Self-assembly of a silica-surfactant nanocomposite in a porous alumina membrane

A mesoporous membrane composed of nanochannels with a uniform diameter has a potential use for precise size-exclusive separation of molecules. Here, we report a novel method to form a hybrid membrane composed of silica-surfactant nanocomposite and a porous alumina membrane, by which size-selective transport of molecules across the membrane becomes possible. The nanocomposite formed inside each columnar alumina pore was an assembly of surfactant-templated silica-nanochannels with a channel diameter of 3.4 nm; the channel direction being predominantly oriented along the wall of the columnar alumina pore. Molecules could be transported across the membrane including the silica-surfactant nanocomposite with a capability of nanometre-order size-exclusive separation. Our proposed membrane system has a potential use not only for separation science, but also catalysis and chip technologies.     

Defect levels in chromium-doped silicon

The transient capacitance technique has been used to study the chromium-related levels in the silicon band gap. Chromium was diffused at temperature of 1100 and 1150°C for 0.5 and 3 hr. Five different levels at E_c?0.11 eV, E_c?0.21 eV, E_c?0.28 eV, E_c?0.36 eV and E_c?0.45 eV were obtained from the Arrheniu plots of the electron thermal-emission rates. The number of levels in the upper half of the band gap decreased from five to two with an increase of Cr-diffusion period. Two levels were located at E_c?0.20 eV (donor) and E_c?0.43 eV (acceptor). A donor level was also observed at E_v + 0.25 eV. The donor level was not affected by the diffusion condition. The majority carrier capture cross sections of the three dominant levels have been measured by the transient capacitance technique modified by the pulse transformer. The values were σ_n = 4.1 × 10^?15 cm² for the upper donor at E_c?0.20 eV, σ_n = 2.0 × 10^?16 cm² for the acceptor at E_c ?0.43 eV and σ_p = 9.1 × 10^?18 cm² for the lower donor at E_v + 0.25 eV, and were independent of temperature. The three dominant levels are due to distinct chromium centers.     

Pulsed laser irradiation impact on two marine diatoms Skeletonema costatum and Chaetoceros gracilis

The ability of pulsed laser irradiations to cause damage on the biofouling organisms is recently being investigated. If this technique is employed in industries such as power generation wherein a large quantity of water is being used for the cooling purpose, many organisms other than the targeted would get affected. In this study, we have investigated the damage caused by the pulsed laser irradiations from an Nd:YAG laser (fluence 0.1J/cm(2)) for varying durations such as 2, 5, 10, 30, 60 and 300 s on two marine diatom species namely Skeletonema costatum and Chaetoceros gracilis. Upon exposure to low power laser irradiations, these diatom species showed mortalities between 52.6+/-9.3% to 97.7+/-3.1% in the case of S. costatum and 57.8+/-2.5% to 98.9+/-0.6% in the case of C. gracilis for 2 and 300 s of irradiations, respectively. The mortality increased with the increase in the duration of laser irradiation. The estimation of the chlorophyll a concentration in the irradiated samples showed a considerable reduction varying between 9.8% and 57% in C. gracilis and 3% and 70.3% in S. costatum for 2 and 300 s of irradiations, respectively. The laser-survived cells grew as the non-irradiated (control) samples. C. gracilis frustules were broken by the laser whilst, the cell materials were drained out of the frustules in the case of S. costatum. The study therefore showed that the low power pulsed laser irradiations could cause significant damage on the two species of planktonic diatoms.     

Induction of TNF-alpha production from human peripheral blood monocytes with beta-1,3-glucan oligomer prepared from laminarin with beta-1,3-glucanase from Bacillus clausii NM-1

We prepared a beta-1,3-glucan oligomer (DP> or = 4) from laminarin (DP: 25-30) derived from Laminaria digitata with beta-1,3-glucanase, and examined its effect on human peripheral blood monocytes. Conditioned medium prepared by incubating monocytes (MC-CM) with the beta-1,3-glucan oligomer showed strong inhibitory activity against the proliferation of human leukemic U937 cells. Since the beta-1,3-glucan oligomer had no direct cytotoxic effect on U937 cells up to 1000 microg/ml, the cytotoxicity of the MC-CM may be due to cytotoxic cytokines produced from monocytes stimulated by the beta-1,3-glucan oligomer. On the other hand, the MC-CM prepared with original laminarin had little effect on the growth of U937 cells. The cytotoxicity of the MC-CM prepared with the beta-1,3-glucan oligomer was significantly reduced by an anti-TNF-alpha antibody, but the anti-TNF-beta antibody had no effect. Our results suggest that the enzymatically depolymerized beta-1,3-glucan oligomer induces TNF-alpha production from human monocytes.     

