中国铸造市场的气候与机遇

我国近几年铸件产量统计；国内工业用户需求和使用铸件数量；中国进出口状况，综述了我国铸造行业所采用的主要生产工艺，调查了部分具有典型代表性的工厂其生产成本构成，依据现有资料分析，旨出我国是铸件生产的大国，却不是铸件生产强国，提出了今后5年中国铸造市场展望，以及对铸件产量估计，市场展望和投资前景，抓住机遇，大展宏图。     

THERMAL STABILITY OF THE MECHANICALLY ALLOYED Al－10Ti NANOCRYSTALLINE ALLOY DURING CONSOLIDATION PROCESS

ＴＨＥＲＭＡＬＳＴＡＢＩＬＩＴＹＯＦＴＨＥＭＥＣＨＡＮＩＣＡＬＬＹＡＬＬＯＹＥＤＡｌ－１０ＴｉＮＡＮＯＣＲＹＳＴＡＬＬＩＮＥＡＬＬＯＹＤＵＲＩＮＧＣＯＮＳＯＬＩＤＡＴＩＯＮＰＲＯＣＥＳＳＬｉａｎｇＧｕｏｘｉａｎ；ＬｉＺｈｉｃｈａｏ；ＷａｎｇＥｒｄｅ（...     

PRIMARY RECRYSTALLIZATION TEXTURES OF 70-30 BRASS ROLLED BY CROSS SHEAR ROLLING IN SINGLE DIRECTION

ＰＲＩＭＡＲＹＲＥＣＲＹＳＴＡＬＬＩＺＡＴＩＯＮＴＥＸＴＵＲＥＳＯＦ７０－３０ＢＲＡＳＳＲＯＬＬＥＤＢＹＣＲＯＳＳＳＨＥＡＲＲＯＬＬＩＮＧＩＮＳＩＮＧＬＥＤＩＲＥＣＴＩＯＮ￥ＺｈａｏＸｉａｎｇ；ＬｉｕＹａｎｓｈｅｎｇ；ＸｕＪｉａｚｈｅｎ；ＬｉａｎｇＺ...     

钇离子注入AZ31镁合金的氧化行为

研究了AZ31镁合金在钇离子剂量为5×10^16，1×10^17及5×10^17ions／cm^2注入条件下的氧化性能。纯氧气氛、500℃下的氧化实验结果表明，钇离子注入能提高AZ31镁合金的抗氧化性能，而且随着注入剂量的增大，合金表面抗氧化性能提高越大。俄歇电子能谱（AES）和X光电子能谱（XPS）分析表明：钇离子注入以后，在镁合金表面形成了具有双层结构的氧化层，外层主要由MgO组成，而内层主要由Y2O3，MgO构成。这一新形成的氧化层有利于提高AZ31镁合金的抗氧化性能。     

COUPLED SIMULATION OF 3D ELECTRO-MAGNETO-FLOW FIELD IN HALL-HEROULT CELLS USING FINITE ELEMENT METHOD

Two full 3D steady mathematical models are developed by finite element method （FEM） to calcalate coupled physics fields. the electro-magnetic model is built and solved first and so is the fluid motion model with the acquired electromagnetic force as source body forces in Navier-Stokes equations. Effects caused by the ferromagnetic shell, busbar system around, and open boundary problem as well as inside induced current were considered in terms of the magnetic field. Furthermore, a new modeling method is found to set up solid models and then mesh them entirely with so-called structuralized grids, namely hex-mesh. Examples of 75kA prebaked cell with two kinds of busbar arrangements are presented. Results agree with those disclosed in the literature and confirm that the coupled simulation is valid. It is also concluded that the usage of these models facilitates the consistent analysis of the electric field to magnetic field and then flow motion to the greater extent, local distributions of current density and magnetic flux density are very much dependent on the cell structure, the steel shell is a shield to reduce the magnetic field and flow pattern is two dimensional in the main body of the metal pad.     

工艺参数对合成ZnO／Ag纳米复合抗菌剂产率的影响

通过正交实验，研究了反应温度、反应时间、反应物配比对ZnO／Ag纳米复合抗菌剂合成产率的影响规律。获得了高产率合成ZnO／Ag纳米复合抗菌剂的优选工艺条件：反应温度为10～25℃，ZnSO4与NH4HCO3的摩尔比为1：2-2．5，ZnSO4与NH4HCO3的反应时间为2．5～3h，AgNO3与NH4HCO3的摩尔比为1：1．5～2，反应时间为0．5h，ZnO／Ag的产率超过98％。XRD、TEM和SAED结果表明：ZnO／Ag纳米复合抗菌剂为具有纤锌矿结构的ZnO和立方结构的Ag组成。粒径为15～25nm，分散性较好。     

PVC塑料的超声焊接强度试验研究

采用正交实验方法，对常用的硬聚氯乙烯塑料（PVC）的超声焊接主要工艺参数进行试验研究，提出了针对焊接强度的最佳工艺参数组合。     

涂层硬质合金回收料生产硬质合金的工艺探索

利用废旧涂层硬质合金回收料生产硬质合金,通过采用适当的工艺方法,可以生产出质量较好的再生硬质合金产品。     

硅酸铝短纤维铝基复合材料耐磨性研究

本文研究了以硅酸铝短纤维作增强体，工业纯铝L00，铸造铝合金ZL101为基体的复合材料耐磨性。并与以颗粒状Al_2O_3为增强体进行对比。结果表明：硅酸铝纤维／ZL101复合材料的耐磨性为ZL101的321倍。在相同摩擦条件下，基体相同的铝基复合材料，以硅酸铝短纤维作增强体较以颗粒Al_2O_3为增强体有着更高的耐磨性。应用摩擦理论推导了磨损方程■与实测吻合。     

钛合金表面等离子喷涂制备ZrO2─Ti系功能梯度涂层

研究了等离子喷涂法制备ＺｒＯ２Ｔｉ系功能梯度涂层。结果表明，采用等离子喷涂工艺制备功能梯度涂层是可行的，涂层与基体除以机械咬合方式结合外，还存在着少量冶金化学反应结合，添加Ｎｉ／Ａｌ和ＳｉＯ２有助于提高涂层的结合强度