramen ovale was performed in 18 patients using an occluder system for atrial septal defects. Two patients had undergone unsuccessful direct surgical closure years before. Implantation and follow-up were controlled using radiographic views both with and without contrast injection, transthoracic and multiplane transesophageal echocardiographic imaging, color Doppler sonography, and computed tomography. The defect was closed in 16 patients using 19 procedures. Removal of the devices through the sheath was indicated in 4 patients because of placement failure. Intraprocedural complications were ventricular fibrillation in one patient and fixation of the device in Chiari's network in an additional one. During 7-26 months follow-up occluder damage was seen in two patients and perforation of the left atrium in one patient. Thickening on the occluder surface was observed in two patients. There was no death. The system for closure of atrial septal defect is feasible and safe in patients with defects < or = 27 mm in diameter. Long-term observation of outcome is limited yet.     

Cloning of the human phenol sulfotransferase gene family: three genes implicated in the metabolism of catecholamines, thyroid hormones and drugs

Phenol sulfotransferases (PST) catalyze the sulfonation of catecholamines, thyroid hormones and phenolic drugs. At least two major forms of human PST enzyme have been characterized biochemically from liver, platelets and other tissues, the phenol-preferring PST (P-PST) and the monoamine neurotransmitter-preferring PST (M-PST). Molecular cloning efforts worldwide over the past 7 years have resulted in the identification of numerous PST cDNA isolates representing alleles of three human PST gene loci termed as STP1, STP2 and STM. All three genes have been mapped precisely to a small region on human chromosome 16p12.1-p11.2 (homologous to mouse chromosome 7), using somatic cell hybrids and cosmid clones. The two most closely related genes, STP1 and STP2, encoding P-PST isozymes have been mapped to a single cosmid clone and are, therefore, in close proximity to one another. STP1 and STP2 are approximately 96% identical at the amino acid sequence level, whereas, the STM gene (encoding M-PST) exhibits a lower level of identity (approximately 93-90.5%) relative to STP1 and STP2. STM is located at a distance of ca. 100 Kb from the STP1 and STP2 doublet. One may speculate that the three genes arose by gene duplication and/or gene conversion in humans. Genomic clones have been sequenced to determine the genomic organization for each of the three highly-related genes. All contain seven coding exons, with conserved intron exon boundaries. Sequencing of individual cDNA isolates of STP1 and STM from various tissues has revealed significant heterogeneity in the 5' nontranslated region, likely due to alternative splicing and/or tissue-specific promoter utilization. DNA polymorphisms have been detected in these genes in the human population and may be useful for molecular genetic studies of the metabolism of endogenous and xenobiotic phenolic molecules. Recent advances in the molecular biology of the human PST gene family are summarized.     

The putative nucleic acid helicase Sen1p is required for formation and stability of termini and for maximal rates of synthesis and levels of accumulation of small nucleolar RNAs in Saccharomyces cerevisiae

Sen1p from Saccharomyces cerevisiae is a nucleic acid helicase related to DEAD box RNA helicases and type I DNA helicases. The temperature-sensitive sen1-1 mutation located in the helicase motif alters the accumulation of pre-tRNAs, pre-rRNAs, and some small nuclear RNAs. In this report, we show that cells carrying sen1-1 exhibit altered accumulation of several small nucleolar RNAs (snoRNAs) immediately upon temperature shift. Using Northern blotting, RNase H cleavage, primer extension, and base compositional analysis, we detected three forms of the snoRNA snR13 in wild-type cells: an abundant TMG-capped 124-nucleotide (nt) mature form (snR13F) and two less abundant RNAs, including a heterogeneous population of approximately 1,400-nt 3'-extended forms (snR13R) and a 108-nt 5'-truncated form (snR13T) that is missing 16 nt at the 5' end. A subpopulation of snR13R contains the same 5' truncation. Newly synthesized snR13R RNA accumulates with time at the expense of snR13F following temperature shift of sen1-1 cells, suggesting a possible precursor-product relationship. snR13R and snR13T both increase in abundance at the restrictive temperature, indicating that Sen1p stabilizes the 5' end and promotes maturation of the 3' end. snR13F contains canonical C and D boxes common to many snoRNAs. The 5' end of snR13T and the 3' end of snR13F reside within C2U4 sequences that immediately flank the C and D boxes. A mutation in the 5' C2U4 repeat causes underaccumulation of snR13F, whereas mutations in the 3' C2U4 repeat cause the accumulation of two novel RNAs that migrate in the 500-nt range. At the restrictive temperature, double mutants carrying sen1-1 and mutations in the 3' C2U4 repeat show reduced accumulation of the novel RNAs and increased accumulation of snR13R RNA, indicating that Sen1p and the 3' C2U4 sequence act in a common pathway to facilitate 3' end formation. Based on these findings, we propose that Sen1p and the C2U4 repeats that flank the C and D boxes promote maturation of the 3' terminus and stability of the 5' terminus and are required for maximal rates of synthesis and levels of accumulation of mature snR13F.     

