超宽带无线通信技术概述

主要介绍了超宽带(UWB)无线通信技术的起源、概念及其基本工作原理，包括信号产生、系统构成、天线、接收机、调制方式等，阐述了UWB中的关键技术及性能特点，对UWB的局限性作了简要的介绍。     

A hexane solution deposition of SnS2 films from tetrabutyltin via a solvothermal route at moderate temperature

SnS₂ films have been deposited on glass and alumina plate substrates by the reactions between an organotin precursor [tetrabuyltin, (CH₂CH₂CH₂CH₃)₄Sn] and carbon disulfide in n-hexane at the temperature range 180-200 °C for 10-40 h. The reaction system was oxygen free and applied at a moderate temperature. The films so prepared were characterized by techniques of X-ray diffraction, Scanning electron microscopy, Raman and Mössbauer spectroscopies. The films deposited on glass as well as on alumina plate have an average thickness of 30 μm, but have different rose-like morphologies, which are influenced by both the anisotropic growths of crystals and the different substrate structures. Photoluminescence measurements show that the films have an emission peak at approximately 590 nm.     

Cr12MoV钢冷挤压成形模强化工艺的研究

针对Crl2MoV钢冷挤压成形模热处理存在的质量问题，对加热温度和方式进行了大量的试验研究，在此基础上，提出了改进的快速加热工艺。结果表明，经该工艺处理后，模具使用寿命得到显提高。     

丙烯酸酯与甲基丙烯酸酯的共聚及性能研究

采用悬浮聚合法，以丙烯酸－２－乙基－己酯与甲基丙烯酸十二酯为单体，合成了共聚型高吸油性树脂。研究了共聚单体的配比、交联剂用量、引发剂用量诸因素对高吸油性树脂的性能影响。制得的树脂可以吸其自身质量的１１．８倍的煤油、１４．７倍的苯、６．５倍的泵油。     

横波速度各向异性初步探讨：—多波勘探资料的应用

在纵波、SH 型横波资料处理和解释过程中,我们发现四川 HBC 地区地下介质普遍存在方向各向异性。当横波通过方向各向异性介质时,分裂成两个波:一个波的偏振方向与裂缝平行,叫快横波;另一个波的偏振方向与裂缝走向垂直,叫慢横波。采用相应的观测和处理方法,便可获得快横波和慢横波剖面。根据同一界面的快、慢横波的旅行时可以求得各向异性系数。同样,还可以利用 SH 波与转换波的速度比求取各向异性系数。各向异性系数的大小,反映了裂缝的发育程度。如果野外作了 X、Y 分量观测,室内又作了坐标旋转处理,那么,就可以进一步确定裂缝带的方向。如果未作上述工作,也可以根据构造线走向,大致确定裂缝带的发育方向。     

Thermal decomposition and micropore formation in PEK,PEEK and PES

At strain rates greater than about 10 the deformation of polymers is an adiabatic process which can lead to the generation of very high localized temperatures. These may be well in excess of the temperatures required for thermal decomposition of the polymer to occur. It is speculated that gaseous products arising from such decomposition may act as the source of microcavities and craze initiators. Experiments are described in which the thermal decomposition reaction parameters of polyetherketone, polyetheretherketone, and polysulphone are measured using differential scanning calorimetry and thermogravimetric analysis, and the decomposition products analysed by mass spectrometry. The results indicate that the proposed mechanism could act as a source of micropores with total pore volumes amounting to several per cent of the material volume.     

天然糖甙类化合物^13C—NMR位移范围规律的计算机解析方法

本文从糖甙类化合物的数据特点出发,用较严格的数学推导总结出原则上适用于任何类型的~(13)C-NMR 图谱化学位移范围规律计算机自动解析的方法,并从多方面说明了该方法的研究及实现对实际的~(13)C-NMR 图谱解析工作的意义和重要作用。     

锆钡镧铝氟化物玻璃的分相研究

本文综述了氟化物玻璃中的分相研究。在前人研究基础上应用透射电镜，X射线能谱，电子能量损失谱及X射线衍射，差热分析等研究了锆钡镧铝氟化物玻璃中的液-液分相，发现此种现象普遍存在于该类玻璃之中。对玻璃成分与分相形貌及微观结构之间的关系、对析出晶相种类及分相与析晶的相互影响进行了研究。提出欲降低氟化物玻璃的光损耗，分相与析晶一样是不容忽视的因素。     

Co-evolution as a computational and cognitive model of design

Co-evolutionary design has been developed as a computational model that assumes two parallel search spaces: the problem space and the solution space. The design process iteratively searches each space using the other space as the basis for a fitness function when evaluating the alternatives. Co-evolutionary design can also be developed as a cognitive model of design by characterizing the way in which designers iteratively search for a design solution, making revisions to the problem specification. This paper presents the computational model of co-evolutionary design and then describes a protocol study of human designers looking for evidence of co-evolution of problem specifications and design solutions. The study shows that co-evolutionary design is a good cognitive model of design and highlights the similarities and differences between the computational model and the cognitive model. The results show that the two kinds of co-evolutionary design complement each other, having strengths in different aspects of the design process. Electronic Publication