Synthesis, miscoding specificity, and thermodynamic stability of oligodeoxynucleotide containing 8-methyl-2'-deoxyguanosine

8-Methyl-2'-deoxyguanosine (8-MedG) was synthesized by reacting dG under the methyl radical generating system and incorporated into oligodeoxynucleotides using phosphoramidite techniques. The site-specifically modified oligodeoxynucleotide containing a single 8-MedG was then used as a template for primer extension reactions catalyzed by the 3' --> 5' exonuclease-free (exo-) Klenow fragment of Escherichia Coli DNA polymerase I and mammalian DNA polymerase alpha. Primer extension catalyzed by the exo- Klenow fragment readily passed the 8-MedG lesion in the template while that catalyzed by pol alpha was retarded opposite the lesion. The fully extended products formed during DNA synthesis were analyzed to quantify the miscoding specificities of 8-MedG. Both DNA polymerases incorporated primarily dCMP, the correct base opposite the lesion, along with small amounts of incorporation of dGMP and dAMP. In addition, two-base deletion was observed only when the exo- Klenow fragment was used. The thermodynamic stability of 8-MedG in the duplex was also studied. The duplex containing 8-MedG:dG was more thermally and thermodynamically stable than that of dG:dG. The duplex containing 8-MedG:dA was more thermodynamically stable than that of dG:dA. We conclude that 8-MedG is a miscoding lesion and capable of generating G --> C and G --> T transversions and deletion in cells.     

Effect of composition and promoters in Au/TS-1 catalysts for direct propylene epoxidation using H2 and O2

A series of Au/titanium silicalite-1 (TS-1) catalysts with different Si/Ti ratios and promoted with alkali and alkaline earth cations were prepared by deposition–precipitation (DP) and tested for direct propylene epoxidation. It was found that the gold loading and catalytic activity was highly dependent on the pH of the DP synthesis solution and the final composition of the catalyst. Addition of Group 1 metals such as K or Cs had little effect on the gold content, but increased activity, while Group 2 metals such as Mg, Ca, Sr, and Ba increased both the gold content and the catalytic activity. The highest improvement was provided by a Mg promoted catalyst, which at 443 K and 0.1 MPa with a H₂/O₂/C₃H₆/Ar = 1/1/1/7 feed mixture gave a propylene oxide (PO) formation rate of 88 gPO h⁻¹ kg_cat⁻¹, compared to 57 gPO h⁻¹ kg_cat⁻¹ for an unpromoted catalyst, corresponding to a 50% enhancement of activity. Ammonia temperature-programmed desorption (NH₃-TPD) measurements indicated little change in adsorption amount with promotion indicating that the yield increase was not due to the elimination of acidic sites on the catalyst. Instead, the improved catalytic performance was ascribed to increased Au capture efficiency and dispersion by the catalyst. The effect of Si/Ti ratio, pH of synthesis, and the promoter ions on the gold content could be understood from their effect on the surface charge of the support.     

Pressure-induced tin whisker formation

This paper presents a fundamental assessment of pressure-induced tin whisker formation. A creep-based tin whisker model was developed to explain experimental data as well as data from industrial studies. A grain boundary diffusion model was then developed to predict a maximum whisker length. It is shown that creep properties obtained from samples can be used to screen plating finishes susceptible to tin whiskering. This enables a manufacturer to assess tin whisker risks prior to volume production.     

Key reliability concerns with lead-free connectors

This paper presents the key reliability issues of lead-free connectors. The paper first discusses electrical contact resistance of lead-free and lead-based solder-dipped contacts under various aging conditions. Then, the fretting corrosion of lead-free contacts is discussed. Finally, the reliability due to tin whiskers induced by mating pressure between connector contact elements is presented.     

The activation of furfuryl alcohol polymerization by oxygen and its enhanced mechanical properties

The effect of oxygen and additional oxygen providers on furfuryl alcohol polymerization was investigated through chemical analyses and mechanical evaluation. NMR, UV–vis, Fourier transform infrared, and gas chromatography–mass spectrometry (GC–MS) results suggested that atmospheric oxygen and the further addition of an oxygen source functioned as an activator for the entire network polymerization. Interestingly, the construction of a conjugated structure on the furan linear chain, which is key to three-dimensional cross-linking, also appears to be accelerated in the presence of oxygen. Furthermore, the introduction of oxygen providers into the curing system successfully enhanced the mechanical properties of the cured furan resin.     

Plastic behaviours during tempering by crystal plasticity analyses using fast Fourier transform

ABSTRACT

Heat treatment, such as quenching and carburising, often involves volume change caused by phenomena such as thermal expansion, phase transformation, and carbide precipitation during tempering. During the tempering process, an external force induces additional plastic deformation. The authors termed this phenomenon ‘tempering plasticity’. In this study, we performed crystal plasticity analysis using fast Fourier transform considering the volume change in carbides to assess the mechanism of tempering plasticity. As a result, tempering plastic strain occurred as the volume fraction of carbide increased, and the tempering plastic phenomenon could be reproduced based on the transformation model proposed by Greenwood–Johnson. The result supports the idea that the volume change accompanied by carbide precipitation is an important mechanism that invokes tempering plasticity.     

