The effect of increasing application rate of granular calcium ammonium nitrate on net nitrification in a laboratory study of grassland soils

Soil incubation studies were undertaken in controlled environment cabinets at 15°C to investigate the effect of increasing application rates of calcium ammonium nitrate (CAN) on net nitrification in two grassland soils. Granular CAN was applied to the surface of freshly collected, moist soil, at a rate equivalent to 0, 100, 200, 400, 800 and 1600µg NH ₄ ⁺ -N and NO ₃ ^- -N per gram of oven dry soil. In half the treatments finely ground CaCO₃ was incorporated into the moist soil to raise the starting pH. Changes in soil mineral N and pH were measured at weekly intervals up to six-weeks. The most probable number (MPN) technique was used to enumerate the NH ₄ ⁺ -N and NO ₂ ^- -N oxidizers at the beginning and end of the incubation.At low rates of CAN application there was considerable NH ₄ ⁺ -N oxidation to NO ₃ ^- -N during the incubation of both soils. Lime stimulated this N transformation. At high application rates (i.e. 800 and 1600 ppm) there was little change in NH ₄ ⁺ -N or NO ₃ ^- -N on either soil during the 6 week incubation, in the presence or absence of lime. The rate of NO ₃ ^- -N produced peaked at 5.6 and 3.8 mg NO ₃ ^- -N kg^–1 d^–1 on soil 1 and 2 respectively, in the presence of lime. Above a level of 400 ppm CAN (equivalent to 38 kg N ha^–1) the rate of NO ₃ ^- -N produced decreased. The higher rate of net nitrification in soil 1 compared with soil 2 was probably due to a higher number of nitrifying bacteria. Although high rates of CAN decreased the nitrifying activity of both soils there was little difference between treatments in the actual numbers of NH ₄ ⁺ -N and NO ₂ ^- -N oxidizers determined by the MPN technique.The results showed that the rate of granular CAN applied to the soil surface can influence the local activity of nitrifying bacteria and subsequent N transformations. At application rates of CAN generally used agriculturally for grass production, it is likely that net nitrification of the NH ₄ ⁺ -N in the fertilizer granule will be inhibited.     

Abrasion Resistance of Field-Assisted Ion-Exchanged Glass

The fracture strength of HF-etched samples was measured as a function of field-assisted K-Na ion exchange depth, as well as the severity of abrasion. As expected, the more severe the abrasion, the greater the depth required to make the strength insensitive to abrasion. An abrasion-independent weakening mechanism that increased with exchange depth was also found to be operative.     

Stress Superposition in High-Strength Glass

The introduction of surface compression via alkali-ion exchange is frequently used to strengthen alkali-containing glass. However, previous investigators found that when starting with high-strength glass, the strength measured after exchange was significantly less than the sum of the residual compression and the starting fracture strength. Results are presented which suggest that the source of this discrepancy is surface damage produced during the heat treatment accompanying the ion-exchange process. Further, when the surface damage was removed by shallow hydrofluoric acid etching, the resulting fracture strength did approximately equal the sum of the residual stress and the high starting strength.     

Diluent effects on carbonate mobility in bisphenol-A polycarbonate in the solid state

The effect of miscible low molecular weight additives on the mobility of the carbonate group in bisphenol-A polycarbonate (BPAPC) has been studied using n.m.r. and dielectric relaxation experiments in the solid state. Proton-enhanced dipolar-decoupled carbon-13 n.m.r. spectra of BPAPC, isotopically enriched at the carbonate position, are obtained without magic-angle sample spinning. The resolved chemical shift anisotropy allows study of nuclear spin relaxation for the carbonate groups in the polymer that have different orientations relative to the static magnetic field in the laboratory frame. The spin-lattice relaxation time in the rotating frame (T_1?) is measured at a motional-probe frequency of 50 kHz for the undiluted polymer and for BPAPC-diluent blends containing either dibutylphthalate or dinitrobiphenyl. The T_1? exhibits some dependence on orientation in all systems studied. In the blend containing dibutylphthalate (DBP), T_1? is decreased by a factor of two for all orientations of the carbonate group. This implies that DBP substantially increases the spectral density of 50 kHz motions in the carbonate region of the polymer at ambient temperature. In contrast, dinitrobiphenyl does not significantly alter the Fourier component of thermal fluctuations at 50 kHz. Dielectric relaxation measurements at 10 kHz reveal that the primary (T_g) and secondary (β) motional processes in BPAPC are affected by low molecular weight additives. An intermediate relaxation process appears in the temperature interval between the glass transition temperature (T_g) and the sub-T_g β-relaxation (T_β) in the polymer-diluent blends. The n.m.r. spin-lattice relaxation rate in the rotating frame, T^?1_1?, correlates well with the relative magnitude of the dielectric dissipation factor (tan δ_ε) between T_g and T_β.     