Study on chemical structures of poly (tetrafluoroethylene-co-perfluoroalkylvinylether) by soft-EB irradiation in solid and molten state

Poly (tetrafluoroethylene-co-perfluoroalkylvinylether) (PFA) was irradiated by soft electron beam (soft-EB) under nitrogen gas atmosphere in solid-state and its molten state, respectively. The changes of thermal property and chemical structures of irradiated PFA in solid-state and molten state were studied by differential scanning calorimetric analysis (DSC) and solid-state ¹⁹F magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. By DSC analysis, the melting temperature shifted to lower temperatures, and crystallinity decreased with increasing soft-EB dose. By solid-state ¹⁹F MAS NMR spectroscopy, the new signals was observed and the detected new signals in irradiated PFA at 315 °C and at 30 °C were due to the tertiary carbon group with branching site (Y-type crosslinking site), perfluoro-propylene site and chain end methylene groups, respectively.Moreover, the molar ratio of perfluoroalkylvinylether (FAVE) structure to -CF₂- units decreased with increasing dose.     

Nonintrusive appliance load monitoring based on integer programming

This paper presents a new nonintrusive appliance load monitoring technique based on integer programming. Nonintrusive appliance load monitoring is the problem of identifying the operating conditions of electric appliances in a house by observing only the overall load current and voltage. Since the overall load current is expressed as a superposition of the currents of the operating appliances, the monitoring problem can be formulated as an integer quadratic programming problem by expressing the operating conditions as integer variables. This problem is solvable with a sufficiently small computational burden thanks to the recent development of commercial software. The proposed method does not require relearning even when a new appliance is installed in the house. Furthermore, the proposed formulation is applicable to cases in which some appliance has multiple modes, and cases in which some appliances of the same type are operating simultaneously. The usefulness of the proposed technique is verified by experimental results. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(2): 18–25, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21040     

Preparation of diamondlike carbon films using nanopulse generator employing SI thyristor

Diamondlike carbon (DLC) films show high hardness, high electric resistivity, and the self‐lubricant characteristic, and many applications and synthesis methods have been reported. Pulse plasma chemical vapor deposition (CVD) is one of the synthesis methods suitable for DLC films on complicated form work, such as molding and extruding die. Ordinary, microsecond‐order pulse is used in this method. This paper describes the development of the synthesis method using nanosecond‐order pulse plasma CVD for DLC films. To realize this process, a static induction (SI) thyristor with an inductive energy storage (IES) circuit was used. Compared with microsecond, nanosecond‐order pulse plasma CVD method shows the characteristics of high electron temperature and exponential relationship between pulse frequency and growth rate. The characteristics of the thus‐obtained DLC films show two broad peaks of the disordered band at 1360 cm^?1 and the graphitic band at 1580 cm^?1 by Raman spectroscopy and hardness of 16.0 GPa and elastic modulus of 170 GPa. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(4): 1–7, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20341     

Numerical Evaluation of Toughening by Crack-Face Grain Interlocking in Self-Reinforced Ceramics

Crack bridging associated with the pull-out process of interlocking grains in self-reinforced ceramic materials is studied through a micromechanical simulation. The pullout of a single inclined grain is modeled via the numerical solution of a general contact problem. The bridging-force versus crack-opening-distance curve indicates a nonlinear, springlike response for the pullout of interlocking grains. The sliding friction along the debonded interface, induced by highly localized contact stresses, dominates the total bridging force. The bridging force increases with grain inclination until eventual bridge failure. The pullout of misaligned grains mainly affects short-crack toughening, with a rising R -curve, whereas aligned grains contribute to long-crack toughening. The residual stresses of the thermal expansion anisotropy play a minor role in the pull-out process of grain interlocking and the resultant toughening. The proposed mechanism is operative in both single-phase and composite ceramics in which pullout of elongated grains/reinforcements occurs.     

Albumin stabilizes (–)‐epigallocatechin gallate in human serum: Binding capacity and antioxidant property

(–)‐Epigallocatechin gallate (EGCg) is the major component of green tea and is known to show strong biological activity, although it can be easily oxidized under physiological conditions. In this study, we indicate that EGCg is stable in human serum and that human serum albumin (HSA) stabilizes EGCg under aerobic condition. Although EGCg is usually decomposed within 1 h in aqueous solution at neutral pH, EGCg in serum and phosphate buffer (pH 7.4) containing HSA was stable over 1 h, even at neutral and slightly alkaline pH. Under these conditions, EGCg binds to HSA non‐covalently. The sulfhydryl group acts as an antioxidant for EGCg oxidation. Incubation of EGCg with HSA is accompanied by the oxidation of a free sulfhydryl group in HSA. These results suggest that the antioxidant property and the binding capacity of HSA contribute to the stabilization of EGCg in human serum.