In-situ TEM on (de)hydrogenation of Pd at 0.5-4.5 bar hydrogen pressure and 20-400°C

We have developed a nanoreactor, sample holder and gas system for in-situ transmission electron microscopy (TEM) of hydrogen storage materials up to at least 4.5 bar. The MEMS-based nanoreactor has a microheater, two electron-transparent windows and a gas inlet and outlet. The holder contains various O-rings to have leak-tight connections with the nanoreactor. The system was tested with the (de)hydrogenation of Pd at pressures up to 4.5 bar. The Pd film consisted of islands being 15 nm thick and 50-500 nm wide. In electron diffraction mode we observed reproducibly a crystal lattice expansion and shrinkage owing to hydrogenation and dehydrogenation, respectively. In selected-area electron diffraction and bright/dark-field modes the (de)hydrogenation of individual Pd particles was followed. Some Pd islands are consistently hydrogenated faster than others. When thermally cycled, thermal hysteresis of about 10-16 °C between hydrogen absorption and desorption was observed for hydrogen pressures of 0.5-4.5 bar. Experiments at 0.8 bar and 3.2 bar showed that the (de)hydrogenation temperature is not affected by the electron beam. This result shows that this is a fast method to investigate hydrogen storage materials with information at the nanometer scale.     

Novel flexible network polymers consisting of oligomeric primary polymer chains originated in the mechanistic discussion of multiallyl crosslinking polymerization

Summary It is well known that allyl monomers polymerize only with difficulty and yield polymers having low molecular weights, i.e., oligomers. Inevitably, free-radical multiallyl crosslinking polymerization provides network polymers consisting of oligomeric primary polymer chains, i.e., having abundant dangling chains. This led to the development of novel flexible network polymers such as amphiphilic network polymers (I) consisting of short primary polymer chains and long crosslink units with opposite polarities, simultaneous interpenetrating networks (II) consisting of both polyurethane (PU) and polymethacrylate (PM) networks with oligomeric primary polymer chains, and network polymers (III) consisting of centipede-type primary polymer chains. Thus, the solution copolymerizations of benzyl methacrylate with tricosaethylene glycol dimethacrylate in the presence of lauryl mercaptan yielded I consisting of nonpolar, short primary polymer chains and polar, long crosslink units. The opposite type of I was prepared by the copolymerization of 2-hydroxyethyl methacrylate, a polar monomer having a hydroxyl group, with heneicosapropylene glycol dimethacrylate, a nonpolar monomer having a poly(oxypropylene) unit. The equimolar polyaddition crosslinking reaction of poly(methyl methacrylate-co-2-methacryloyloxyethyl isocyanate) with tri(oxytetramethylene) glycol, leading to PU networks, and the free-radical crosslinking copolymerization of methyl methacrylate with tri(oxytetramethylene) dimethacrylate in the presence of CBr₄, leading to PM networks, were progressed simultaneously, providing II formed via the topological crosslink between PU and PM network structures. The post-copolymerizations of oligomeric allyl methacrylate/alkyl methacrylate precopolymers, having different amounts of pendant allyl groups and different molecular weights, with allyl benzoate/vinyl benzoate monomer mixtures were conducted to give III.     

Electron microscope studies of nano-domain structures in Ru-based magneto-superconductors: RuSr(2)Gd(1.5)Ce(0.5)Cu(2)O(10-delta) (Ru-1222) and RuSr(2)GdCu(2)O(8) (Ru-1212)

Microstructures of the RuSr(2)Gd(1.5)Ce(0.5)Cu(2)O(10-delta) (Ru-1222) and RuSr(2)GdCu(2)O(8) (Ru-1212) magneto-superconductors have been investigated by using selected-area electron diffraction, convergent-beam electron diffraction, dark-field electron microscopy and high-resolution electron microscopy at room temperature. Both Ru-1212 and Ru-1222 consist of nm-size domains stacked along the [Formula: see text] direction, where the domains are formed by two types of superstructures due to ordering of rotated RuO(6) octahedra about the c-axis. In Ru-1212, both primitive-and body-centered tetragonal superstructures (the possible space groups: P4/mbm and I4/mcm) are derived to form the corresponding nm-domains. It is of great interest that Ru-1212 consists of domains of two crystallographically different superstructures, while the similar domains observed in Ru-1222 have crystallographically identical superstructure with an orthorhombic symmetry (possible space group: Aeam), related by 90 degrees rotation around the c-axis (Yokosawa et al., 2003, submitted for publication).