Mental health supplement to the Ontario Health Survey: methodology

OBJECTIVE: To describe the methodology of a province-wide, cross-sectional, epidemiologic study of psychiatric disorder among those aged 15 years and over living in household dwellings in Ontario. METHOD: Respondents for the survey were drawn from households (N = 13002) participating in a province-wide health survey. One person per household was selected, and 9953 (76.5%) participated. RESULTS: Participants and nonparticipants were similar to each other. An extensive array of data, including measures of psychiatric disorder classified using a revised version of the Composite International Diagnostic Interview (CIDI), are available for all respondents. CONCLUSIONS: The Ontario Health Supplement is contained in a public-use data file at the Ontario Ministry of Health and is available to investigators for study. A strong survey design, careful measurement, and acceptable levels of response provide the rationale for our inviting researchers to access and use the Ontario Health Supplement data base.     

The sub-rating channel assignment strategy for PCS hand-offs

A new personal communications services (PCS) hand-off scheme is proposed. This scheme provides for hand-off to radio ports on which there is no free channel by “sub-rating” an existing connection. With sub-rating, an occupied full-rate channel is temporarily divided into two half-rate channels: one to serve the existing call and the other to serve the hand-off request. The blocking probabilities (combined forced terminations of existing calls and blocking of new call attempts) of this new scheme compare favorably with the standard scheme (nonprioritizing) and the previously proposed prioritizing schemes. The costs for this scheme are presented and discussed, as well as the additional procedural complexity of implementing on-the-fly sub-rating and the impact of continuing the conversation on a lower rate channel (which may lower speech quality of increase battery drain). Analytical models and simulations investigating the traffic impacts are presented, as are the results that show that even in the highest offered load considered a 3-min conversation in the busy hour experiences less than half a second of sub-rated conversation on average and only about 3% of the calls experience more than 5.12 s of sub-rated conversation. This scheme can increase capacity by 8-35% for systems with 1% call incompletion probability     

用红外热象技术研究有凸台热源倾斜板的散热

本文介绍红外热象技术在工程热物理研究中某些应用的探索。作为实例，通过热象技术，实验研究了具有水平凸台离散热源的倾斜板的散热，在研究它的自然对流换热部份结合利用激光全息干涉技术。此间着重于分析倾斜角对散热的影响。     

Principles for radiation of time-harmonic elementary current in magnetized electron plasma half-space

The radiation emitted by a time-harmonic elementary current in magnetized electron plasma half-space, bounded by an ideal electric plane, is investigated using an exact formulation. It is found that: conventional image principle holds for vertical magnetization case; while for parallel magnetization case, coupled image principle seems to be valid.     

测井声波波形与声源的特性有关

根据推导出的圆管状压电换能器在各种激励电压信号作用下的声源函数和谱函数以及声波测井正演问题研究出的石油井孔中任意一点上的声波公式,用计算机技术模拟出了相应的测井记录声波全波列,并将它们输入到声波全波列测井处理程序中进行处理。正演模拟结果和处理结果表明,测井记录的声波全波列不但与所测地层的性质有关,而且与声源的特性有关,声源特性对测井记录的声波全波列的质量有一定的影响。     

Sliding wear of Al2O3P/6061 Al composite

The mild sliding wear behaviour of a 15 vol % Al₂O_3P/6061 Al composite has been investigated by using a pin-on-disc reciprocating sliding machine. The composite has been shown to exhibit an excellent wear resistance as compared to the unreinforced matrix alloy. The wear rate of the composite under dry wear conditions with a 12N load is approximately one tenth of that in the 6061 aluminium alloy. The wear rate of the composite under lubrication with 15W/40 gear oil under a 100N load is only one thousandth ofthat in the 6061 aluminium alloy.The dry wear resistance of an over-aged sample is shown here to be better than a peak aged or under-aged sample when the composite was aged at 160°C. The coefficient of friction of the composite was approximately 0.5–0.6 under dry conditions and 0.07 in lubricated wear experiments.In the initial stage, the worn surface of the composite under dry conditions is primarily composed of ploughed grooves and ductile tear. The composite makes a conducting contact with the steel pin. The worn surface is composed of compacted powder and the contact potential gradually increases when the period of the wear experiment goes beyond 2 h.     

峒室爆破CAD设计方法研究

本文对峒室爆破断面布药计算机辅助设计参数驱动方法进行了探讨围绕断面布药主要参数的变化，提出一种基于参数驱动的计算机辅助设计方法，利用ｗｉｎｄｏｗｓ操作系统下的动态数据交换特性，对断面布药进行布药参数优化，实现了交互调整布药，形成一套断面布的计算机软件，为工程爆破设计实现计算机提供了一种可行的方法。     

Pentacene-based organic thin-film transistors

Organic thin-film transistors using the fused-ring polycyclic aromatic hydrocarbon pentacene as the active electronic material have shown mobility as large as 0.7 cm²/V-s and on/off current ratio larger than 10⁸; both values are comparable to hydrogenated amorphous silicon devices. On the other hand, these and most other organic TFT's have an undesirably large subthreshold slope. We show here that the large subthreshold slope typically observed is not an intrinsic property of the organic semiconducting material and that devices with subthreshold slope similar to amorphous silicon devices are possible     

An approach to the identifiable parameters of a manipulator

This article deals with the minimal parameters of a manipulator in the least squares sense, so that the minimal parameters are equivalent to the identifiable parameters. The least squares concept is used to introduce terminology for the minimal linear combinations (MLCs) of the system parameters that define a set of linear combinations of the system parameters. The number of elements of the set is minimal, yet the set still completely determines the system. Furthermore, it is shown that the problem of finding a set of MLCs of a manipulator can be simplified to that of finding two individual sets of MLCs that determine the entries of the inertia matrix and the gravity load. Although the approach is applied to the inertia constants of composite bodies to obtain a set of MLCs identical to an earlier one, the result is newly interpreted in the least squares sense. The approach itself is a new method for finding the identifiable parameters of a manipulator, and it yields some new insight into the manipulator dynamics. The crucial feature is that a set of MLCs found by using the present approach is guaranteed to be identifiable. The earlier approaches always require an identification method to verify the results. An equivalence theorem is also presented that rigorously states the equivalence between the different sets of minimal parameters. © 1994 John Wiley & Sons, Inc.     

马来酸酐在乙丙橡胶上的接枝共聚

马来酸酐在乙丙橡胶上的接枝共聚,用过氧化苯甲酰为引发剂的效果优于偶氮二异丁腈。研究了温度、马来酸酐用量和引发剂用量等对接枝率的影响。用红外光谱和薄层色谱证明了接枝物的存在。用接触角技术测定了接枝物的表面性能。