Modification of LLDPE using esterified styrene maleic anhydride copolymer: Study of its properties and environmental degradability

Linear low‐density polyethylene (LLDPE) was blended with decanol‐esterified styrene maleic anhydride copolymer (MDESMA) with an aim to enhance the environmental degradability of polyethylenes. Styrene‐maleic anhydride copolymer (SMA) was synthesized by precipitation polymerization, using benzoyl peroxide (BPO) as initiator. SMA was esterified with a long‐chain monoalcohol, n‐decanol, using methyl ethyl ketone (MEK) as solvent at 80°C to obtain monoesterified styrene‐maleic anhydride (MDESMA). Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimeter (DSC), and thermogravimetric analysis (TGA) were performed to characterize SMA and MDESMA. IR spectra of MDESMA showed a decrease in intensity of peak responsible for carbonyl absorption of a five‐membered ring anhydride group along with broadening of carboxyl O? H stretching peak. TGA showed two‐stage degradation for SMA and MDESMA. LLDPE was blended with MDESMA in single‐screw extruder and blends were characterized thermally by DSC and TGA. A single endothermic melting peak of LLDPE/MDESMA blend was observed. Films of the blends, formed by compression molding, showed an increase in modulus of elasticity but a decrease in elongation at break with increasing concentration of MDESMA. LLDPE/MDESMA blend compositions when kept in phosphate/citric acid buffer solution (pH ～ 8) showed initial weight gain because of water absorption and subsequently loss in weight due to dissolution of soluble component of blends. Film samples of blends kept for soil burial also showed similar behavior. Contact‐angle measurement of film samples of the blends showed an increase in value on soil burial, indicating degradation/dissolution of MDESMA. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 102–108, 2004     

Effect of steam environment on severe core damage behaviour for VVER-1000 with the ASTEC V1 code

Severe accident studies for very low frequency events for VVER-1000 (V320) are carried out to estimate in-vessel damage progression under steam-rich and starved conditions. The analyses with code ASTEC, jointly developed by IRSN (France) and GRS, Germany), have shown the influence of steam environment on core heat-up followed by material relocation, hydrogen production, vessel failure and aerosol generation along with release to containment. Hydro-accumulator injection for studied transients also gives rise to a steam-rich environment enhancing the material oxidation depending on the injection time and period. The generated information along with PSA-Level 2 is helpful to decide Plant Damage State (PDS) and fruitfully develop accident management strategies for the plant.     

A brief review of the ionic conductivity enhancement for selected oxide electrolytes

The advantages of lowering the operation temperature of SOFCs have attracted great interest worldwide. One of the major barriers to decreasing the operation temperature is the ohmic loss of the electrolyte. Maximizing the electrolyte ionic conductivity is of significant importance, especially in the absence of new electrolyte materials. The ionic conductivity of electrolytes can be influenced by many parameters. There has been an enormous effort in the literature for the improvement of the electrolyte ionic conductivity. From a practical point of view, this paper reviews various approaches to enhancing the ionic conductivity of polycrystalline zirconia- and ceria-based oxide electrolytes in the light of composition, microstructure, and processing. Suggestions are given for future work.     

Multi-electrode microbial fuel cell (MEMFC): A close analysis towards large scale system architecture

Microbial fuel cells are capable of producing electricity through the treatment of wastewater, however, the low power density poses main hurdles towards their wide application. In present work, microbial fuel cell based on multiple anodes, acting as baffle is constructed for achieving higher performance which can be scaled up for real life application. It is investigated for continuous sixty two days using distillery wastewater (WW) in three batches under ambient condition. During first batch, the WW is maintained under stagnant condition inside the anode chamber where as in the rest of the two batches WW is recirculated in the chamber. A maximum power density 427 mW m⁻², is achieved under stagnant condition which is further enhanced to 597 mW m⁻² under recirculation mode. Recirculation of WW reduces the internal resistance arising from the mass transfer by 50%. Maximum COD removal and Coulombic efficiency obtained is 43% and 23%. Biofouling on the surface of the membrane facing anode chamber is observed.     

