Tailoring the properties of deposited thin coating and print features in flexography by application of UV-ozone treatment

Printed functional materials are a rapidly growing area of interest for low-cost high-speed device manufacture with flexographic printing seen as a route to achieving this. The relationship between surface tension of the ink and surface free energy (SFE) of the photopolymer plate is a key for optimum performance. However, traditional methods of surface tension modification of the ink/coating often cannot be employed for functional inks. In this research, rapid, permanent modification of flexographic printing plate’s SFE is achieved through controlled UV-ozone treatment, and the effects of the treatment on the polar and dispersive component of SFE are analyzed by Fourier transform infrared attenuated total reflectance spectroscopy, swelling experiments, and roughness measurements. Printing trials using the modified printing plates reveal improved print uniformity and control of deposited ink layer thickness, as well as improved print features—particularly track and pad junctions which can be problematic for printed electronic applications. The ability to rapidly tailor printing plate SFE is of benefit to all volume printing applications. Furthermore, it is of critical importance for functional printing and printed electronics where surface tension of the ink is determined by the functional material and chemical modification is not possible or desirable.     

Phase equilibria studies in the CaO–SiO2–Al2O3–MgO system with CaO/SiO2 ratio of 0.9

Phase equilibria and liquidus temperatures in the CaO–SiO₂–Al₂O₃–MgO system at a CaO/SiO₂ weight ratio of 0.9 in the liquid phase have been experimentally determined employing high-temperature equilibration and quenching technique followed by electron probe X-ray microanalysis. Isotherms at 1573, 1623, 1673, and 1773 K were determined and the primary phase fields of wollastonite, melilite, olivine, periclase, spinel, and corundum have been located. Compositions of the olivine and melilite solid solutions were analyzed and discussed. Comparisons between the newly constructed diagram, existing data, and FactSage predicted phase diagrams were performed and differences were discussed. The present study will be useful for guidance of industrial practices and further development of thermodynamic modeling.     

Bioraffinerien auf Basis schwach verholzter Biomasse

Weakly lignified biomass, like brewers' spent grain and grass silage, is good feedstock for biorefineries. The biomass can be separated and converted into valuable products in different ways. In this study, brewers' spent grain is used to investigate solid state fermentations with Cellulomonas uda. Additionally, hydrothermal pretreatment and subsequent enzymatic saccharification, as well as formation of inhibitory compounds, is demonstrated. Hydrothermal pretreatment combined with simultaneous saccharification and fermentation is shown as an example for the utilization of grass silage.     

Predicting shrinkage and warpage of fiber-reinforced composite parts

One major problem that arises in the design of plastic parts, especially those that are fiber reinforced, is the change of shape and dimension as a result of shrinkage and warpage. These material inhomogeneities are caused by flowinduced fiber orientation, curing, poor thermal mold lay-out, and other processing conditions. This paper presents a simulation that predicts shirnkage and warpage of 3-D compression molded fiber reinforced composite parts. The simulation represents the structure with the 3-noded shell elements used in mold filling simulations. The calculated results indicate that fiber orientation strongly affect the final properties, which vary with different chage locations, have a significant effect on warpage. Unsymmetric curing, caused by uneven mold temperatures, could lead to a thermal moment that could possibly help reduce warpage.     

A Structural Rationale for N-Methylbicuculline Acting as a Promiscuous Competitive Antagonist of Inhibitory Pentameric Ligand-Gated Ion Channels

Bicuculline, a valued chemical tool in neurosciences research, is a competitive antagonist of specific GABA_A receptors and affects other pentameric ligand-gated ion channels including the glycine, nicotinic acetylcholine and 5-hydroxytryptamine type 3 receptors. We used a fluorescence-quenching assay and isothermal titration calorimetry to record low-micromolar dissociation constants for N-methylbicuculline interacting with acetylcholine-binding protein and an engineered version called glycine-binding protein (GBP), which provides a surrogate for the heteromeric interface of the extracellular domain of the glycine receptor (GlyR). The 2.4 Å resolution crystal structure of the GBP:N-methylbicuculline complex, sequence and structural alignments reveal similarities and differences between GlyR and the GABA_A receptor–bicuculline interactions. N-methylbicuculline displays a similar conformation in different structures, but adopts distinct orientations enforced by interactions and steric blocks with key residues and plasticity in the binding sites. These features explain the promiscuous activity of bicuculline against the principal inhibitory pentameric ligand-gated ion channels in the CNS.     

