Thermal-energy storage in crosslinked pellets of high-density polythylene for home heating and cooling via off-peak electric power utilization

Electron beam crosslinking of high-denisty polyethylene (HDPE) was studied to obtain pellets for phase-change thermal-energy storage that retain their original shape and form through repeated melt/freeze cycles, and thus “serve as their own container.” Electron-beam voltage, amperage, atmosphere, pellet-bed depth, traverse rate, and total dose were varied to establish cost/effective conditions for adequate thermal from stability combined with highest retention of heat of fusion. The results of electron beam crosslinking are compared with chemical crosslinking in cost and effectiveness. Utility of the electron-beam crosslinked HDPE pellets in a low-cost, efficient pellet-bed heat exchanger was demonstrated. Potential applications discussed include thermal storage for home heating and cooling, industrial processing, and off-peak electric utilization for load leveling.     

Microprocessor-based data acquisition system for respiratory signals

Microprocessors are having an increasing role in online measurements in the medical field instead of large computers because of their compactness, low cost and ease of operation. This paper describes a microprocessor-based data acquisition system representing the primary stage in designing a larger online acquisition and processing system for measurement and correlation of respiratory signals. The system designed has the features of easy communication, flexibility of operation and system's software and hardware. The system uses a mass storage unit for permanent data storage. A detailed discussion of the hardware and software is presented.     

Use of diffusive gradients in thin films to measure cadmium speciation in solutions with synthetic and natural ligands: comparison with model predictions

The performance of the technique of diffusive gradients in thin films (DGT) was characterized in well-defined systems containing cadmium with chloride and nitrate ions, simple organic ligands (nitrilotriacetic acid and diglycolic acid), and Suwannee river fulvic acid for the pH range 5-8. Cd was fully labile in all Cd, Cl-, and NO3- solutions tested (I= 0.1 and 0.01 M), even atvery low Cd concentrations (10 nM), consistent with there being no binding of Cd to the diffusive gel. Diffusion coefficients of Cd-nitritotriacetic acid (NTA) and Cd-diglycolic acid (DGA) species were measured and found to be ca. 25-30% lower than the equivalent coefficient for free metal ions. These values were used to calculate concentrations of labile Cd from DGT measurements in solutions of Cd with NTA or DGA. Cd-NTA and Cd-DGA species were found to be fully DGT-labile. DGT devices that used a diffusive gel with a reduced pore size, which retarded the passage of fulvic acid species through the gel, were used to estimate the proportion of Cd complexed by fulvic acid. These results were compared with predictions of the solution speciation from models with default parameter values. ECOSAT, incorporating the NICA-Donnan model, correctly predicted the magnitude of the binding and its pH dependence, while predictions from WHAM V (with humic ion binding model V) and WHAM 6 (with humic ion binding model VI) were less satisfactory at predicting the pH dependence. Reasonable fits to the data could be obtained from WHAM 6 when the effective binding constant log K(MA) was changed from 1.6 to 1.5, the value of deltaLK1 from 2.8 to 1.0 to minimize the dependence on pH, and the value of deltaLK2 from 1.48 to 1.0 to decrease the strength of the strong bidentate and tridentate binding sites.     

What are the sciences of relationship-centered primary care

Steroidogenic acute regulatory protein (StAR), a 30-kDa protein involved in the transport of cholesterol to inner mitochondrial membrane during stimulation of steroid hormone biosynthesis, has recently been cloned from human adrenals and MA-10 mouse Leydig tumor cells. We examined the regulation of StAR mRNA accumulation upon induction of steroidogenesis in immortalized rat granulosa cells. Granulosa cells were transfected with SV40 DNA alone (POGS5); with SV40 DNA and Ha-ras oncogene (POGRS1); with SV40 DNA, Ha-ras oncogene and LH/CG receptor (GLHR15) or with FSH receptor (GFSHR17) or with the beta 2-adrenergic receptor (G beta 2AR13) expression plasmids. Cells were cultured to confluency and then stimulated for 24 h with oFSH (4 nM), hCG (2.4 nM), isoproterenol (10 microM) or forskolin (50 microM). By quantitative RT-PCR, StAR mRNA was undetectable in non-steroidogenic cells (transfected with SV40 DNA alone, POGS5) either in the presence or in the absence of forskolin. In contrast, variable amount of the message was detected in all steroidogenic cell lines cotransfected with SV40 DNA and Ha-ras. Moreover, an increase in the StAR mRNA expression was evident in all steroidogenic cells upon stimulation with their respective agonists, concomitantly with enhanced progesterone production. The RT-PCR product was sequenced and the 379 base pairs of rat StAR were found to be 93% and 86% identical to mouse and human cDNA, respectively. The deduced 126 amino acid sequence was 95%, 88% and 88% identical to the mouse, human and bovine deduced protein sequences. We conclude that StAR message is expressed only in the steroidogenic rat granulosa cells and can be upregulated by FSH, hCG, isoproterenol and forskolin in the appropriate cell lines. In addition, we find that the rat StAR cDNA exhibit a high degree of homology with the mouse and human sequences.     

