Field dependence of impact ionization coefficients in In/sub 0.53/Ga/sub 0.47/As

Electron and hole ionization coefficients in In/sub 0.53/Ga/sub 0.47/As are deduced from mixed carrier avalanche photomultiplication measurements on a series of p-i-n diode layers, eliminating other effects that can lead to an increase in photocurrent with reverse bias. Low field ionization is observed for electrons but not for holes, resulting in a larger ratio of ionization coefficients, even at moderately high electric fields than previously reported. The measured ionization coefficients are marginally lower than those of GaAs for fields above 250 kVcm/sup -1/, supporting reports of slightly higher avalanche breakdown voltages in In/sub 0.53/Ga/sub 0.47/As than in GaAs p-i-n diodes.     

Image segmentation using a texture gradient based watershed transform

The segmentation of images into meaningful and homogenous regions is a key method for image analysis within applications such as content based retrieval. The watershed transform is a well established tool for the segmentation of images. However, watershed segmentation is often not effective for textured image regions that are perceptually homogeneous. In order to segment such regions properly, the concept of the "texture gradient" is introduced. Texture information and its gradient are extracted using a novel nondecimated form of a complex wavelet transform. A novel marker location algorithm is subsequently used to locate significant homogeneous textured or non textured regions. A marker driven watershed transform is then used to segment the identified regions properly. The combined algorithm produces effective texture and intensity based segmentation for application to content based image retrieval.     

Reciprocity in reverberation chamber measurements

Even though reverberation chambers have been used primarily for radiated immunity testing, they are reciprocal devices that are equally applicable for radiated emissions testing. This short paper presents the theory for radiated emissions testing and uses electromagnetic reciprocity theory to demonstrate the link between radiated emissions and immunity testing.     

Automatic quantification of changes in bone in serial MR images of joints

Recent innovations in drug therapies have made it highly desirable to obtain sensitive biomarkers of disease progression that can be used to quantify the performance of candidate disease modifying drugs. In order to measure potential image-based biomarkers of disease progression in an experimental model of rheumatoid arthritis (RA), we present two different methods to automatically quantify changes in a bone in in-vivo serial magnetic resonance (MR) images from the model. Both methods are based on rigid and nonrigid image registration to perform the analysis. The first method uses segmentation propagation to delineate a bone from the serial MR images giving a global measure of temporal changes in bone volume. The second method uses rigid body registration to determine intensity change within a bone, and then maps these into a reference coordinate system using nonrigid registration. This gives a local measure of temporal changes in bone lesion volume. We detected significant temporal changes in local bone lesion volume in five out of eight identified candidate bone lesion regions, and significant difference in local bone lesion volume between male and female subjects in three out of eight candidate bone lesion regions. But the global bone volume was found to be fluctuating over time. Finally, we compare our findings with histology of the subjects and the manual segmentation of bone lesions.     

Room-Temperature Mechanical Properties and Slow Crack Growth Behavior of Mg2Si Thermoelectric Materials

Mg₂Si is of interest as a thermoelectric (TE) material in part due to its low materials cost, lack of toxic components, and low mass density. However, harvesting of waste heat subjects TE materials to a range of mechanical and thermal stresses. To understand and model the material??s response to such stresses, the mechanical properties of the TE material must be known. The Mg₂Si specimens included in this study were powder processed and then sintered via pulsed electrical current sintering. The elastic moduli (Young??s modulus, shear modulus, and Poisson??s ratio) were measured using resonant ultrasound spectroscopy, while the hardness and fracture toughness were examined using Vickers indentation. Also, the Vickers indentation crack lengths were measured as a function of time in room air to determine the susceptibility of Mg₂Si to slow crack growth.     

Railroad track electrical impedance and adjacent track crosstalkmodeling using the finite-element method of electromagnetic systemsanalysis

In a multiple-track railroad, the conductors form mutually-coupled ground return circuits. Accurate electrical circuit analysis, required for signaling, traction, and electromagnetic compatibility analysis, is difficult to achieve because of the variability in the equivalent electrical components from their material properties and environmental conditions. The paper describes an application of the finite element method to the electromagnetic analysis of rail track. After validation by benchmark tests using single rail, single- and three-rail track, the technique is used to predict crosstalk between adjacent tracks of a two-track electric railroad     

Rail track distributed transmission line impedance and admittance:theoretical modeling and experimental results

Frequency-dependent distributed transmission line self and mutual impedances and admittances for a single-track, power-rail electrified railway are obtained by experiment and modeling. Impedance results obtained by numerical calculation from an electromagnetic minimum energy field solution using the finite-element method are compared with analytic impedance models based on the Carson-Pollaczek equations for a stratified, weakly conducting ground and with practical experimental measurements made on a short length of rail track. The running rail self conductances and the power rail to running rail mutual capacitances are also evaluated by the finite-element method and compared with experimental measurements. A physical interpretation of the results is given in terms of conductive and induced ground currents caused by finite ground conductivity and relative permittivity     

Reflectance pulse oximetry measurements from the retinal fundus

Conventional transmission pulse oximetry is a noninvasive technique for the continuous monitoring of arterial oxygen saturation (SaO₂) from peripheral vascular beds such as the finger tip or earlobe. It is proposed to exploit the unique transparency of the ocular media to make reflectance pulse oximetry measurements on the retinal fundus. This technique potentially offers significant advantages over conventional pulse oximetry, primarily in the ability to monitor cerebral, as opposed to peripheral, oxygen saturation. An in vitro system has been developed to simulate the retinal circulation and ocular optics. This system consists of a flexible cuvette located in a model eye and an extracorporeal blood circuit to simulate arterial blood flow. The system was used to investigate the relationship between SaO₂ and the R/IR ratio in reflectance pulse oximetry. To enable in vivo measurements to be made, a standard haptic contact lens was modified to hold the pulse oximeter probe in front of the pupil. In a preliminary study, the lens was fitted to an awake volunteer and cardiac-synchronous signals were detected by the retinal pulse oximeter     

Floating-Gate Circuits for Adaptation of Saccadic Eye Movement Accuracy

In this paper we describe an analog VLSI circuit, fabricatedusing a standard 2 µm, n-well, BiCMOS process,which utilizes floating-gate structures for non-volatile, on-chip,analog parameter storage. This circuit is designed to operatein the context of a hardware model of the primate oculomotorsystem and performs visually-guided, saccadic adaptation. Thechip contains a one-dimensional array of photoreceptors and floating-gatecircuits which are used to map retinal positions to motor outputcommands. The system's functionality is demonstrated by trainingthe chip with several different mapping functions using a supervised-learningtechnique.     

A theoretical study of light emission from nanoscale silicon

In comparing our calculated exciton energies with those obtained from pseudopotential calculations (Ref. 27) and from a previous tight binding calculation (Ref. 30), we stated that the differences between the three semi-empirical calculations arise because of different treatment of the nanocrystal surfaces. This appears not to be correct. Subsequent calculations with variable Si-H parameters have shown that the band gap is actually rather insensitive to the actual value of these. Instead, the important feature appears to be the overall quality of the bulk band structure parameterization. References 27 and 30 use more extensive and higher quality empirical parameterizations for bulk Si than the sp³s∗ model used by us. Repeating our time dependent calculations with an improved sp³d⁵ parameterization results in similar values to those of Refs. 27 and 30 for the exciton energies.¹ The agreement of the sp³s∗ values with experimental photoluminescence energies (Fig. 7) cannot, therefore, be regarded as well understood at this time.^1,2