C/C-SiC component for metallic phase change materials

Thanks to their high energy density and thermal conductivity, metallic Phase Change Materials (mPCM) have shown great potential to improve the performance of thermal energy storage systems. However, the commercial application of mPCM is still limited due to their corrosion behavior with conventional container materials. This work first addresses on a fundamental level, whether carbon-based composite-ceramics are suitable for corrosion critical components in a thermal storage system. The compatibility between the mPCM AlSi₁₂ and the Liquid Silicon Infiltration (LSI)-based carbon fiber reinforced silicon carbide (C/C-SiC) composite is then investigated via contact angle measurements, microstructure analysis, and mechanical testing after exposure. The results reveal that the C/C-SiC composite maintains its mechanical properties and microstructure after exposure in the strongly corrosive mPCM. Based on these results, efforts were made to design and manufacture a container out of C/C-SiC for the housing of mPCM in vehicle application. The stability of the component filled with mPCM was proven nondestructively via computer tomography (CT). Successful thermal input- and output as well as thermal storage ability were demonstrated using a system calorimeter under conditions similar to the application. The investigated C/C-SiC composite has significant application potential as a structural material for thermal energy storage systems with mPCM.     

The influence of processing conditions on the mechanical properties of poly(aryl-ether-ketone)/polybenzimidazole blends

Interest in developing high-performance blends for niche applications has grown significantly in efforts to meet ever-increasing harsh environment demands. In this work, four model poly(aryl-ether-ketone)/polybenzimidazole (PAEK/PBI) blends were chosen to study the influence of premixing methods, processing, and matrix polymers, on their mechanical properties. Among the model poly(ether ether ketone) (PEEK) and PBI blends, mechanical properties are greatly enhanced by melt premixing. The molding process mainly affects the matrix crystallinity, which in turn greatly influences fracture toughness of the blend. Poly(ether ketone ketone) (PEKK) and PBI blend exhibits a slightly lower tensile strength and fracture toughness than PEEK/PBI due to the differences in inherent properties of PEEK and PEKK matrices and their interfacial interaction with PBI. The processing−structure–property relationship of PAEK/PBI blends is established to help guide optimal design of high-performance polymer blends for structural applications. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48966.     

Microbiological characterization of randomly selected Portuguese raw milk cheeses with reference to food safety

Seventy raw milk cheeses made in different regions of Portugal, both hard and soft varieties, made with cow's, ewe's, or goat's milk or combinations of these, were sampled within their quoted shelf lives for microbiological safety. On the basis of the presence or numbers of Escherichia coli, E. coli O157, Staphylococcus aureus, Salmonella, and Listeria monocytogenes, cheeses were categorized as satisfactory, acceptable, unsatisfactory, or unacceptable and potentially hazardous. Twenty-two of the 70 cheeses were classified as satisfactory or acceptable. Thirty-seven of the cheeses were considered unsatisfactory because of the presence of E. coli, S. aureus, or both, while 11 of the cheeses were graded as unacceptable and potentially hazardous because of the presence of excessive numbers of S. aureus, E. coli, or L. monocytogenes and the presence of Salmonella in three of these. All cheeses graded as unacceptable and potentially hazardous were soft or semisoft cheeses made with ewe's and goat's milk, with the exception of two hard cheeses made with cow's milk. E. coli O157 was not detected in any of the cheeses. According to the present results, it seems that the presence or counts of pathogenic or indicator organisms in raw milk cheeses cannot be related to the processing conditions, milk type, or region of production.