Antithrombins Wibble and Wobble (T85M/K): archetypal conformational diseases with in vivo latent-transition, thrombosis, and heparin activation

The inherent variability of conformational diseases is demonstrated by two families with different mutations of the same conserved aminoacid in antithrombin. Threonine 85 underlies the opening of the main beta-sheet of the molecule and its replacement, by the polar lysine, in antithrombin Wobble, resulted in a plasma deficiency of antithrombin with an uncharacteristically severe onset of thrombosis at 10 years of age, whereas the replacement of the same residue by a nonpolar methionine, antithrombin Wibble, gave near-normal levels of plasma antithrombin and more typical adult thromboembolic disease. Isolated antithrombin Wibble had a decreased thermal stability (Tm 56.2, normal 57.6 degreesC) but was fully stabilized by the heparin pentasaccharide (Tm 71.8, normal 71.0 degreesC), indicating that the prime abnormality is a laxity in the transition of the main sheet of the molecule from the 5- to 6-stranded form, as was confirmed by the ready conversion of antithrombin Wibble to the 6-stranded latent form on incubation. That this transition can occur in vivo was shown by the finding of nearly 10% of the proband's plasma antithrombin in the latent form and also, surprisingly, of small but definitive amounts of latent antithrombin in normal plasma. The latent transition will be predictably accelerated not only by gross mutations, as with antithrombin Wobble, to give severe episodic thrombosis, but also by milder mutations, as with antithrombin Wibble, to trigger thrombosis in the presence of other predisposing factors, including the conformational stress imposed by the raised body temperatures of fevers. Both antithrombin variants had an exceptional (25-fold) increase in heparin affinity and this, together with an increased inhibitory activity against factor Xa, provides evidence of the direct linkage of A-sheet opening to the conformational basis of heparin binding and activation.     

Concurrent use of cocaine and alcohol is more potent and potentially more toxic than use of either alone--a multiple-dose study

BACKGROUND: Simultaneous abuse of cocaine and alcohol is widespread and increasingly detected in patients seeking emergent care. This double-blind, randomized, within-subjects study used a paradigm more closely approximating practices of drug abusers to better understand the pathogenesis of cocaine-alcohol abuse. METHODS: Subjects meeting DSM-IV criteria for cocaine dependence and alcohol abuse participated in three drug administration sessions: four doses of intranasal cocaine (1 mg/kg every 30 min) with oral alcohol (1 g/kg) administered following the initial cocaine dose and a second dose (120 mg/kg) at 60 min calculated to maintain plasma alcohol concentration at approximately 100 mg/dL during cocaine administration; four doses of cocaine/placebo alcohol; four doses of cocaine placebo/alcohol. Pharmacokinetic, physiological, and behavioral effects were followed over 8 hours. RESULTS: Cocaine-alcohol produced greater euphoria and increased perception of well-being relative to cocaine. Heart rate significantly increased following cocaine-alcohol administration relative to either drug alone. Cocaine concentrations were greater following cocaine-alcohol administration. Cocaethylene had a longer halflife with increasing concentrations relative to cocaine at later time points. CONCLUSIONS: Enhanced psychological effects during cocaine-alcohol abuse may encourage ingestion of larger amounts of these substances over time placing users at heightened risk for greater toxicity than with either drug alone.     

Lipoprotein changes and reduction in the incidence of major coronary heart disease events in the Scandinavian Simvastatin Survival Study (4S)

BACKGROUND: The Scandinavian Simvastatin Survival Study (4S) randomized 4444 patients with coronary heart disease (CHD) and serum cholesterol 5.5 to 8.0 mmol/L (213 to 310 mg/dL) with triglycerides < or =2.5 mmol/L (220 mg/dL) to simvastatin 20 to 40 mg or placebo once daily. Over the median follow-up period of 5.4 years, one or more major coronary events (MCEs) occurred in 622 (28%) of the 2223 patients in the placebo group and 431 (19%) of the 2221 patients in the simvastatin group (34% risk reduction, P<.00001). Simvastatin produced substantial changes in several lipoprotein components, which we have attempted to relate to the beneficial effects observed. METHODS AND RESULTS: The Cox proportional hazards model was used to assess the relationship between lipid values (baseline, year 1, and percent change from baseline at year 1) and MCEs. The reduction in MCEs within the simvastatin group was highly correlated with on-treatment levels and changes from baseline in total and LDL cholesterol, apolipoprotein B, and less so with HDL cholesterol, but there was no clear relationship with triglycerides. We estimate that each additional 1% reduction in LDL cholesterol reduces MCE risk by 1.7% (95% CI, 1.0% to 2.4%; P<.00001). CONCLUSIONS: These analyses suggest that the beneficial effect of simvastatin in individual patients in 4S was determined mainly by the magnitude of the change in LDL cholesterol, and they are consistent with current guidelines that emphasize aggressive reduction of this lipid in CHD patients.     

