Minimizing Concentration Effects in Water-Based,Laminar-Flow Condensation Particle Counters

Concentration effects in water condensation systems, such as used in the water-based condensation particle counter, are explored through numeric modeling and direct measurements. Modeling shows that the condensation heat release and vapor depletion associated with particle activation and growth lowers the peak supersaturation. At higher number concentrations, the diameter of the droplets formed is smaller, and the threshold particle size for activation is higher. This occurs in both cylindrical and parallel plate geometries. For water-based systems, we find that condensational heat release is more important than vapor depletion. We also find that concentration effects can be minimized through use of smaller tube diameters, or more closely spaced parallel plates. Experimental measurements of droplet diameter confirm modeling results.

© 2013 American Association for Aerosol Research     

Sampling of Carbon Fiber Aerosols

This paper describes theoretical and experimental studies undertaken in connection with the problem of sampling carbon fiber aerosols in an ambient environment. Calculations indicate that carbon fiber aerosols with an 8-μm fiber diameter and a density of 1.8 g/cm³ can be sampled by a sampler designed to collect particles in the 10–30–μm aerodynamic diameter range if fibers up to a few millimeters in length are to be collected. An approach is then described in which carbon fiber aerosols are collected in the impactor of the inlet of a dichotomous sampler. Experimental data are presented showing that the impaction characteristics of the carbon fiber aerosol can be predicted with a reasonable degree of accuracy by approximating the shape of the fibers by a prolate ellipsoid.     

Comparison of Particle Size Distributions at Urban and Agricultural Sites in California's San Joaquin Valley

As part of the California Regional PM _2.5 and PM ₁₀ Air Quality Study (CRPAQS) particle size distributions were measured simultaneously at two sites; the city of Fresno and the agricultural site of Angiola. Reported here are data obtained by scanning mobility analysis over the size range from 10 nm to 400 nm for the intensive study period from December 1, 2000 through February 6, 2001. These high time resolution data show variability in the character of the distributions, as well as the in the total number concentrations. The most pronounced feature of the data set is a consistent, nighttime maxima in particle number concentrations with a modal diameter near 80 nm during the evening hours at the urban Fresno site. Although these maxima are correlated with CO, NO, and black carbon, the particle size is larger than the 30–40 nm modal diameters observed for traffic aerosols during the commute hours, and is attributed to a non-vehicle source. At the agricultural site, the morning maxima particle number concentration coincides with the maxima in NO concentration, but often precedes the morning maxima in black carbon. Values for the geometric mean particle diameter varied from day to day, but are correlated between the two sites, with somewhat larger particle sizes at Angiola during periods of stagnation.     

Investigation of Refractory Black Carbon-Containing Particle Morphologies Using the Single-Particle Soot Photometer (SP2)

An important source of uncertainty in radiative forcing by absorbing aerosol particles is the uncertainty in their morphologies (i.e., the location of the absorbing substance on/in the particles). To examine the effects of particle morphology on the response of an individual black carbon-containing particle in a Single-Particle Soot Photometer (SP2), a series of experiments was conducted to investigate black carbon-containing particles of known morphology using Regal black (RB), a proxy for collapsed soot, as the light-absorbing substance. Particles were formed by coagulation of RB with either a solid substance (sodium chloride or ammonium sulfate) or a liquid substance (dioctyl sebacate), and by condensation with dioctyl sebacate, the latter experiment forming particles in a core-shell configuration. Each particle type experienced fragmentation (observed as negative lagtimes), and each yielded similar lagtime responses in some instances, confounding attempts to differentiate particle morphology using current SP2 lagtime analysis. SP2 operating conditions, specifically laser power and sample flow rate, which in turn affect the particle heating and dissipation rates, play an important role in the behavior of particles in the SP2, including probability of fragmentation. This behavior also depended on the morphology of the particles and on the thermochemical properties of the non-RB substance. Although these influences cannot currently be unambiguously separated, the SP2 analysis may still provide useful information on particle mixing states and black carbon particle sources.

Copyright 2015 American Association for Aerosol Research     

Computational modeling of furnace sorbent injection for SO2 removal from coal-fired utility boilers

Furnace sorbent injection (FSI) is used to remove SO₂ formed during coal combustion by injecting sorbent into the high temperature zone of a furnace above the fireball. FSI is cost effective for older coal-fired boilers, especially when space or capital budgets are limited. To optimize the design and performance of FSI, an SO₂/sorbent modeling scheme that simultaneously considers calcination (or dehydration), sintering, and sulfation has been developed and implemented. It is coupled with a three-dimensional combustion model based on computational fluid dynamics to determine the most desirable locations for sorbent injection and to optimize the amount of sorbent needed to achieve a targeted SO₂ removal efficiency. A sensitivity analysis was conducted to determine the effect of flue gas temperature, particle diameter, and SO₂ concentration on the extent of sulfation. This SO₂/sorbent sub-model was applied to a 126-MW front-wall fired boiler firing eastern bituminous coal. The SO₂ removal efficiencies predicted by the model agreed well with those measured in the field. The modeling results indicated that sorbent injected directly into the furnace through boosted over-fired air ports is more effective at removing SO₂, due to longer residence time and better mixing, relative to ports higher in the furnace with poor mixing. This modeling approach is optimized for full-furnace application to facilitate the design process.     

