ZnO nanowire growth by electric current heating method: A study on the effect of substrate temperature

In this study, we report the growth of ZnO nanowire on quartz glass substrates with Au-catalyst assistance by electric current heating of ZnO ceramic bar. The effect of substrate temperature on the properties of ZnO nanostructures has been investigated systematically. Structural analysis indicates that the grown ZnO crystals belong to hexagonal phase with preferential growth along (0 0 2) orientation. Scanning electron microscopic studies reveal the aligned ZnO nanowires were grown at 800 °C. The typical length and diameter of nanowires are in the uniform ranges of 4–20 μm and 20–100 nm, respectively, showing their high aspect ratio of about 1000. We have made an attempt to discuss about the change in ZnO nanostructures with different substrate temperatures and the possible mechanism for the growth of nanowires. Optical reflectance studies show the infrared reflectivity was controlled through the substrate temperature.     

Oxidative Neurodegeneration Is Prevented by UCP0045037, an Allosteric Modulator for the Reduced Form of DJ-1, a Wild-Type of Familial Parkinson��s Disease-Linked PARK7

Although a loss-of-function mutation has been identified in familial Parkinson’s disease PARK7, the wild-type of DJ-1 is known to act as an oxidative stress sensor in neuronal cells. Recently, we identified UCP0045037 as a compound that bound to the reduced form of DJ-1 by in silico virtual screening. In this study, we determined the neuroprotective effects of UCP0045037 against focal cerebral ischemia-induced neurodegeneration in rats. Hydrogen peroxide-induced cell death was significantly inhibited by UCP0045037 in both rat mesencephalic dopaminergic neurons and human normal SH-SY5Y cells. In contrast, DJ-1-knockdown SH-SY5Y cells lost the protective activity of UCP0045037. These results suggest that UCP0045037 interacts with endogenous DJ-1 and produces a neuroprotective response.     

Toward integrated product and process life cycle planning—An environmental perspective

Life cycle engineering (LCE) is a key concept for promoting environmentally sustainable practices among manufacturing firms. A major hurdle in the implementation of LCE is the lack of a systematic and strategic method to design or plan an entire product life cycle. To address this issue, this keynote provides a framework for life cycle development and proposes the concept of life cycle planning. This paper aims to provide explicit and systematic methodologies for life cycle planning by reviewing this research area. Practical cases that employ life cycle planning are also illustrated. Finally, some research directions are suggested.     

Experimental study on the effect of surface conditions on evaporation of sprayed liquid droplet

The present study investigates experimentally the effects of thermal properties of the hot surface and droplet characteristics on the droplet evaporation. Cylindrical blocks made of Stainless Steel, Aluminum and Brass with different degrees of surface roughness were used. The droplet diameter and velocity were controlled independently. The behavior of droplet during the collision with hot surface was observed with a high-speed camera. The results presented the effect of the thermal properties of the hot surface, droplet Weber number, droplet velocity, droplet size, hot surface conditions; surface superheat and degree of surface roughness on the solid–liquid contact time and the maximum spread of droplet over the surface. Empirical correlations have been deduced describing the relationship between the hydrodynamic characteristics of an individual droplet impinging on a heated surface and concealing the affecting parameters in such process. Also, the comparison between the current results and the results due to others investigators shows good agreement in which the difference between them ranged from 5% to 25%.     

Analysis of Field Orientation Control of Current Source Inverter Drive Induction Motor Systems

The field orientation control of current source inverter (CSI) drive induction motor (IM) systems has been known to give an induction motor dc motorlike characteristics. As a result of an analysis, the characteristic of these systems does not necessarily coincide with that of dc motor systems, especially with light loads. The result of the analysis is verified by experiments.     

