Joint server and network optimization toward load‐balanced service chaining

Prior service chaining systems address server and network load balancing issues individually, which may not ensure efficient system performance. To this end, in this paper, we study the design, implementation, complexity analysis, and evaluation of Nearest First and Local‐Global Transformation algorithm, which jointly supports server and network load balancing for chaining virtualized network functions (VNFs) in data center environment. The algorithm firstly constructs service chains by a greedy strategy, which both considers server and network latency. Then a searching technique, which replaces a selected VNF with another candidate and swaps the order of VNFs in service chains, is applied to improve the solutions. We have implemented the algorithm using Software‐defined networking and OpenFlow concepts. The numerical results indicate that, compared with a sequential approach, Nearest First and Local‐Global Transformation increases the system bandwidth utilization up to 45%. The results also show that it is worth applying the second phase of our algorithm since it considerably enhances the system performance by 20%.     

Synthesis and properties of natural rubber modified with stearyl methacrylate and divinylbenzene by graft polymerization

The graft polymerizations of stearyl methacrylate (SMA) and divinylbenzene (DVB) onto natural rubber (NR) were carried out in a solution process using benzoyl peroxide (BPO) as an initiator in toluene or chloroform. The main products of the grafted NR include an uncrosslinked (sol) part [sol(SMA–NR–DVB): s‐SNRD] and a crosslinked (gel) part [gel(SMA–NR–DVB), g‐SNRD]. s‐SNRD was obtained by extraction using tetrahydrofuran. It was identified by IR and ¹H‐NMR spectroscopies. The glass transition temperature (T_g) and thermal properties of s‐SNRD and g‐SNRD were studied by DSC and TGA. The glass transition temperature and thermal decomposition temperature of s‐SNRD and g‐SNRD were higher than were those of NR. The light resistance and weatherability of s‐SNRD were measured with a Weather‐o‐Meter. The light resistance and weatherability of s‐SNRD are better than are those of NR. The effects of the initiator concentration, mol ratio of SMA to DVB, reaction time, temperature on grafting ratio, and crosslinking ratio were investigated. The highest grafting ratio and crosslinking ratio in the graft polymerization of SMA and DVB onto NR were obtained when the mol ratio of SMA to DVB and BPO were 4.0 and 2 wt %, at 80°C for 48 h, respectively. Following several studies on oil‐absorptive polymers in our laboratory, 9 the oil absorptivity of g‐SNRD was examined using crude oil. The oil absorptivity of g‐SNRD was 600% when the immersion time was 10 min. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2464–2470, 2001     

Synthesis and properties of styrene–EPDM–vinyl acetate graft polymer

The styrene–EPDM–vinylacetate (SEV) graft polymer, which linked respectively the styrene (St) unit and vinylacetate the (VAc) unit to the ethylene–propylene–diene terpolymer (EPDM) backbone was synthesized by two‐step graft polymerizations: First the graft polymerization of VAc onto EPDM was carried out, and then St was added successively in the prepolymerized solution and further polymerized for a given period to obtain SEV. The effects of concentration of EPDM and an initiator, mole ratio of VAc to St, polymerization time, temperature, and solvent were examined on the graft polymerizations. The synthesized graft polymers (SEVs) that have different contents of St or VAc were identified by Fourier transform IR spectrum. The highest graft ratio has been obtained by 10 wt % of EPDM, 1.0 mole ratio of VAc to St, and 1.0 wt % of BPO in toluene for 48 h at 70°C. The glass transition temperature of SEV is lower than that of poly(vinyl acetate) (PVAc) and polystyrene (PS). The thermal stability of SEV is higher than that of PVAc, PS, and the acrylonitrile–butadiene–styrene (ABS) resin. The tensile strength of SEV was improved as compared with that of EPDM. The light resistance and weatherability of SEV were better than those of ABS. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2296–2304, 2000     

A Size-Dependent Functionally Graded Higher Order Plate Analysis Based on Modified Couple Stress Theory and Moving Kriging Meshfree Method

A size-dependent computational approach for bending, free vibration and buckling analyses of isotropic and sandwich functionally graded (FG) microplates is in this study presented. We consider both shear deformation and small scale effects through the generalized higher order shear deformation theory and modified couple stress theory (MCST). The present model only retains a single material length scale parameter for capturing properly size effects. A rule of mixture is used to model material properties varying through the thickness of plates. The principle of virtual work is used to derive the discrete system equations which are approximated by moving Kriging interpolation (MKI) meshfree method. Numerical examples consider the inclusions of geometrical parameters, volume fraction, boundary conditions and material length scale parameter. Reliability and effectiveness of the present method are confirmed through numerical results.     