Ecosystem,Location, and Climate Effects on Foliar Secondary Metabolites of Lodgepole Pine Populations from Central British Columbia

Lodgepole pines, Pinus contorta Douglas ex Louden var. latifolia Engelm. ex S. Watson, are encountering increased abiotic stress and pest activity due to recent increases in temperature and changes in precipitation throughout their range. This tree species counters these threats by producing secondary metabolites, including phenolics and terpenoids. We examined foliar levels of lignin, soluble phenolics, monoterpenoids, sesquiterpenoids, and diterpenoids in 12 stands in British Columbia, Canada. We used these data to assess associations among foliar secondary metabolite levels and ecosystem, geographic, and climatic variables. Regressions were also performed to observe which combinations of variables best explained secondary metabolite variance. Stands of P. c. latifolia in the Coastal Western Hemlock and Interior Cedar/Hemlock biogeoclimatic zones had consistently greater foliar levels of almost all measured secondary metabolites than did other stands. Lignin was present in greater amounts in Boreal White/Black Spruce ecosystem (i.e., northern) stands than in southern stands, suggesting a role for this metabolite in pine survival in the boreal forest. Attempts to develop regression models with geographic and climatic variables to explain foliar secondary metabolite levels resulted in multiple models with similar predictive capability. Since foliar secondary metabolite levels appeared to vary most between stand ecosystem types and not as much due to geographic and climatic variables, metabolic profiles appeared best matched to the stress levels within local environments. It is unknown if differences in secondary metabolite levels are the result of genetic adaptation or phenotypic plasticity, but results from this and other studies suggest that both are important. These results are interpreted in light of ongoing efforts to assist in the migration of certain populations of P. c. latifolia northward in an effort to counter predicted effects of climate change.     

Modelling the solubility in Bayer liquors: A critical review and new models

An accurate and tractable model of solubility is a pre-requisite for any careful study of precipitation. Reviewing the abundant literature on the sodium aluminate solutions and Bayer Liquor, the authors point out the need for a new model for the apparent solubility of aluminium in actual Bayer Liquors and propose such a model, based on the well established Wesolowski's expression for the infinite dilution solubility and extended Debye–Hückel expression including a large empirical b I term for the “activity coefficient effect”. They suggest a chemical interpretation for this feature.     

(±)-Catechin,A Root Exudate of the Invasive <Emphasis Type="Italic">Centaurea Stoebe</Emphasis> Lam. (Spotted Knapweed) Exhibits Bacteriostatic Activity Against Multiple Soil Bacterial Populations

Understanding the effects of allelopathic plant chemicals on soil microorganisms is critical to understanding their ecological roles and importance in exotic plant invasion. Centaurea stoebe Lam. (spotted knapweed), an aggressive invasive weed in North America, secretes a racemic mixture of (±)-catechin as a root exudate. This enantiomeric, polyphenolic compound has been reported to have allelopathic effects on surrounding flora and microflora. To better understand how catechin affects microbial communities in the root zone of spotted knapweed, we assessed its impact on the total culturable bacterial component and numerous individual bacterial populations from Romanian (native range) and Montana (invaded range) soils. Catechin suppressed total culturable count numbers from the bacterial community and inhibited growth of some, but not all, soil bacterial populations tested. The native soil bacterial community was significantly more resistant to inhibitory effects of catechin than either the invaded or non-invaded soils. We further show that the inhibitory effect of catechin on nine different soil bacterial strains from seven genera was reversible, demonstrating that it acts via a bacteriostatic rather than bactericidal mechanism. These findings suggest that catechin might affect bacterial community composition and activity in the root zone.     

Oxidative stress: the role of cytochromes P450 in oxygen activation

Oxidative stress is associated with a number of degenerative disease states, such as cancer and AIDS. Fundamental to oxidative stress is the generation of superoxide, peroxide and other reactive oxygen species (ROS). This review focuses on the importance of cytochrome P450 (CYP) enzymes in the activation of oxygen and ROS generation, together with a discussion of defence mechanisms which can offer protection against oxidative stress. © 2002 Society of Chemical Industry.     

Digital Simulation of a High-Performance AC Drive System?Part I

With the advent of solid-state devices, various methods have been devised to use induction motors for variable-speed drives. Most of these schemes use a variable-frequency source; that is, the power is supplied through a cycloconverter or inverter to the induction motor. However, the voltage obtained by such methods does not have a sinusoidal waveshape. To predict the performance, therefore, we have to simulate the system using either an analog or digital computer. A method to simulate digitally a drive system consisting of a cycloconverter connected to a constant three-phase sinusoidal voltage source and an induction motor is given.