Modification of Polycarbonate and Glycol Modified Poly(ethylene terephthalate) by Addition of Silica‐Nanoparticles Grafted with SAN Copolymer Using “Classical” and ARGET ATRP

This study presents a nanocomposite manufacturing route starting from non‐functionalized nanosilica and SAN surface modification via “grafting from” ATRP up to processing of transparent polycarbonate and glycol modified poly(ethylene terephthalate) nanocomposites. Synthesis limitations of low molecular weight graft SAN derived from “classical” ATRP are overcome by employment of the emerging ARGET ATRP. Mechanical investigations of polycarbonate and glycol modified poly(ethylene terephthalate) nanocomposites present up to 80% enhancement of creep performance and additionally 70% enhancement against wear abrasion for glycol modified poly(ethylene terephthalate) nanocomposites. Strength and tensile modulus are only moderately influenced by the addition of nanoparticles. Morphological studies confirm that the present modification route is able to create uniform dispersions of single particles and small particle aggregates in polymer matrices.

     

Fischer–Tropsch synthesis: Deactivation of promoted and unpromoted cobalt–alumina catalysts

The loss in activity of Pt-promoted and unpromoted 25 wt% Co–Al₂O₃ catalysts has been compared under identical conditions except for adjustment of the space velocity to give the same initial CO-conversion. Both catalysts underwent a 200 h period of rapid, initial decline in CO conversion and then a slower, linear decline during the next 1000 h. Pt-promotion did not alter the cobalt dispersion (or average particle size) from that of the unpromoted catalyst but did increase the amount of cobalt that was reduced. When compared not by time-on-stream, but by the moles of Co converted per unit weight of catalyst, both the Pt-promoted and unpromoted catalysts decline in activity at the same rate.     

Towards Heterogeneous and Green Versions of Os Dihydroxylation Catalysis

Os-catalyzed dihydroxylation will find more widespread application if truly heterogeneous catalysts are available which use O₂ or H₂O₂ as terminal oxidants. This paper discusses and critically evaluates the concepts by which Os can be anchored on solid supports. New methods are also available for reoxidation of hexavalent to octavalent Os.     

Heterogeneous Enzyme Mimics Based on Zeolites and Layered Hydroxides

Careful combination of a metal compound,a ligand and an inorganic support material leads to supramolecular catalysts that mimic the structural, organizational and functional aspects of enzyme activity.After discussing essential features of metalloenzyme-catalyzed reactions and coordination chemistry in inorganic hosts, we present examples of supramolecular materials selected from our own work that eventually resulted in useful catalysts for organic transformations in the liquid phase.     

Hydrotalcite-like anionic clays in catalytic organic reactions

Hydrotalcite-like anionic clays (HTs; or layered double hydroxides, LDHs) can be used as precursors to mixed oxides, but their catalytic potential reaches much further. This review demonstrates that HTs can be successfully applied in a broad spectrum of organic reactions, with advantages such as improved activity, selectivity, metal dispersion, less waste production, and an improved recuperation of immobilized catalysts. HTs can be used in the as-synthesized form or after different pretreatments. The HT as such is a solid base or, depending on the elemental composition of its octahedral layers, may have redox properties. Specific metals can be incorporated either as a cation in the octahedral layer or as an anion via exchange. The anion-exchange strategy is especially successful in the context of heterogenizing homogeneous catalysts. A particular advantage for base catalysis is that the number and strength of the basic sites can be tuned precisely to a specific reaction. HTs are excellent materials to design bifunctional redox-base catalysts or to control the acid-base properties around a heterogenized metal complex. Potential applications of HTs range from the production of large-scale basic chemicals to the synthesis of small-scale specialty chemicals.     

Metallocenyl 7-ACA Conjugates: Antibacterial Activity Studies and Atomic-Resolution X-ray Crystal Structure with CTX-M β-Lactamase

The conjugation of organometallic groups to current β-lactam antibiotics is a field of increasing study due to the ability of certain organometallic groups to enhance the antibiotic potency of these drugs. Herein, we report the antibacterial properties of two metallocenyl (ferrocenyl and ruthenocenyl) 7-aminocephalosporanic acid (7-ACA) antibiotic conjugates. Continuing a trend we found in our previous studies, the ruthenocenyl conjugate showed greater antibacterial activity than its ferrocenyl counterpart. Compared with the previously published 7-aminodesacetoxycephalosporanic acid (7-ADCA) conjugates, the 3-acetyloxymethyl group significantly improved the compounds’ activity. Furthermore, the Rc-7-ACA compound was more active against clinical Staphylococcus aureus isolates than the ampicillin reference. Noticeably, neither of the two new compounds showed an undesirable toxic effect in HeLa and L929 cells at the concentrations at which they displayed strong antibacterial effects. The antibacterial activity of the two metallocenyl 7-ACA derivatives was further confirmed by scanning electron microscopy (SEM). SEM micrographs showed that bacteria treated with metallocenyl 7-ACA derivatives feature cell wall damage and morphology changes. Using a CTX-M-14 β-lactamase competition assay based on nitrocefin hydrolysis, we showed that the Rc-7-ACA bound more favorably to CTX-M-14 than its ferrocenyl counterpart, again confirming the superiority of the ruthenocenyl moiety over the ferrocenyl one in interacting with proteins. We also report a 1.47 Å resolution crystal structure of Rc-7-ACA in complex with the CTX-M-14 E166A mutant, an enzyme sharing a similar active site configuration with penicillin-binding proteins, the molecular target of β-lactam antibiotics. These results strengthen the case for the antibacterial utility of the Rc and Fc groups.     

Design of novel FN3 domains with high stability by a consensus sequence approach

The use of consensus design to produce stable proteins has been applied to numerous structures and classes of proteins. Here, we describe the engineering of novel FN3 domains from two different proteins, namely human fibronectin and human tenascin-C, as potential alternative scaffold biotherapeutics. The resulting FN3 domains were found to be robustly expressed in Escherichia coli, soluble and highly stable, with melting temperatures of 89 and 78°C, respectively. X-ray crystallography was used to confirm that the consensus approach led to a structure consistent with the FN3 design despite having only low-sequence identity to natural FN3 domains. The ability of the Tenascin consensus domain to withstand mutations in the loop regions connecting the β-strands was investigated using alanine scanning mutagenesis demonstrating the potential for randomization in these regions. Finally, rational design was used to produce point mutations that significantly increase the stability of one of the consensus domains. Together our data suggest that consensus FN3 domains have potential utility as alternative scaffold therapeutics.     

Specification and site control of the permeability of the cover concrete: The Swiss approach

It is recognized that most damage to reinforced concrete structures is caused by insufficient durability rather than by low strength. In most cases, the quality and thickness of the cover concrete (“covercrete”) determine the service life of the structure. Since the quality of the covercrete is influenced, not only by the mix composition, but also by the placing and curing conditions, it is appropriate to measure the achieved properties on the structure rather than just on separately cast specimens. Swiss Standard SIA 262 on “Concrete Construction” recommends checking the “impermeability” of the cover concrete on site. With that aim, a non‐destructive method to measure the air‐permeability on site has been standardized (SIA 262/1 Annex E). A team of Swiss experts was appointed by the Swiss Federal Highway Administration (ASTRA) to prepare recommendations for specifying, measuring, and assessing the conformity of the air‐permeability kT. This paper describes these recommendations covering: (a) specification of limiting values of kT as function of the exposure class; (b) sampling of the measurement points; (c) testing (including suitable temperature and moisture conditions); (d) evaluation of conformity with specified values; (e) expected impact on service life.