0.5级电子式电能表的设计与实现

本文论述了一种普及型电子式电能表的设计原理和实现方法，具体讨论了时分割乘法器和电流互感器的组成和误差分析，最后给出测试结果。     

Establishment and characterization of three cell lines from Aedes triseriatus (Diptera: Culicidae)

The objectives of this study were to develop sex-, age-, and body size-specific nomograms and partition values for upper and lower limits of M-mode echocardiographic aortic root measurements derived from a large population-based cohort. The study sample consisted of 1433 male and 1816 female participants in the Framingham Heart Study and Framingham Offspring Study who were normotensive and free of clinically apparent heart disease at the baseline examination. Aortic root measurements were obtained by M-mode echocardiography by a leading-edge to leading-edge technique. The relations of age and measures of body size with aortic root dimensions were evaluated with sex-specific correlations and multiple stepwise linear regression analyses. Age was the most important determinant of aortic root size in both men and women in the multivariable regression models. Models with age and body surface area yielded R2 values of 0.214 in men and 0.222 in women. Models with age and height yielded lower R2 values of 0.136 in men and 0.181 in women. Thus aortic root dimensions vary widely with the age, sex, and body size of individuals. Sex-specific reference nomograms of aortic root dimensions in relation to age and body size (body surface area or height) are presented to facilitate the detection of abnormalities of aortic root size.     

Sensitivity analysis of free torsional vibration frequencies of thin-walled i-beam resting on elastic foundation

The sensitivity analysis of natural frequencies of torsional vibration of thin-walled I-beams resting on a Winkler-type elastic foundation and subjected to axial static loads is discussed. The first-order variation of the frequencies due to the design variable variations is derived. The cross- ection dimensions, the beam material constants and the foundation stiffness are assumed to be the design variables. The considerations are based on the theory of thin-walled beams with nondeformable cross-section. The underintegral sensitivity coefficients of the flange width and the foundation stiffness variations for a simply supported I-beam are determined. An accuracy of approximation of the natural frequencies changes due to the design variable change, by means of their first-order variations, is also investigated.     

含能材料分子结构与感度的相关性

综述了国外近年来含能材料分子结构参数与感度相关关系的最新研究成果。研究表明：某些芳香族硝基化合物的撞击感度与Ｃ－ＮＯ２键强度有关；硝胺及脂肪族硝基化合物的冲击波感度与分子中Ｎ－ＮＯ２键的数目，长度和分子量相关。     

用于多种组装技术的厚膜导体复合结构

厚膜导体Ｐｄ－Ａｇ／Ａｕ、Ｐｔ－Ｐｄ－Ａｕ／Ａｕ平面复合结构，Ｐｄ－Ａｇ／Ａｕ立体复合结构可使多种组装技术相互兼容。立体复合结构还可有效地降低导体线电阻，减少线损耗。而且，其超声键合性尤佳     

野外观测系统的检验与校正

在地震资料处理中常常发现野外观测系统不准,其后果极为严重。为了避免重复施工,改善处理效果,笔者在IBM3081系统上编制了利用初至波对野外观测系统进行检验和校正的程序。文中介绍了两种校正方法:其一是只作炮检距校正。根据工区的小折射、井口时间、反射记录等资料提供一条或几条比较准确的初至时距曲线,作为标准曲线,然后将从实际共炮点道集中拾取的初至曲线与标准初至时距曲线相比较,确定出实际初至曲线所对应的炮检距,并对各个地震道的空间属性进行修改。对某三维工区的处理结果表明,该方法的效果良好。其二是先用迭代方法加误差约束条件计算炮点和检波点的坐标,然后计算炮检距,再进行校正。这种校正处理的效果也是明显的。但实验表明,对于观测系统误差较大的数据,不宜作坐标计算,只作炮检距校正尚可完成部分校正。处理中要根据数据的性质选取校正方法。     

Analysis of the detectivity for triple-layer heterojunction GaSb/GaInAsSb infrared detectors

In this paper, the detectivity is calculated and analyzed with the front-or backside illuminated case for both N-GaSb/p₂-Ga_0.8In_0.2As_0.19Sb_0.81/p₁-Ga_0.9In_0.1As_0.09Sb_0.91 and N₁-GaSb/n₂-Ga_0.9In_0.1As_0.09Sb_0.91/p-Ga_0.8In_0.2As_0.19Sb_0.81 infrared photovoltaic detectors, respectively. The analysis results show that the main absorption appears in the p-type Ga_0.8In_0.2As_0.19Sb_0.81 material with either front- or backside illuminated case for above two structures. In each structure, the carrier concentration obviously affects the detectivity. The carrier concentration in the wide-bandgap material for the isotype heterojunction should be reduced as low as possible to reduce the tunneling rate at the isotype heterointerface. Moreover, the change of the detectivity with the p-side surface recombination velocity for the N₁-n₂-p structure is more sensitive than that with the p₁-side surface recombination velocity for the N-p₂-p₁ structure. In the N-p₂-p₁ structure with the incident light from the p₁-side surface, two-color detection is achieved.     

奥氏体耐热钢21-4N碳化物析出行为研究

通过对奥氏体耐热钢21-4N碳化物析出行为的研究,探讨了对性能的影响,提出了改善其综合性能的措施和方法.     

Densitometry determination of dioxins using gold nanoparticlemodified dioxin response element probes

This study aims to develop a rapid and sensitive densitometry bioassay of dioxins. It is known that dioxin ligand can bind heterodimeric aryl hydrocarbon receptor (AhR) and trigger the formation of the complex of dioxin-AhR, AhR nuclear translocator (Arnt), and dioxin-responsive element (DRE). We have established a rapid and sensitive method using nanoparticle-modified DRE probes based on dioxin-dependent binding of DRE to AhR complex. Dioxins can trigger the binding of nanoparticle-modified DRE probe to AhR complex. The nanoparticle-modified DRE probes in the dioxin-AhR-Arnt-DRE complexes immobilized on the microplates were detected by measuring optical density after silver enhancement. Results showed that as little as 0.01 pM of TCDD could be detected. Dioxins could be quantified accurately with the linear range from 1 nM to 0.01 pM. The coefficient of variation was 5≈8% in this bioassay. The optical density of nanoparticle-based silver enhancement was produced in a dose- and time- dependent manner. The dioxin concentrations in fly ash samples determined by this bioassay were comparable with that by the standard HRGC/HRMS. Thus this bioassay is a sensitive and convenient cell-free bioassay of dioxin that is suitable for screening of dioxins in environmental or food matrices.