Vasopressin in the forebrain of common marmosets (Callithrix jacchus): studies with in situ hybridization, immunocytochemistry and receptor autoradiography

The distribution of vasopressin (AVP) producing cells, their projections and AVP receptors was examined in the brain of common marmosets (Callithrix jacchus) using in situ hybridization, immunocytochemistry and receptor autoradiography. Clusters of cells labeled for AVP mRNA or stained for AVP immunoreactivity (AVP-ir) were found in the paraventricular (PVN), supraoptic (SON) and suprachiasmatic nuclei (SCN) of the hypothalamus. Scattered AVP producing cells were also found in the lateral hypothalamus and the bed nucleus of the stria terminalis (BST). Neither AVP mRNA-labeled nor AVP-ir cells were detected in the amygdala. Although AVP-ir fibers were evident outside of the hypothalamic-neurohypophyseal tract, a plexus of fibers in the lateral septum, as observed in the rat brain, was not detected. Receptor autoradiography using 125I-linear-AVP revealed specific binding for AVP receptors in the nucleus accumbens, diagonal band, lateral septum, the BST, SCN, PVN, amygdala, anterodorsal and ventromedial nucleus of the hypothalamus, indicating sites for central AVP action in the marmoset brain. Together, these data provide a comprehensive picture of AVP pathways in the marmoset brain, demonstrating differences from rodents in the distribution of cell bodies, fibers and receptors.     

Homeless youth and their exposure to and involvement in violence while living on the streets

Sick building syndrome is the term given to a heterogeneous constellation of symptoms that affects workers in modern mechanically ventilated office buildings. Although the cause is unknown, there is evidence that the local environment of the work station is an important determinant of symptoms. In this study, investigators examined the effect of a new, individually controlled ventilation system on workers' symptoms. Investigators studied two groups of workers in one mechanically ventilated office building: (1) a control group at whose worksite no intervention was made and (2) an intervention group. The intervention consisted of installation of a device that allowed each worker control over the ventilation supplied to his or her worksite. Just before, and 4 and 16 mo after installation of this device, workers completed self-administered questionnaires regarding occurrence of symptoms. The new ventilation system resulted in higher air velocities, more variable temperatures, and higher concentrations of airborne dust and fungal spores. Four months after installation, workers with the new ventilation system reported fewer symptoms that were (a) work-related (p < .05) and that were work-related and frequent (p < .05); in addition, they reported fewer symptoms that reduced their capacity to work (p < .01). Sixteen months after installation, workers with the new device reported fewer symptoms than at baseline (although not as significantly), and they indicated that the indoor air quality improved their productivity by 11%, compared with a 4% reduction of productivity among the control group of workers (p < .001). Investigators concluded that the new ventilation system, which provided the workers with individual control over ventilation, was associated with important and sustained reduction in symptoms.     

Effects of process-control agents on mechanical alloying of nanostructured aluminum alloys

The effects of the process-control agents (PCAs) stearic acid and methanol on the mechanical alloying (MA) of a nanostructured aluminum alloy (Al₉₃Fe₃Ti₂Cr₂) have been investigated. The dependency of the powder-particle sizes, grain sizes, atomic-level strains, lattice parameters, formation of solid solutions, and microstructural evolution of the aluminum alloy on the types of PCAs and their concentrations have been studied using a variety of analytical instruments including X-ray diffraction scanning electron microscopy, and transmission electron microscopy. The results clearly indicate that prevention of excessive cold welding of Al particles can be achieved by the addition of a PCA at the expense of reductions in the grain size, formation rate of solid solutions, and rate of microstructural refinement, all of which are desired in MA of the Al alloy. Furthermore, a PCA that is more effective in preventing excessive cold welding will also impose more hindrance to the MA process. These phenomena have been discussed in the light of the adsorption of the PCA on the metal surface and the lubricating function of the PCA.     