Describing motivation for health and treatment decisions and communication choices of calf-care workers on western United States dairies

On large dairy farms, animal health assessments and treatments are made by farm employees. Little is known about how employees make decisions about illness detection or treatment, information critical to improving antimicrobial stewardship. The objectives of this study were to describe calf-care employee motivations for decisions associated with preweaned calf health and treatments, describe on-farm worker communication networks, and determine information sources used by these employees to support their decisions. Personal interviews were conducted with 103 calf-care employees on 28 farms in the western United States. The interview consisted of 10 motivation source type (MST) questions and questions about training, communication and educational opportunities. A latent class analysis created a summary for MST and resulted in 4 classes. Forty-three percent of calf-care employees fell into a class where responses were a combination of internal and intrinsic (personal beliefs or values and task fulfillment, respectively) and 23% were a combination of internal and goal internal (aligned with organizational goals). This latter class aligned health decisions with internal motivation and treatment decisions with goal internal. A network analysis summarized dominant communication relationships and established that feeders and treaters perceived more communication with supervisors than was reciprocated by supervisors, and that there was less communication between workers and management for tasks relative to daily work. Employee training was primarily done by herdsman, calf manager, or coworkers, and information for skill improvement and problem solving was sought from these individuals. Although veterinarians were not often involved in employee training, when they were involved, employees were likely to use them as an information source for skill improvement and problem solving. Few participants had ever used social media, but almost all had a device that could access the internet; more than 60% indicated interest in a social media platform for work-related information. Work motivation for many calf caretakers appeared to be sourced from personal beliefs, values, and job fulfillment, particularly when deciding to treat a sick calf. Investigation and incorporation of beliefs and values in training programs could help with alignment of protocols with actual treatment and further efforts to implement judicious use of antimicrobials.     

John Mercer FRS,FCS, MPhS,JP: the Father of Textile Chemistry

John Mercer (1791–1866) was a pioneering textile and colour chemist with a legacy of achievements. His invention of mercerising that bears his name, treating cellulosics with sodium hydroxide to bring about advantageous changes in fibre and fabric properties, will stand for all time as one of the most important textile chemical treatments ever developed. However, Mercer's contributions to the textiles and coloration industries went far beyond mercerisation. A self‐taught chemical experimentalist par excellence, his keen observations and interest in calico printing led to many novel developments, such as his work on Chrome Yellow and other ‘mineral colours’. Mercer developed new methods for fixing Prussian Blue on calico and wool, developed new mordants for dyeing, improved the extraction of carminic acid from cochineal, and improved the oiling process in Turkey Red dyeing. He saved lives with his research into early antimicrobials, preventing the spread of cholera in textile villages in Lancashire. Mercer was an unsung hero of early photography, and developed light‐sensitive imaging materials and made some of the earliest recorded monochromatic colour photographs. His forward‐looking views on technical education, that workers in the industry should be fully instructed in the nature of the various substances used in their arts, later came to fruition in the establishment of the textile departments in Manchester, Leeds and Glasgow. To this day, Mercer remains the only textile chemist who has ever been elected as a Fellow of the Royal Society since 1852. He is thus quite rightly considered as the Father of Textile Chemistry.     

