Solid Yttria-Stabilized Zirconia Films by Pulsed Chemical Vapor Deposition from Metal-organic Precursors

A pulsed chemical vapor deposition from metal-organic precursors (MOCVD) system was used to produce solid zirconia, and yttria-stabilized zirconia (YSZ) films. A total of six candidate metal-organic precursors for zirconia and three for yttria were investigated. Three precursor solutions for YSZ proved suitable for pulsed-MOCVD processing. Layers were deposited on metal, alumina, and porous nickel cermet substrates. Under optimal deposition conditions, precursor conversion efficiency of 90% was achieved using a solution of 3.74 vol% zirconium 2-methyl-2-butoxide + 0.42% yttium methoxyethoxide in toluene. The film growth rate was 7.5 μm·h⁻¹ at 525°C deposition temperature. Two alkoxide precursors produced YSZ layers with material costs under $0.50/(μm·cm²).     

Remote monitoring of different electrical parameters of multi-machine system using PC

This paper describes a PC based centralized monitoring of the running condition of a multi-machine system. This kind of monitoring from remote central location is one of the primary requirements in today’s era of automation. The convergence of embedded system like microcontroller/DSP/FPGA, etc., now-a-days, is adding a new dimension to enhance the capability of the PC based data acquisition. In this present approach, conditions of different parameters of each motor have been measured by dedicated microcontroller based hardware. All these units are connected in a network using bus topology. All parameters are communicated to a remote PC through this bus where user friendly state-of-the-art developed software stores it for display and analysis purposes.     

Peptide‐Based Fluorescent Probes for Deacetylase and Decrotonylase Activity: Toward a General Platform for Real‐Time Detection of Lysine Deacylation

Histone deacetylases regulate the acetylation levels of numerous proteins and play key roles in physiological processes and disease states. In addition to acetyl groups, deacetylases can remove other acyl modifications on lysines, the roles and regulation of which are far less understood. A peptide‐based fluorescent probe for single‐reagent, real‐time detection of deacetylase activity that can be readily adapted for probing broader lysine deacylation, including decrotonylation, is reported. Following cleavage of the lysine modification, the probe undergoes rapid intramolecular imine formation that results in marked optical changes, thus enabling convenient detection of deacylase activity with good statistical Z′ factors for both absorption and fluorescence modalities. The peptide‐based design offers broader isozyme scope than that of small‐molecule analogues, and is suitable for probing both metal‐ and nicotinamide adenine dinucleotide (NAD⁺)‐dependent deacetylases. With an effective sirtuin activity assay in hand, it is demonstrated that iron chelation by Sirtinol, a commonly employed sirtuin inhibitor, results in an enhancement in the inhibitory activity of the compound that may affect its performance in vivo.     

A green and facile one-pot synthesis of Ag–ZnO/RGO nanocomposite with effective photocatalytic activity for removal of organic pollutants

In this study, Ag–ZnO/reduced graphene oxide (Ag–ZnO/RGO) composite was synthesized by a green and facile one-step hydrothermal process. Aqueous suspension containing Ag and ZnO precursors with graphene oxide (GO) sheets was heated at 140 °C for 2 h. The morphology and structure of as-synthesized particles were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and Photoluminescence (PL) spectroscopy which revealed the formation of composite of metal, metal oxide and RGO. It was observed that the presence of Ag precursor and GO sheets in the hydrothermal solution could sufficiently decrease the size of ZnO flowers. The hybrid nanostructure, with unique morphology, obtained from this convenient method (low temperature, less time, and less number of reagents) was found to have good photocatalytic and antibacterial activity. The perfect recovery of catalyst after reaction and its unchanged efficiency for cyclic use showed that it will be an economically and environmentally friendly photocatalyst.     

Synthesis of ethylene and butyl methacrylate-based copolymer by emulsion polymerization

The emulsion copolymerization of ethylene with butyl methacrylate (BMA) was carried out in an aqueous medium at 60 °C under moderate reaction conditions. The polymer system is well controlled with a linear increase in the molecular weight (M_n) versus ethylene feed pressure and narrow molecular weight distributions (>1.36) were observed throughout the copolymerization reaction. The spectroscopic analyses confirm the presence of acrylate functional as well as methylene group in the synthesized poly(ethylene-co-BMA) copolymer. Morphological behavior of poly(ethylene-co-BMA) has been studied using SEM and TEM analyses. Thermal stability of the copolymers was investigated by thermogravimetric analysis and it was observed that the copolymer is stable up to 380 °C. X-ray diffraction analysis confirmed the amorphous behavior of poly(ethylene-co-BMA). Dynamic light scattering measurement confirms the formation of poly(ethylene-co-BMA) nanoparticles. The particle size of copolymer nanoparticles were in the range of 85–108 nm with low polydispersity indexes (>0.2). The viscous and the elastic property of the copolymer were investigated and established that at high temperature elastic behavior predominant over viscous effect. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47994.     