Advances and future prospects in copper electrowinning

In recent years research on the electrowinning of copper has led to a number of significant advances. These developments include improved mass transfer and higher current density operation through air sparging, reduced anode overvoltage in the conventional cell as a result of cobalt(II) addition to the electrolyte or the use of alternative types of anodes, and the production of high quality cathodes in the electrowinning of copper from solvent extraction strip liquor. The fluidized-bed cathode offers the possibility of continuous electrowinning as well as the direct electrowinning of copper from dilute solutions. The problem of high power consumption may find its solution in the adoption of an alternate anode reaction or in the electrowinning of copper (I) electrolytes. Noteworthy is the development of unique electrowinning cells in conjunction with the hydrometallurgical treatment of copper concentrates. These cells utilize cuprous or ferrous anodic oxidation with the resulting cupric or ferric ions being active lixiviants of sulphide copper minerals. The numerous advances combined with the increasing tonnage of copper being produced by the electrowinning route ensure an interesting and promising future for this process.     

An improved apparatus for oxygen bomb testing

An improved oxygen bomb apparatus has been developed. The increased precision and readability of the continuous pressure recording allows a new method of end-point measurement. It was possible to use smaller test samples than any previously reported. Sample size and oxygen pressure were shown to be relatively unimportant variables. Temperature is the most useful variable for controlling test time. This is preferable over sample dispersion or addition of catalysts in terms of simplifying the procedure. Peroxide formation at the oxygen bomb test end point is three to four times the value at the end point of the Active Oxygen Method. Presented at the AOCS meeting, New Orleans, April 1976. Part I of a series on Evaluation of Antioxidant Performance.     

Aeroelastic tailoring and scaling using Bacterial Foraging Optimisation

Bacterial Foraging Optimisation (BFO) is investigated in an attempt to evaluate its use in solving complex optimisation problems for aeronautical structures. A hybrid variant of BFOA, which incorporates meta-modelling techniques, is also proposed and employed. The efficiency and effectiveness of the methods are tested for tailoring a rectangular composite wing, aiming to maximise the flutter speed and for scaling a joined-wing aircraft, targeting to match aeroelastic responses between the physical prototype and wind tunnel model. The obtained results are compared with those found using a range of other biologically inspired optimisation methods (GA, PSO, ACO), proving that the social foraging behavior of motile bacteria is an effective tool for aeroelastic optimisation.     

Responses to prey chemicals by a lacertid lizard,Podarcis muralis: Prey chemical discrimination and poststrike elevation in tongue-flick rate

The ability to discriminate prey chemicals from control substances and the presence of a poststrike elevation in tongue-flicking (PETF) rate are experimentally demonstrated in the lacertid lizard,Podarcis muralis, The tongue-flick attack score, a composite index of response strength, was significantly higher in response to integumental chemicals from cricket than to cologne or distilled water. The cricket chemicals additionally elicited a significantly greater rate of tongue-flicking and higher proportion of attacks by the lizards than did control stimuli. PETF combined with apparent searching movements strongly suggest the presence of strike-induced chemosensory searching (SICS). Experimental evidence indicates that both PETF and SICS occur in insectivorous representatives of three families of actively foraging autarchoglossan lizards, suggesting their widespread occurrence in such lizards. The adaptive roles of chemosensory behavior in the foraging behavior of P.Muralis are discussed. It is proposed that these lizards may form chemical search images and that PETF and SICS may have been present in the lacertilian ancestors of snakes.