Ionic liquid-based deep eutectic solvents as novel solvent-cum-catalyst media for thermal dehydrogenation of chemical hydrides

The current work explores the usage of novel synthesized Deep Eutectic Solvent (DES) as a catalyst cum solvent media for the thermal dehydrogenation of chemical hydrides, namely Ammonia Borane (AB) and Ethylene diamine bisborane (EDAB). In the first instance, the quantum chemistry based COSMO-SAC (COnductor like Screening MOdel Segment Activity Coefficient) model was used for the selection of the pertinent solvent. 1-Butyl-3-methylimidazolium methanesulfonate: Imidazole ([BMIM][MeSO₃]:[Im]) turned out to be an ideal eutectic mixture with the highest predicted solubility with amine boranes. The DES was synthesized by combining the Hydrogen Bond Acceptor (HBA), namely 1-Butyl-3-methylimidazolium methanesulfonate and Imidazole as Hydrogen Bond Donor (HBD) at a molar ratio of 1:2 and T = 70 °C. The formation of DES was confirmed by recording the NMR spectra. Further, the thermal dehydrogenation study was performed at a vacuum of 4 × 10^?2 mbar (gauge pressure) of AB/DES and EDAB/DES systems at 105 °C, where a hydrogen equivalent of 1.40 and 2.55 was produced, respectively. The residual samples were further analyzed through ¹H NMR analysis for the reaction mechanism and to confirm the role of Ionic Liquid-based DES as catalyst cum solvent media.     

Microstructure,hardness, toughness and abrasive wear resistance of 16.0 wt. % chromium white iron after continuous and cyclic destabilisation treatment

Destabilisation of as-cast chromium white iron with 16 wt-% chromium are performed by continuous destabilisation treatment for 4 h and short duration (0.66 h) cyclic destabilisation treatment at 900, 950, 1000, 1050, and 1100 °C. Continuous destabilisation causes secondary carbides precipitation from austenite which on slow cooling transforms to pearlite matrix. Cyclic destabilisation treatment causes similar precipitation of finer secondary carbides following shorter period austenitisation and a matrix containing martensite and retained austenite on forced-air cooling. After continuous destabilisation, hardness falls below the as-cast value (HV622); whereas it rises to HV950 after cyclic destabilisation treatment. The as-cast notched impact toughness (4.0 J) increases to 8.5 J or more after both continuous and cyclic destabilisation at 1050 and 1100 °C. Abrasive wear resistance after continuous destabilisation improves only at higher wear load (49.0 N), while after cyclic destabilisation it supersedes the as-cast and Ni-Hard IV performance at both low (19.6 N) and high (49.9 N) wear load.     

Isolation and identification of phosphate‐solubilizing microorganisms and distribution of orthophosphate in different seasons from sewage‐fed East Kolkata Wetland

This study focused on isolation and identification of possible phosphate‐solubilizing bacteria (PSB ) from the sewage‐fed East Kolkata Wetland (EKWL ), a prospective water resource for pisciculture. In addition, different limnological parameters have been correlated with orthophosphate and seasonal variations. PSB have been isolated in Pikovskaya medium and identified morphologically and biochemically and finally analysed by 16S rDNA gene sequence. Limnological studies involving temperature (potentiometric), pH (potentiometric), dissolved oxygen (iodometric), ammonia‐nitrogen (spectrophotometric) and orthophosphate (spectrophotometric) concentrations were conducted. The results of this study established the presence of Bacillus megaterium , a potential PSB in EKWL . The activity of B. megaterium is also supported by the seasonal orthophosphate variations. The changes in concentration of other limnological parameters were also prominent. The water quality parameters of temperature (r  = 0.886), dissolved oxygen (r  = 0.729) and ammonia‐nitrogen (r  = 0.396) concentrations exhibited a positive correlation with orthophosphate and a negative correlation with pH (r  = ?0.699). The B. megaterium obtained in this study, exhibited a significant alteration in regard to orthophosphate content and relationships with other factors. Further experiment on the soluble phosphorus solubilization potential of B. megaterium revealed the biological availability of phosphorus was increased by threefold after 120 hr of incubation, with the decreasing pH value, although the phytase activity was 0.419 U/ml. PSB have a vital function in plant nutrition in supplying phosphate, essential nutrients and its uptake results in appropriate functioning and metabolism of different aquatic plants and organisms. PSB are competent biofertilizer to amplify aquaculture production for sustainable development.     

Supporting inheritance hierarchy changes in model-based regression test selection

Software and Systems Modeling - Models can be used to ease and manage the development, evolution, and runtime adaptation of a software system. When models are adapted, the resulting models must be...