Effect of surface-modifying macromolecules and solvent evaporation time on the performance of polyethersulfone membranes for the separation of chloroform/water mixtures by pervaporation

Polyethersulfone (PES) membranes using different evaporation periods were fabricated by the phase-inversion method. Pervaporation experiments were conducted for chloroform/water mixtures to determine the selectivity of the PES membranes. It was found that chloroform could be concentrated in the permeate from chloroform/water binary feed mixtures by PES membranes prepared using longer evaporation periods, and that the selectivity of PES membranes in pervaporation could be reversed by shorter evaporation periods. This study also showed that by adding surface-modifying macromolecules (SMM) up to 1 wt % into the casting solution, chloroform enrichment in the permeate could be increased by 50%. Chloroform enrichment increased with increasing SMM concentration until an optimal value, after which the enrichment decreased. © 1994 John Wiley & Sons, Inc.     

Temperature Dependence of the Raman Spectrum in Lithium Oxide Single Crystal

Temperature dependence of the Raman spectrum of lithium oxide single crystal has been measured over a temperature range of 80 to 1073 K. The frequency shift and the line width of the Raman spectrum in lithium oxide were about 531 and 4.5 cm^-1 at 80 K, respectively. At 1073 K, the frequency shift and the line width attained the values of 464 and 112 cm^-1, respectively. The strong temperature dependence of the frequency shift and line width was compared with data from some crystals with a fluorite structure.     

Series resonant ZCS‐PFM DC‐DC power converter with high‐frequency high‐voltage transformer link for high‐power magnetron drive

This paper presents a single lossless inductive snubber‐assisted ZCS‐PFM series resonant DC‐DC power converter with a high‐frequency high‐voltage transformer link for industrial‐use high‐power magnetron drive. The current flowing through the active power switches rises gradually at a turned‐on transient state with the aid of a single lossless snubber inductor, and ZCS turn‐on commutation based on overlapping current can be achieved via the wide range pulse frequency modulation control scheme. The high‐frequency high‐voltage transformer primary side resonant current always becomes continuous operation mode, by electromagnetic loose coupling design of the high‐frequency high‐voltage transformer and the magnetizing inductance of the high‐frequency high‐voltage transformer. As a result, this high‐voltage power converter circuit for the magnetron can achieve a complete zero current soft switching under the condition of broad width gate voltage signals. Furthermore, this high‐voltage DC‐DC power converter circuit can regulate the output power from zero to full over audible frequency range via the two resonant frequency circuit design. Its operating performances are evaluated and discussed on the basis of the power loss analysis simulation and the experimental results from a practical point of view. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 79–87, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20126     

Multiobjective dynamic load-dispatching method for optimal operation of power systems

A new practical method is proposed which gives a quasi-optimal solution of the dynamic load-dispatching problem formulated by a multiconstraint multiobjective optimization problem. Here, the multiple constraints are rate reserve constraints and power flow ones, and the multiple objectives are fuel cost and CO₂ emission. The proposed method is an integration of the following three techniques: (1) “Group Dispatch Scheme,” which is developed by the authors, is used to satisfy a violated constraint easily. This scheme consists of three steps. The first step is to classify all generators into two groups. One is the group which should be more loaded to satisfy the violated constraint, and the other is the should-be less loaded group. The second step is to add some load to the former group, and to subtract the same load from the latter. The third step is to dispatch each group load to each groups generators, respectively; (2) the dynamic load-dispatching algorithm is used which provides, in practical time, quasi-optimal generation trajectories; (3) the conventional weighting parametric method is used to obtain a Pareto optimal solution of multiobjective problems. The effectiveness of the method is clarified by a computer simulation on the actual power system of Kansai Electric Power Company.     

Sintering of fibrous barium titanate powder compacts with preferred orientation

The sintering of fibrous BaTiO₃ powder particles was investigated. Special emphasis was given to the role of particle orientation in the compact on densification and microstructure development. Compacts were made by dry-pressing. During the initial stage of sintering, the fibrous particles rearranged and bundles of particles were formed. The volume of pores between bundles of particles decreased on further heating. Grain growth started when the sintered density reached ca. 56% of the theoretical density. Higher temperatures of sintering increased the degree of the crystal axis orientation. Thus, highly orientated sintered bodies with high densities were prepared by heating at 1500 °C.     

Fabrication of blue-light emission fused-silica substrates by using Si-ion implantation and high-temperature annealing

We fabricated fused-silica substrates which emit blue light by using Si-ion implantation and high-temperature annealing. Photoluminescence peak wavelengths are around 400 nm, and the peak intensities can be remarkable after annealing above 1150 °C.     

Twin-Related Tetragonal Variants in Yttria Partially Stabilized Zirconia

Crystals of yttria partially stabilized zirconia were grown by the arc-image floating-zone technique and studied by transmission electron microscopy. Crystals annealed at 1700°C consist of tetragonal precipitates and a cubic matrix. The platelike domains in a precipitate are twin-related tetragonal variants stacked alternately parallel to the (011) twin plane. The axial relations between the tetragonal precipitate and the cubic matrix are [100]_tetragonal|[100]_cubic, [011]_tetragonal|[011]_cubic.     

Premixed flame propagating into a narrow channel at a high speed, part 2: Transient behavior of the properties of the flowing gas inside the channel

The behavior of a premixed flame propagating from a chamber into a narrow channel at a high speed was examined using high speed and instantaneous schlieren photography, ion current measurement with electrostatic probes, and temperature measurement with an optical method. From detailed measurements of flames passing through the channel, flame extinguishment in the channel, no matter whether transient or not, was found to occur due to quenching of the reacting gas by rapid turbulent mixing with cold fresh mixture at the downstream of the contraction region and by heat transfer to the cold channel walls. Extinguishment must occur when these heat losses exceed the heat released by the chemical reaction of the flowing mixture.     

Autonomic nervous function of the patients with neurally mediated syncope

Although diagnosis of neurally mediated syncope (NMS) using head-up tilt (HUT) test has been established, the exact mechanism of NMS has not yet been elucidated. We evaluated beta and alpha-adrenergic function in NMS patients by pharmacological autonomic function test. The alpha-adrenergic sensitivity of NMS patients was significantly lower than that of control subjects. The patients who need low dose isoproterenol for provocation of syncope showed higher beta-adrenergic sensitivity than patients who developed syncope without isoproterenol. Thus, pharmacological autonomic function test was useful for evaluation of NMS patients.