Large-scale parallel arrays of silicon nanowires via block copolymer directed self-assembly

Extending the resolution and spatial proximity of lithographic patterning below critical dimensions of 20 nm remains a key challenge with very-large-scale integration, especially if the persistent scaling of silicon electronic devices is sustained. One approach, which relies upon the directed self-assembly of block copolymers by chemical-epitaxy, is capable of achieving high density 1?:?1 patterning with critical dimensions approaching 5 nm. Herein, we outline an integration-favourable strategy for fabricating high areal density arrays of aligned silicon nanowires by directed self-assembly of a PS-b-PMMA block copolymer nanopatterns with a L(0) (pitch) of 42 nm, on chemically pre-patterned surfaces. Parallel arrays (5 × 10(6) wires per cm) of uni-directional and isolated silicon nanowires on insulator substrates with critical dimension ranging from 15 to 19 nm were fabricated by using precision plasma etch processes; with each stage monitored by electron microscopy. This step-by-step approach provides detailed information on interfacial oxide formation at the device silicon layer, the polystyrene profile during plasma etching, final critical dimension uniformity and line edge roughness variation nanowire during processing. The resulting silicon-nanowire array devices exhibit Schottky-type behaviour and a clear field-effect. The measured values for resistivity and specific contact resistance were ((2.6 ± 1.2) × 10(5)Ωcm) and ((240 ± 80) Ωcm(2)) respectively. These values are typical for intrinsic (un-doped) silicon when contacted by high work function metal albeit counterintuitive as the resistivity of the starting wafer (～10 Ωcm) is 4 orders of magnitude lower. In essence, the nanowires are so small and consist of so few atoms, that statistically, at the original doping level each nanowire contains less than a single dopant atom and consequently exhibits the electrical behaviour of the un-doped host material. Moreover this indicates that the processing successfully avoided unintentional doping. Therefore our approach permits tuning of the device steps to contact the nanowires functionality through careful selection of the initial bulk starting material and/or by means of post processing steps e.g. thermal annealing of metal contacts to produce high performance devices. We envision that such a controllable process, combined with the precision patterning of the aligned block copolymer nanopatterns, could prolong the scaling of nanoelectronics and potentially enable the fabrication of dense, parallel arrays of multi-gate field effect transistors.     

The monounsaturated acyl- and alkyl-moieties of wax esters and their distribution in commercial orange roughy (Hoplostethus atlanticus) oil

Wax esters were isolated from commercial orange roughy (Hoplostethus atlanticus) oil by column chromatography and fractionated by argentation thin layer chromatography. Following transesterification, the resultant fatty acid methyl esters and fatty alcohols were analyzed by gas chromatography. both acyl- and alkyl-moieties were mainly of the monoene structure within the 16∶1–22∶1 range. After derivatization, the positions of the double bonds of even numbered fatty acid and fatty alcohol isomers were located by chromatography-mass spectrometry and compared. Results of these positional analyses indicate that the primary desaturation reactions takes place in the Δ9 position of pre-existing (C₁₄ to C₂₄) acyl chains. It is proposed that acyl components from 18∶1 are subjected to chain elongation to form a mixture of 24∶1 isomers as the final product. Apart from the 24∶1 acyl moiety of the wax esters, in which the double bond was almost exclusively in the Δ15 position, de novo biosynthetic reactions on acids and alcohols appear to yield related acyl- and alkyl-moieties of resynthesized wax esters.     

Characterizing Weave Geometry in Textile Ceramic Composites Using Digital Image Correlation

Techniques for characterizing tow architectures and defects in woven ceramic composites are required for generating high‐fidelity geometric models and subsequently probing effects of defects on composite performance. Although X‐ray computed tomography (CT) has been shown to provide the requisite information with potentially sub‐μm resolution, the technique is inherently limited to probing only small volumes: on the order of a few unit cells of typical weaves. Here, we present an assessment of the efficacy of a complementary 2D technique, based on surface topography mapping via 3‐D (three‐dimensional) digital image correlation (DIC), with potential for ascertaining long‐range features in weaves and defects that cannot be gleaned from CT imaging alone. Upon comparing surfaces reconstructed from CT and DIC data, we find that DIC is capable of resolving surface heights with a root mean square(RMS) error of ~10 μm (about twice the CT voxel size, 4.4 μm) and a spatial resolution of ~20 μm over areas of several cm². Achieving this level of resolution requires use of sufficiently small speckles (~50 μm) and small subset size (~300 μm) relative to the characteristic tow dimensions (~1 mm). The error is somewhat higher (about 20 μm) in areas where surface discontinuities or rapid changes in topography exist (e.g., at tow boundaries).     

Airborne Phase Doppler Interferometry for Cloud Microphysical Measurements

Conducting accurate cloud microphysical measurements from airborne platforms poses a number of challenges. The technique of phase Doppler interferometry (PDI) confers numerous advantages relative to traditional light-scattering techniques for measurement of the cloud drop size distribution, and, in addition, yields drop velocity information. Here, we describe PDI for the purposes of aiding atmospheric scientists in understanding the technique fundamentals, advantages, and limitations in measuring cloud microphysical properties. The performance of the Artium Flight PDI, an instrument specifically designed for airborne cloud measurements, is studied. Drop size distributions, liquid water content, and velocity distributions are compared with those measured by other airborne instruments.