Aftertreatment of acid dyes on conventional nylon 6.6 with a commercial syntan/cation system. Part 3: Improvements to the Fixogene AC system

Dyeings (1% owf) were produced on conventional nylon 6.6 fabric using two commercial nonmetallised acid dyes. The fastness of the dyeings to the ISO 105:CO6/C2 wash test over five repetitions was determined. Aftertreatment of the dyeings using a commercial syntan alone improved the wash fastness after five washes, with respect to the non-aftertreated sample, whereas the sequential application of a cationic compound to the syntanned dyeings imparted a further improvement in wash fastness. Yet further improvements to the system could be achieved by varying the cationic agent, the amount of cationic agent applied and the pH of the application system.     

Patterns of increased in vivo fundus autofluorescence in the junctional zone of geographic atrophy of the retinal pigment epithelium associated with age-related macular degeneration

BACKGROUND: The impact of upper endoscopy in patients with upper gastrointestinal hemorrhage treated in community practice is unknown. Thus we examined the effectiveness of endoscopy performed within 24 hours of admission (early endoscopy). METHODS: Medical records of 909 consecutive hospitalized patients with upper gastrointestinal hemorrhage who underwent endoscopy at 13 hospitals in a large metropolitan area were reviewed. We evaluated unadjusted and severity-adjusted associations of early endoscopy with recurrent bleeding or surgery to control hemorrhage, length of hospital stay, and associations of endoscopic therapy in patients with bleeding ulcers or varices. RESULTS: Early endoscopy was performed in 64% of patients and compared with delayed endoscopy and was associated with clinically significant reductions in adjusted risk of recurrent bleeding or surgery (odds ratio [OR] 0.70: 95% CI [0.44, 1.13]) and a 31% decrease in adjusted length of stay (95% CI: [24%, 37%]). In patients at high risk for recurrent bleeding, the use of early endoscopic therapy to control hemorrhage was associated with reductions in recurrent bleeding or surgery (OR 0.21: 95% CI [0.10, 0.47]) and length of stay (-31%: 95% CI [-44%, -14%). CONCLUSION: In this study of community-based practice, the routine use of endoscopy, and in selected cases endoscopic therapy, performed early in the clinical course of patients with upper gastrointestinal hemorrhage was associated with reductions in length of stay and, possibly, the risk of recurrent bleeding and surgery.     

Evaluation of several culture media for production of patulin by Penicillium species

The aim of this study was to evaluate different species of Penicillium to identify those which have the potential to produce the greatest amount of the mycotoxin, patulin. Additionally, six different culture media were compared to determine maximum patulin production. Eleven different strains of Penicillium species were selected because they had previously been reported to be producers of patulin. The strains included Penicillium expansum, Penicillium griseofulvum (formerly Penicillium urticae), Penicillium clavigerum, and Penicillium coprobium and a recent Penicillium sp. isolated from an apple. Cultures were grown in duplicate in three different liquid media: potato dextrose, malt extract, and glucose/yeast extract/peptone, both with and without manganese supplementation. Patulin production was compared at 24, 48, 72, and 96 h. Variability in patulin production occurred among the different species, growth media used, and time of incubation. All three of the P. griseofulvum isolates were the highest producers of patulin at 96 h. For most of the strains, potato dextrose broth supplemented with manganese was optimal for maximum production of patulin. Although P. expansum is frequently cited as the most likely source of patulin in apple juice, certain other Penicillium species are capable of producing more patulin than strains of P. expansum. The apple juice industry should be alert to the possibility that Penicillium species other than P. expansum can be responsible for the occurrence of patulin.     

Aftertreatment of 1:2 metal complex acid dyes on conventional and microtibre nylon 6. 6 with a commercial syntan/cation system

Dyeings (2% owf) were produced on conventional and microfibre nylon 6. 6 fabrics using unsulphonated, monosulphonated and disulphonated 1:2 metal complex acid dyes. When subjected to the ISO 105:C06/C2 wash test, the wash fastness behaviour of the dyeings was related to the degree of sulphonation of the dyes. Aftertreatment of the dyeings using a commercial syntan improved the wash fastness of the dyeings whereas the sequential application of a cationic compound to the syntanned dyeings caused a further improvement in wash fastness.