Fundamental Behavior of Direct-Coupled Submicrosecond Pulse Energization in Electrostatic Precipitators

The fundamental characteristics of the direct-coupled pulse energization in electrostatic precipitators (EP's) are investigated in a test rig comprised of a coal pulverizing facility, a furnace, a gas cooling system, and an EP. The EP consisted of a corona electrode with barbed wires and a collection electrode with 300-mm duct spacing. This simulates the type of EP normally used in a coal-fired power station. The pulse-energized collection field shows a very high collection performance of more than 99 percent collection efficiency and the performance enhancement compared to the conventional dc energization, causing very severe back corona, becomes as large as H = 2.50.H is the enhancement factor in terms of the Deutsch migration velocity in the case of the very high resistivity dust of rd = 2 x 1013 ?cm at the gas temperature of Tg = 150°C. Even at the lower level of the dust resistivity at Tg = 110°C, where no back corona occurs in the dc-energized collection field, the performance enhancement is as large as H = 1.21. The mechanism of such great performance enhancement is likely to be the result of the very uniform and very intense formation of corona plasmas on the wires as a result of the very fast rise in the pulse voltage applied and a special sawtooth waveform of the operating voltage between the corona and collection electrodes.     

Molecular dynamics simulation of 〈<Emphasis Type="Bold">c</Emphasis>+<Emphasis Type="Bold">a</Emphasis>〉 dislocation core structure in hexagonal-close-packed metals

The core structures of 〈c+a〉 dislocations in hexagonal-close-packed (hcp) metals have been investigated by molecular dynamics (MD) simulation using a Lennard-Jones-type pair potential. The 〈c + a〉 edge dislocation has two types of core at 0 K; one is a perfect dislocation (type A), and the other has two 1/2 〈c+a〉 partials (type B). Type A transforms to type B by abruptly increasing temperature from 0 K to 293 K, while type B is stable in temperature range from 0 K to 293 K. In contrast, type A extends parallel to (0001) at 30 K, and this extended core is still stable at 293 K. These results suggest that the 〈c+a〉 edge dislocation glides on the {11 2} as two 1/2 〈c+a〉 partial dislocations and becomes sessile due to changes of the core structure. The 〈c+a〉 screw dislocation spreads over two {10 1} planes at 0 K. The core transforms into a unsymmetrical structure at 293 K, which is spread over {11 2} and {10 1}, and core spreading occurs parallel to {11 2} at 1000 K. A critical strain to move screw dislocations depends on the sense of shear strain. The dependence of the yield stress on the shear direction can be explained in terms of these core structures. This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Simultaneous three-dimensional step-height measurement and high-resolution tomographic imaging with a spectral interferometric microscope

A noncontact, nonmechanical scanning, wide-field spectral interference microscope is developed for simultaneous measurement of three-dimensional step-height of discontinuous objects and tomographic imaging. A superluminescent diode (SLD) is used as a broadband light source and a liquid-crystal Fabry-Perot interferometer (LC-FPI) as a frequency-scanning device. By means of changing the injection current to the SLD, the spectral profile of the SLD is equalized, and a constant light input to the interferometer is achieved over the entire frequency-scan range. The Fourier-transform technique is used to determine both the amplitude and the phase of spectral fringe signals. Three-dimensional height distribution of a discontinuous object is obtained from the phase information, whereas optically sectioned images of the object are obtained either from the amplitude information alone or from the combination of both the amplitude and phase information. Experimental results with submicrometer resolution are presented for both step-height measurement and tomographic sectioning.     

Travel Time Reliability in Vehicle Routing and Scheduling with Time Windows

This paper presents calibration of the Vehicle Routing and scheduling Problems with Time Windows-Probabilistic (VRPTW-P) model which takes into account the uncertainty of travel times. Probe vehicle data of travel times were obtained from usual operation of pickup-delivery trucks in South Osaka area. The optimal solution of the VRPTW-P model resulted in reducing total cost, running times and CO₂, NOx and Particle Materials (PM) emissions compared with the usual operation. This is attributed to better routing of VRPTW-P to choose more reliable roads. Therefore, VRPTW-P can contribute to establish efficient and environmentally friendly delivery systems in urban area.     

COCOVILA – Compiler-Compiler for Visual Languages

A compiler-compiler for visual languages is presented. It has been designed as a framework for building visual programming environments that translate schemas into textual representation as well as into programs representing the deep meaning of schemas. The deep semantics is implemented by applying attribute grammars to schema languages; attribute dependencies are implemented as methods of Java classes. Unlike compiler-compilers of textual languages, a large part of the framework is needed for support of interactive usage of a visual language.     