The Homothorax homeoprotein activates the nuclear localization of another homeoprotein, extradenticle, and suppresses eye development in Drosophila

The Extradenticle (Exd) protein in Drosophila acts as a cofactor to homeotic proteins. Its nuclear localization is regulated. We report the cloning of the Drosophila homothorax (hth) gene, a homolog of the mouse Meis1 proto-oncogene that has a homeobox related to that of exd. Comparison with Meis1 finds two regions of high homology: a novel MH domain and the homeodomain. In imaginal discs, hth expression coincides with nuclear Exd. hth and exd also have virtually identical, mutant clonal phenotypes in adults. These results suggest that hth and exd function in the same pathway. We show that hth acts upstream of exd and is required and sufficient for Exd protein nuclear localization. We also show that hth and exd are both negative regulators of eye development; their mutant clones caused ectopic eye formation. Targeted expression of hth, but not of exd, in the eye disc abolished eye development completely. We suggest that hth acts with exd to delimit the eye field and prevent inappropriate eye development.     

Electrochemical properties of Pb–Sb, Pb–Ca–Sn and Pb–Co3O4 anodes in copper electrowinning

Three types of anode, Pb–Sb, Pb–Ca–Sn and Pb–Co₃O₄, for copper electrowinning were investigated. The corrosion resistance, as evaluated by cyclic voltammetric (CV) measurements was higher for Pb–Co₃O₄ than for Pb–Sb and Pb–Ca–Sn. During prolonged electrowinning under galvanostatic conditions, the anodic reaction on the Pb–Co₃O₄ anode was depolarized by 0.053 V as compared to Pb–Sb, and by 0.106 V with respect to Pb–Ca–Sn. The composition and structure of the anodic layer were determined by XPS, X-ray and SEM analyses. The surface layer on the three anodes examined was composed mainly of PbSO₄, -PbO₂ and -PbO₂. Different structure of the surface layer was observed: loose and highly spread coral-like structure in the case of Pb–Sb; fibrous structure in the case of Pb–Ca–Sn and dense, fine-grained structure in the case of Pb–Co₃O₄.     

Differences in Diffusion Charging of Dielectric and Conducting Ultrafine Aerosols

The effect of the dielectric constant on unipolar and bipolar charging rates is investigated. This effect is manifested through the image potential. Bulk dielectric constants of aerosol materials range from 2.5 to 50. The corresponding image potentials range from about 40% to about 96% of the image potential for a perfect conductor. Charging simulations were carried out for this parameter range and typical results are presented. For dielectric constants greater than 2.5 the charging behavior shows a strong image potential effect, and may be approximated by calculations for a perfect conductor. This suggests that charging models that do not allow for image potential effects are likely to be inaccurate except, perhaps, for larger particles, where the Coulomb potential dominates the image potential. The simulations are compared with unipolar charging data from recent experiments, which tend also to support this conclusion.     

Influence of substrate bias, deposition temperature and post-deposition annealing on the structure and properties of multi-principal-component (AlCrMoSiTi)N coatings

Nitride films are deposited from a single equiatomic AlCrMoSiTi target by reactive DC magnetron sputtering. The influence of the substrate bias and deposition temperature on the coating structure and properties are investigated. The bias is varied from 0 to − 200 V while maintaining a substrate temperature of 573 K. And the temperature is changed from 300 to 773 K whilst maintaining a substrate bias of − 100 V. From X-ray diffraction analysis, it is found that all the as-deposited coatings are of a single phase with NaCl-type FCC structure. This is attributed to the high mixing entropy of AlN, CrN, MoN, SiN, and TiN, and the limited diffusion kinetics during coating growth. Specific aspects of the coating, namely the grain size, lattice constant and compressive stress, are seen to be influenced more by substrate bias than deposition temperature. In fact, it is possible to classify the deposited films as large grained (~ 15 nm) with a reduced lattice constant (~ 4.15 Å) and low compressive residual stresses for lower applied substrate biases, and as small grained (~ 4 nm) with an increased lattice constant (~ 4.25 Å) and high compressive residual stresses for applied biases of − 100 V or more. A good correlation between the residual stress and lattice constant under various deposition conditions is found. For the coatings deposited at − 100 V, and at temperatures above 573 K, the hardness could attain to the range of 32 to 35 GPa.Even after annealing in vacuum at 1173 K for 5 h, there is no notable change in the as-deposited phase, grain size or lattice constant of the coatings but an increase in hardness. The thermal stability of microstructure is considered to be a result of the high mixing entropy and sluggish diffusion of these multi-component coatings. For the anneal hardening it is proposed that the overall bonding between target elements and nitrogen is enhanced by thermal energy during annealing.     

Oxidation Hardening Kinetics of the Rheological Function G′/(η′/G′) in Asphalts

Abstract

The authors used 9 asphalts oxidized at various temperatures and pressures to determine the hardening kinetics for the DSR function, an easily measured and meaningful surrogate for 15°C ductility that relates well to age-related binder deterioration. For each asphalt, there is a rapid initial period that slows to a constant rate period. This constant rate period can be represented by carbonyl formation (oxidation) rate times a hardening susceptibility (HS). For the DSR function and viscosity, the HS and initial jump were pressure- but not temperature-dependent. The DSR function initial jump was relatively higher than the viscosity initial jump.