Oxorhenium-mediated assembly of noncyclic selective integrin antagonists: a combinatorial approach

The parallel oxorhenium-mediated assembly of 288 noncyclic RGD analogues is reported. All complexes contain a NS(2) +S chelating motif that enables the unambiguous coordination of the oxorhenium and oxotechnetium cores. In this study, "modules S" contain a variety of pending guanidinium groups whereas the "NS(2) modules" are made of a series of N-acylated amino acids. Combination of sets of "NS(2) " and "S modules" together with tetrabutylammonium tetrachlorooxorhenate gave the corresponding oxorhenium complexes in good yields and satisfactory purities. Evaluation of these metalloconstructs towards integrins α(V) β(3) , α(IIb) β(3) , and α(V) β(5) led to the identification of micromolar and submicromolar antagonists of theses integrins. These compounds exhibit interesting selectivities and promise attractive applications for the molecular imaging of integrin-dependent pathologies.     

Performance Analysis of Rayleigh Fading Channel in the Presence of Co-channel Interference with Multiple Interferers Under Different Adaptation Policies

In this paper, an approach to performance analysis on signal-to-interference ratio operating over Rayleigh fading channels experiencing an arbitrary number of multiple, Rayleigh co-channel interferers is presented. We have presented a general analysis of selection combining, where each branch experiences an arbitrary number of multiple equal power co-channel interference. Useful closed-form expressions are derived for the probability density function and cumulative distribution function at the output of the combiner. Also, outage analysis is performed in order to show the effects of interferers and diversity order. Capacity per unit bandwidth expressions are derived for selection diversity scheme under different adaptation policies.     

High Performance Three‐Dimensional Chemical Sensor Platform Using Reduced Graphene Oxide Formed on High Aspect‐Ratio Micro‐Pillars

The sensing performance of chemical sensors can be achieved not only by modification or hybridization of sensing materials but also through new design in device geometry. The performance of a chemical sensing device can be enhenced from a simple three‐dimensional (3D) chemiresistor‐based gas sensor platform with an increased surface area by forming networked, self‐assembled reduced graphene oxide (R‐GO) nanosheets on 3D SU8 micro‐pillar arrays. The 3D R‐GO sensor is highly responsive to low concentration of ammonia (NH₃) and nitrogen dioxide (NO₂) diluted in dry air at room temperature. Compared to the two‐dimensional planar R‐GO sensor structure, as the result of the increase in sensing area and interaction cross‐section of R‐GO on the same device area, the 3D R‐GO gas sensors show improved sensing performance with faster response (about 2%/s exposure), higher sensitivity, and even a possibly lower limit of detection towards NH₃ at room temperature.     

Mechanical properties of continuous bamboo fiber-reinforced biobased polyamide 11 composites

This study is devoted to the analysis of the properties of continuous bamboo fiber (BF)-reinforced polyamide 11 (PA 11) composites. The SEM observations highlighted continuity between BFs and the polymeric matrix showing a high density of hydrogen bonds. The comparative calorimetric study of the matrix and its composites showed that the crystallinity of PA 11 was not modified by the presence of bamboo fibers. The physical aging observed in PA 11 is no more observed in composites due to physical interactions between PA 11 and BFs. The mechanical properties were investigated by tensile strength and dynamic mechanical analysis. The introduction of BFs enhanced Young's modulus of the matrix by a factor of 10. The presence of BFs also improved the storage shear modulus G′ over the whole temperature range. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47623.     

New Machine Learning Ensemble for Flood Susceptibility Estimation

Water Resources Management - Floods are among the most severe natural hazard phenomena that affect people around the world. Due to this fact, the identification of zones highly susceptible to...