Synthesis and aggregate formation of poly(styrenesulfonate)-b-poly(ethylene glycol)-b-poly(styrenesulfonate) triblock copolymers in aqueous solution induced by binding with aluminum ions

Summary  Well-defined water-soluble poly(styrenesulfonate)-b-poly(ethylene glycol)-b- poly(styrenesulfonate) (PSS-b-PEG-b-PSS) triblock copolymers with narrow molecular weight distribution (1.29 < M_w/M_n < 1.36) were synthesized in aqueous solution at 70 ^oC via reversible addition-fragmentation chain transfer (RAFT) polymerization. The complex formed by the PSS-b-PEG-b-PSS triblock copolymer coordinated with aluminum ion was investigated with turbidimetry, dynamic light scattering (DSL), zeta-potential, and transmission electron microscopy (TEM). The aggregation formation was based on the neutralization of the SO₃^- groups in the PSS blocks with Al³⁺ ions. The appearance, size and stability of the PSS-b-PEG-b-PSS/Al³⁺ aggregates were controlled by varying the PSS block length and degree of neutralization (DN). At DN = 0.33, where the PSS-b-PEG-b-PSS copolymer was completely neutralized with Al³⁺, the aggregate size increased with increasing PSS block length. The transition from the shrinking coil of small size to the interchain aggregates of large size was found at DN of about 0.33.     

高能球磨FeCo+MnO的结构与磁性研究

用高能球磨采用两种方案制备了FeCo MnO体系,并用X射线衍射和振动样品磁强计对其结构和磁性质做了分析.发现采用直接氧化Mn而得到MnO的方法,所得体系的MnO较纯;而通过分解MnCO3得到MnO的体系,MnO纯度较低,有较多Mn3O4杂质,两种方法制备的FeCo MnO体系的矫顽力和剩磁比都比单纯FeCo体系的增加很多,且前一种方法比后一种方法制备的FeCo MnO体系的矫顽力和剩磁比较大.然后研究了球磨时间及退火处理对FeCo MnO体系矫顽力及剩磁比的影响,发现球磨时间为120h体系的矫顽力和剩磁比最大;经过退火处理后,体系的矫顽力和剩磁比都有较大幅度的增加.     

热老化聚丙烯薄膜宏观力学性能及微观结构的研究

通过对热老化处理的聚内稀薄膜进行X射线衍射实验.对测得的实验数据采用X射线衍射线形分析理论处理,同时对热老化聚丙烯薄膜进行拉仲形变测量,得到材料的力学性质和微晶尺寸及内部点阵畸变的变化规律.从而将热老化聚丙烯材料宏观性质变化与微观结构联系起来,找出材料聚集态精细结构随老化时问而改变的微观规律.     

黑白电视机的电磁兼容设计

本文结合我厂μPC三片机的设计布局,探讨黑白电视机电路的电磁兼容设计。通过理论计算,提出中放屏蔽材料选择的理论依据。     

转炉溅渣层与镁碳砖炉衬的结合机理

通过对生产现场带有溅渣层的转炉炉衬残砖和试验室小型坩埚溅渣试验结果进行矿相显微结构分析、研究，确定了溅渣层的矿相组成、溅渣层与ＭｇＯ－Ｃ砖结合区域的矿相结构及坩埚溅渣层自上而下的矿相分布规律，并根据矿相结构分析中观察到的烧结层、结合层和溅渣层３个区域，提出了溅渣层与镁碳砖炉衬的结合机理为化学结合、机械镶嵌与化学烧结结合及冷凝结合３种形式。     

与性能相关的容错计算系统可靠性指标

对于某些容错计算系统，由于成功与故障之间没有明确的界限，用传统的可靠性指标难以准确地评价其容错性能，为此一些学者提出了若干与性能相关的可靠性指标。本文将这些指标概括成三类（即基于瞬时性能的指标、基于累积收益的指标和率模可靠性指标）加以介绍，并简要介绍了它们的求解方法。     

Intraocular concentrations of chemotherapeutic agents after systemic or local administration

OBJECTIVES: To investigate the concentrations of carboplatin and etoposide achieved in the aqueous and vitreous humors after intravenous infusion in nonhuman primates, and to investigate whether local administration of carboplatin might result in higher concentrations in the vitreous humor. METHODS: Macaca fascicularis primates were treated with 1 of 3 regimens: (1) intravenous carboplatin (18.7 mg/kg), etoposide (5 mg/kg), and vincristine sulfate (0.05 mg/kg), (2) peribulbar carboplatin (10 mg/mL), or (3) episcleral balloon carboplatin (10 mg/mL). Concentrations of chemotherapeutic agents were measured in the plasma and in the aqueous and vitreous humors. RESULTS: No measurable amount of etoposide was detected in the aqueous or vitreous humor after intravenous administration. Mean measured peak vitreous concentration of carboplatin after intravenous administration was 0.31 microg/mL, which was 1% of the peak plasma value. Mean measured peak vitreous concentrations of carboplatin after peribulbar or episcleral balloon administration were 2.38 microg/mL and 2.95 microg/mL, respectively, which represent 7.68- and 9.52-fold increases over the concentration achieved after intravenous administration. No serious toxic effect was observed in any animal. CONCLUSIONS: Peribulbar and episcleral balloon administration of carboplatin seemed to be safe and resulted in higher vitreous concentrations than intravenous administration in this model. These results suggest that these alternate routes of delivery should be explored in children with vitreous seeding of retinoblastoma.     

本钢烧结矿冷却及其余热回收的试验研究

从烧结矿冷却并回收其余热的角度出发，介绍了利用烧结机尾落矿空间，采用喷吹空气装置对烧结矿进行冷却的小型模拟试验，从测出的结果来看，有可能成为一种新的烧结矿冷却方式。     

连续流动分析仪应用于水中硫化物的测定

对连续流动法测定硫化物进行初步探讨和研究。同时与其他几种测定硫化物的方法进行了比较。实验结果表明，连续流动法对硫化物分析在线性、稳定性、最低检测限、准确性和精密度等方面均优于其他方法。