Angle dependence of signal currents from cylindrical ionisation chambers

A signal current from a cylindrical ionisation chamber with an ionisation volume of 62.7 cm3, 40 mm in diameter and 50 mm long, peaked when the chamber was lixed at 0 degrees and at 90 degrees in 137Cs and 60Co gamma ray fields for source-chamber distances of 1 m and 2 m. A smaller ionisation chamber showed a small peak at 0 degrees in both fields but not at 90 degrees. However, calculations indicated that the signal current from the smaller chamber would also show a peak at 90 degrees in a 137Cs point-source gamma ray field. Peaks occur because gamma rays attenuate along the cylindrical side wall or along the end walls when a chamber is tilted slightly from 0 degrees or 90 degrees and the direction of the gamma ray beam agrees with the plane of one of these walls. These facts suggest the need for care in the common practice of measuring and calculating responses for cylindrical ionisation chambers fixed perpendicular to gamma ray beams.     

Electrical treeing in hexagonal ice crystals under applied impulse voltage

Using two hexagonal samples of ice, polycrystalline and single-crystalline, the electrical treeing has been investigated under an applied impulse voltage. The crystallinity and temperature of the ice play an important role in the events of the treeing. In the single-crystalline ice, the tree in the samples at -25 /spl deg/C always progressed along the basal plane of the ice crystal, but at -196 /spl deg/C, it progressed along the c-axis. These distinctive patterns of the tree progression were attributed to the crystal axis dependence on the electrical conductivity and the relative permittivity at each temperature. The current accompanying the trees were detected by means of an electro-optic coupling with light emitting diodes and photodiodes. After the large current pulses which occur just after voltage application, small intermittent current pulses were visible in the wave tail of the applied voltage. These intermittent pulses appear to generate by the movement of accumulated charges after the formation of tree channels. The electrical breakdown strength of ice at -25 C was large for the electric field parallel to the c-axis of the single-crystalline ice.     

Metabolic fate of orally administered enzymatically synthesized glycogen in rats

We developed a new process for enzymatically synthesized glycogen (ESG), which is equivalent in physicochemical properties to natural-source glycogen (NSG) except its resistant property to degradation by α-amylase in vitro. In this study the metabolic fates of orally administered ESG in rats were investigated by a single oral administration test and a 2 week ingestion test. The glycemic index of ESG was 79. After the 2 week ingestion of ESG, the cecal content and production of short chain fatty acids were significantly increased, the pH value of cecal content was lowered, and the counts of Bifidobacterium and Lactobacillus in feces were significantly increased. Additionally, plasma levels of triacylglycerol and total cholesterol were significantly reduced by ESG. In contrast, NSG did not affect these parameters at all. The results collectively suggest that around 20% of orally administered ESG was transferred to the cecum in the form of polymer and assimilated into short chain fatty acids by microbiota and the polymer affected lipid metabolism.     

Fabrication of Translucent ZrO2 Film by a Modified Doctor Blade Method

Dense, translucent ZrO₂ (stabilized by Y₂O₃) films were made by a modified doctor blade method. Loosely coagulated ceramic powders left after decomposition of methylcellulose film were pressed onto polystyrene films to densify the powder compact. The films were heated at 1700°C in air. The thickness of the films was ∼100 μm. Very few grain boundaries appeared along the direction perpendicular to the film surface.     

Local resection of pulmonary lesions by Nd-YAG laser without suturing

Local excision of 67 pulmonary lesions in 5 patients was performed with the Nd-YAG laser. There were 2 women and 3 men with an average age of 68 years. The patients consisted of three cases of metastatic lung cancer (65 lesions), one hamartoma (One lesion) and one organized pneumonitis (one lesion). The lesion was first enucleated by a contact method using an Nd-YAG laser scalpel, then the crater of the resected lesion in the normal lung tissue was coagulated with a defocused laser beam. The craters of 52 of the 67 resected lesions which were shallow seated in the lung were left open, but the other 15 resected lesions were closed with sutures. Total blood loss was less than 100 ml. There was no bleeding or air leakage (30 cm water pressure) during the post operative days in 4 of the 5 patients, but one patients (one lesion) had to be treated by bronchoscopic endobronchial embolization against a persistent air leak. This lesion was 2.5 cm in diameter and 4 cm deep in the lung on CT. The other lesions were also measured by CT. The tumor size was 1.4 +/- 0.7 cm and the depth was 2.4 +/- 1.0 cm. The Nd-YAG laser is very suitable for local resection of peripheral lung lesions without suturing.