Dynamic mechanical analysis and broadband electromagnetic interference shielding characteristics of poly (vinyl alcohol)-poly (4-styrenesulfonic acid)-titanium dioxide nanoparticles based tertiary nanocomposites

ABSTRACT

Novel tertiary nanocomposite films comprising of poly (vinyl alcohol) (PVA), poly (4-styrenesulfonic acid) (PSSA) and titanium dioxide (TiO₂) nanoparticles (NP_S) were prepared using simple solvent casting method. The structural, thermal, morphological, thermo-mechanical and electromagnetic interference (EMI) shielding properties of PVA/PSSA/TiO₂ nanocomposite films were investigated. The EMI shielding effectiveness (SE) of PVA/PSSA/TiO₂ nanocomposite films in the X and Ku band was found to be 12 dB and 13 dB respectively at 25 wt% TiO₂ NPs loading. These results demonstrate the possible applications of PVA/PSSA/TiO₂ nanocomposite films as low cost, lightweight and flexible material for EMI shielding.     

Energy yield simulations of interconnected solar PV arrays

In this paper, the electrical characteristics of array interconnection schemes are investigated using simulation models to find a configuration that is comparatively less susceptible to shadow problem and power degradation resulting from the aging of solar cells. Three configurations have been selected for comparison: (i) simple series-parallel (SP) array which has zero interconnection redundancy; (ii) total-cross-tied (TCT) array which is obtained from the simple SP array by connecting ties across each row of junctions; it may be characterized as the scheme with the highest possible redundancy; and (iii) bridge-linked (BL) array in which all cells are interconnected in bridge rectifier fashion. The explicit computer simulations for the energy yield and current-voltage distributions in the array are presented, which seem to favor cross-tied configurations (TCT and BL) in coping with the effects of mismatch losses.     

A reaction mechanism for gasoline surrogate fuels for large polycyclic aromatic hydrocarbons

This work aims to develop a reaction mechanism for gasoline surrogate fuels (n-heptane, iso-octane and toluene) with an emphasis on the formation of large polycyclic aromatic hydrocarbons (PAHs). Starting from an existing base mechanism for gasoline surrogate fuels with the largest chemical species being pyrene (C₁₆H₁₀), this new mechanism is generated by adding PAH sub-mechanisms to account for the formation and growth of PAHs up to coronene (C₂₄H₁₂). The density functional theory (DFT) and the transition state theory (TST) have been adopted to evaluate the rate constants for several PAH reactions. The mechanism is validated in the premixed laminar flames of n-heptane, iso-octane, benzene and ethylene. The characteristics of PAH formation in the counterflow diffusion flames of iso-octane/toluene and n-heptane/toluene mixtures have also been tested for both the soot formation and soot formation/oxidation flame conditions. The predictions of the concentrations of large PAHs in the premixed flames having available experimental data are significantly improved with the new mechanism as compared to the base mechanism. The major pathways for the formation of large PAHs are identified. The test of the counterflow diffusion flames successfully predicts the PAH behavior exhibiting a synergistic effect observed experimentally for the mixture fuels, irrespective of the type of flame (soot formation flame or soot formation/oxidation flame). The reactions that lead to this synergistic effect in PAH formation are identified through the rate-of-production analysis.     

Elucidating the Effects of Cu‐Nanoparticles in a Porous Medium vis‐à‐vis Heat Transfer Phenomena

In this paper, a numerical simulation technique is developed to investigate the qualitative and quantitative behaviour of Cu‐nanoparticles in a porous medium vis‐a‐vis the heat transfer enhancements—buoyancy driven flow in a two‐dimensional square cavity, with moving walls is presented. The model utilizes the finite volume approach to solve the Brinkman–Darcy equations for Cu‐nanoparticles in a porous media. Discretization is carried out for convective and diffusive fluxes using Quadratic Upwind Interpolation for Convective Kinematics (QUICK) and central difference schemes, respectively. Tri‐Diagonal Matrix Algorithm is invoked to solve the set of algebraic equations. The Darcy number (Da), Prandtl number (Pr), and volume fraction (χ) are varied from 10^?3 to 10^?1, 3 to 7, and 0% to 20%, respectively. Insight into the cause of variations in isotherms, streamlines, Nusselt number (Nu), and mid‐plane velocities is explicated. The present numerical results are compared with the existing literature and found to be in good agreement. Even though nanoparticles slightly hinder the activity of the fluid, they can augment the average Nu by 90% for Pr = 7, Da = 0.1, and χ = 20% as compared to the absence of nanoparticles. Their efficacy is more prominent for flows with higher Da and Pr. Quantitative values for Nu were obtained for various combinations of Pr, Da, and χ.     

Preferential oxidation of linolenic acid compared to linoleic acid in the liver of catfish (Heteropneustes fossilis andClarias batrachus)

The fate of [1-¹⁴C] linoleic acid and [1-¹⁴C] linolenic acid in the liver slices and also in the liver tissues of live carnivorous catfish,Heteropneustes fossilis andClarias batrachus, was studied. Incorporation of the fatty acids into different lipid classes in the live fish differed greatly from the tissue slices, indicating certain physiological control operative in vivo. The extent of desaturation and chain elongation of linoleic and linolenic acids into long-chain polyunsaturated fatty acids was low. Linolenic acid was oxidized (thus labeling the saturated fatty acid with liberated¹⁴C-acetyl-CoA) in preference to linoleic acid, and this oxidation also seemed to be under physiological control since both of the fatty acids were poorly oxidized in the tissue slices and in the killed fish. These fish can therefore recognize the difference in the acyl chain structures of linoleate and linolenate. The higher oxidation of liolenic acid and poor capacity for its conversion to longer chain, highly unsaturated derivatives indicates a higher demand for the dietary supply of these essential fatty acids in these two species.