Effect of Pressure on the Out-of-Plane Critical Current and T c of Bi-2201 and Bi-2212 Single Crystals

We used the hydrostatic pressure P <1 GPa as a tool to change the c-axis critical current (interlayer coupling) of Bi-2201 and Bi-2212 single crystals. The c-axis critical current drastically increases with pressure (up to 270 % GPa ^–1 ). The superconducting critical temperature, on the contrary, only slightly increases with a rate of 2-6 % GPa ^–1 . This implies that the CuO-interlayer coupling has little effect on T _c in Bi-compounds.     

High-resolution full-color LCD driven by OTFTs using novel passivation film

A full-color twisted-nematic type liquid crystal display (TN-LCD) of 1.4-in diagonal size driven by organic thin-film transistors (TFTs) has been fabricated. This TN-LCD has 80/spl times/80/spl times/3 (RGB) pixel arrays addressed by pentacene TFTs with a channel width of 50 /spl mu/m. The contact resistance between the pentacene film and the source/drain electrodes has been reduced by selecting the exposure condition of the photoresist in patterning the electrodes. In addition, a solution-processed passivation film with a novel structure, consisting of photosensitive polyvinylalcohol and organosiloxane glass resin, has been developed to protect the TFTs against degradation induced by integration with TN-LCD devices. Consequently, it has been confirmed that the organic-TFT-driven TN-LCD fabricated in this paper is capable of displaying full-color moving images at a resolution of 80 pixels per inch.     

Nucleotide sequencing analysis of the 146-kilobase segment around the IkBL and MICA genes at the centromeric end of the HLA class I region

The biomechanics of medialization laryngoplasty are not well understood. An excised canine larynx model was used to test the effects of various sized silicon implants. The vocal fold length, position, and tension were measured. Medialization laryngoplasty did not affect vocal fold length. At the mid-membranous vocal fold, larger shims resulted in greater medialization and tension. Medialization laryngoplasty neither medialized nor stiffened the vocal process to resist lateralizing forces. We conclude that medialization laryngoplasty provides bulk and support for defects of the membranous region of the vocal fold, but does not appear to close a posterior glottal gap. The selection of a surgical procedure to treat glottal incompetence should take into account the unique biomechanical properties of the anterior (membranous vocal folds) and posterior (cartilaginous portion) glottis.     

Chiral separation of amines by high-performance liquid chromatography after tagging with 4-(N,N-dimethylaminosulphonyl)-7-(2-chloroformylpyrrolidin-1-yl)- 2,1,3-benzoxadiazole

Chiral tagging reagents, 4-(N,N-dimethylaminosulphonyl)-7-(2-chloroformylpyrrolidin-1 -yl)-2,1,3- benzoxadiazole (R(+)-DBD-Pro-COCl and S(-)-DBD-Pro-COCl), react with mirror image enantiomers of amines to produce corresponding diastereomers in the presence of pyridine as a catalyst. The maximal excitation and emission wavelengths of the resulting diastereomers were ca. 450 nm and 560 nm, respectively. The diastereomers derived from some aliphatic amines were resolved by a reversed-phase chromatography with water-acetonitrile or normal-phase chromatography with n-hexane-ethyl acetate as the eluent. The reactivities of both enantiomers of DBD-Pro-COCl to chiral amines were almost comparable, whereas a slight difference of fluorescence intensity was observed with S(-)-DBD-Pro-COCl. When (S-)-DBD-Pro-COCl was used as the derivatization reagent, amines corresponding to S-configuration were eluted faster than R-configuration. The opposite elution order was obtained with the use of R(+)-DBD-Pro-COCl, instead of S(-)-DBD-Pro-COCl. The Rs values obtained from 1-cyclohexylethylamine (CEA) having aliphatic ring structure was larger than those of amines (1-(1-naphthyl)ethylamine (NEA) and 1-phenylethylamine (PEA)) having aromatic ring structures.     

In situ morphology of fetal aortic isthmus following ductal constriction in rats

Obese female subjects with binge eating disorder BED; (N = 107) completed the Beck Depression Inventory, Symptom Checklist-90, Inventory of Interpersonal Problems, and Rosenberg Self-Esteem Scale. Subjects were divided into moderate or severe binger on the basis of scores on the Binge Eating Scale, and grouped into moderately or severely obese by performing a median split on their weights. Spearman correlational analyses were performed to determine the relationship between psychopathology and obesity and psychopathology and binge eating. Analyses of variance (ANOVAs) were then performed using scores on the psychological measures with subjects grouped both by severity of obesity and severity of binge eating. The results indicated that in our sample, obesity and scores on the measures of psychiatric symptomatology were unrelated. However, a significant positive relationship was found between binge eating severity and degree of psychiatric symptomatology. We suggest that binge eating may account for the observed relationship between obesity and psychopathology reported in previous studies. We discuss the importance of assessing BED when conducting research with obese individuals.